McIntosh MT10 Turntable

A custom tonearm features a rigid, dural-aluminum arm-tube gimbaled in two sapphire (horizontal) and two ceramic (vertical) bearings for the least possible friction. A .5mV moving coil cartridge is included, and features an ebony body with an elliptical stylus. Enjoy a new level of music with the MT10 turntable.

Cartridge Specifications:

• Cartridge Type: Moving Coil, Low Output
• Output Level: 0.5 mV at 5 cm/s
• Load Impedance: 400 to 500 Ohms recommended
• Frequency Response: 20Hz to 50kHz
• Channel Separation: Greater than 30dB at 1Khz
• Compliance: 6 x 10-6 cm/dyne
• Recommended Tracking Force: 2.4 g
• Channel Difference: Less than 0.3dB at 1kHz
• Total Mass: 11 g
• Stylus: Elliptical Diamond
• Cantilever Material: Aluminum

Tonearm Specifications:

• Bearing: Sapphire and Ceramic
• Arm Tube: Dural-Aluminum
• Counterweight: Eccentric
• Adjustments: Vertical Tracking Angle, Antiskate, Azimuth

Turntable Specifications:

• Playback Speeds: 33-1/3, 45 and 78 rpm
• Motor Type: DC Brushless
• Speed Control: Electronic w/ braking feature
• Platter: Silicon Acrylic
• Platter Bearing: Magnetic Suspended Ceramic
• Signal To Noise Ratio: 41dB - 44dB
• Wow & Flutter: 0.10% - 0.15%

Technical Specifications:

• Stereo Outputs Unbalanced: 1
• Power Control Input: 1
• Power Control Output: 1
• Platter Light: Yes
• Speed Control Fine Adjustment: Yes
• Dust Cover Included: No
• Unit Dimensions (W x H x D): 17-1/2" (44.45cm) x 8-13/16" (22.38cm) x 21" (53.34cm)
• Note: Tone Arm Height will vary depending on the type of Cartridge installed.
• Unit Weight: 42 lbs (19 kg)
• Shipping Weight: 63 lbs (28.6 kg)

We endeavour to despatch same day for orders placed up to 1pm on available stock items (items with stock message "Usually dispatched within 24 hours"). Please remember to check with us first for a physical stock check if next day delivery is important to you. Any items with stock message "Usually dispatched within 72 hours" are items that we do not hold in stock but order in from the importer or manufacturer as soon as a customer order is received. Occasionally these may be delayed beyond 72 hours due to importer/manufacturer stock levels but we will inform you as soon as we can if this is the case.

UK Orders

We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge. Non Mainland locations - Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer and are not Free of Charge. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as DPD or UPS.

International Orders

Due to the nature of our products and brand restrictions we are only able to send certain items internationally. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Hifisound or by the courier with a request for any further information required. Customs duties can apply for shipments to any countries outside of the UK depending on where the product you have bought is made. Customers are responsible for all taxes and duties incurred when the items enter their country.

Collect in Store or Home Install

At the request of the manufacturer some items cannot be supplied by mail order but you can click and buy them and then elect to collect them from our store or arrange a home install (if applicable). Applicable items clearly state that they are Collect in store or home install. Once ordered you will receive a message prompting you to contact us by phone or email to arrange for us to deliver and install or to reserve and collect from our store at your convenience, you will also be advised of the delivery time / stock availability as not all Home install / collect in store items are held in stock.