McIntosh C22 MK V Preamplifier

The C22 Mk V uses one 12AT7 and five 12AX7A vacuum tubes which can be seen through a glass panel located on the top of the preamp. Knobs and rocker switches operate all control functions while modern LED lights indicate input selection and volume level. The C22 Mk V has two balanced inputs, three unbalanced inputs, one Moving Coil and one Moving Magnet phono inputs, for a total of seven inputs. There are two pairs each of balanced and unbalanced output connections; the two outputs allow sending signals to two separate power amplifiers.

Technical Specifications:

• Number of Channels: 2
• Total Harmonic Distortion: 0.08%
• Frequency Response: +0, -0.5dB from 20Hz to 20kHz / +0, -3dB from 15Hz to 100kHz
• Maximum Volts Out (Balanced / Unbalanced): 16V RMS / 8V RMS
• Sensitivity High Level (Balanced / Unbalanced): 900mV / 450mV
• Sensitivity Phono (Moving Coil): 0.45mV
• Sensitivity Phono (Moving Magnet): 4.5mV
• Signal To Noise Ratio (High Level): 100dB
• Signal To Noise Ratio (Moving Coil): 75dB
• Signal To Noise Ratio (Moving Magnet): 75dB
• Voltage Gain (High Level): 15dB
• Voltage Gain (Moving Coil): 60dB
• Voltage Gain (Moving Magnet): 40dB
• Input Impedance (Balanced / Unbalanced): 44K ohm, 22K ohm
• Balanced Input: 2
• Unbalanced Input: 3
• Phono Input Moving Coil: 1 (adjustable)
• Phono Input Moving Magnet: 1 (adjustable)
• Upgradeable Digital Audio Module: No
• Digital Coaxial Input: 0
• Digital Optical Input: 0
• Digital MCT Inputv0
• Digital USB Input: 0
• HDMI (ARC) Input: 0
• Digital AES/EBU Input: 0
• Balanced Fixed Output: 0
• Balanced Variable Output: 2
• Unbalanced Fixed Output: 0
• Unbalanced Variable Output: 2
• Headphone Output: 1/4" High Drive with Headphone Crossfeed Director (HXD®)
• Input Level Match: No
• Home Theater PassThru: No
• Unbalanced Analog Connector Type: Premium gold-plated solid brass
• Service Port: 0
• Tone Controls: Bass and Treble
• Tone Bypass and Input Assign: Tone Bypass: Yes / Input Assign: No
• RS232 Control Input: No
• Power Control Output: 2 Main, 2 Switched
• Rear Panel Data Port: 5
• Rear Panel IR Sensor Input: Yes
• Multi-Chassis or Single: Single, two layer
• Output Meters: No
• Vacuum Tube or Solid State: Vacuum Tube: (5) 12AX7A and (1) 12AT7
• Power Consumption (On): 50 Watts
• Unit Dimensions (W x H x D): 17.5" (44.45cm) x 6" (15.24cm) x 18" (45.72cm)
• Unit Weight: 25 lbs (11.3kg)
• Shipping Weight: 41.4 lbs (18.8kg)

We endeavour to despatch same day for orders placed up to 1pm on available stock items (items with stock message "Usually dispatched within 24 hours"). Please remember to check with us first for a physical stock check if next day delivery is important to you. Any items with stock message "Usually dispatched within 72 hours" are items that we do not hold in stock but order in from the importer or manufacturer as soon as a customer order is received. Occasionally these may be delayed beyond 72 hours due to importer/manufacturer stock levels but we will inform you as soon as we can if this is the case.

UK Orders

We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge. Non Mainland locations - Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer and are not Free of Charge. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as DPD or UPS.

International Orders

Due to the nature of our products and brand restrictions we are only able to send certain items internationally. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Hifisound or by the courier with a request for any further information required. Customs duties can apply for shipments to any countries outside of the UK depending on where the product you have bought is made. Customers are responsible for all taxes and duties incurred when the items enter their country.

Collect in Store or Home Install

At the request of the manufacturer some items cannot be supplied by mail order but you can click and buy them and then elect to collect them from our store or arrange a home install (if applicable). Applicable items clearly state that they are Collect in store or home install. Once ordered you will receive a message prompting you to contact us by phone or email to arrange for us to deliver and install or to reserve and collect from our store at your convenience, you will also be advised of the delivery time / stock availability as not all Home install / collect in store items are held in stock.