McIntosh MTI100 Integrated Turntable System

Besides the turntable that plays both 33-1/3 and 45 rpm vinyl records, the MTI100 also includes a power amplifier, a vacuum tube preamplifier section, a shielded phono preamplifier, an unbalanced auxiliary input, digital audio coaxial and optical inputs, a Bluetooth receiver, a subwoofer output, stereo speaker outputs for sharing your music with friends, and a headphone jack for personal listening.

Cartridge Specifications:

• Cartridge Type: Moving Magnet
• Output Level: 4mV at 1kHz
• Load Impedance: 47k Ohms
• Frequency Response: 12Hz to 30kHz
• Channel Separation: 30dB at 1kHz
• Compliance: 12 x 10-6 cm/dyne
• Recommended Tracking Force: 2.0 g
• Channel Difference: Less than 1dB at 1kHz
• Total Mass: 6.5 g
• Stylus: Elliptical
• Cantilever Material: Aluminum

Tonearm Specifications:

• Bearing: Cardan bearing arrangement with ball bearings used for lateral and Sapphire/Tungsten for vertical bearing
• Arm Tube: Machined aluminum
• Counterweight: Concentric
• Adjustments: None

Turntable Specifications:

• Playback Speeds: 33-1/3 and 45 rpm
• Motor Type: Permanent magnet AC synchronous
• Speed Control: Manual speed change via a 2 speed pulley
• Platter: Aluminum
• Platter Bearing: Inverted hardened steel shaft and axial ball arrangement with bronze bushing
• Signal To Noise Ratio: 35dB - 40dB
• Wow & Flutter: 0.1%

Technical Specifications:

• Stereo Outputs Unbalanced: 1 (bridged to AMP IN)
• Stereo Inputs Unbalanced: 1
• Digital Coaxial Input: 1
• Digital Optical Input: 1
• Subwoofer Output: 1
• Wireless Input: High Definition Bluetooth 4.2
• Power Control Input: 0
• Power Control Output: 1
• Platter Light: N/A
• Speed Control Fine Adjustment: No
• Power Output per Channel: 50 Watts into 8 Ohms / 80 Watts into 4 Ohms
• Number of Channels: 2
• Speaker Impedance: 4 or 8 Ohms
• Rated Power Band: 20Hz to 20kHz
• Total Harmonic Distortion: Amplifier: 0.2% maximum harmonic distortion at any level from 250 milliwatts to one-half of rated power output, 20Hz to 20kHz;
• 0.5% maximum harmonic distortion at any level from one-half to full rated power output, 20Hz to 20kHz / Preamplifier: 0.2% from 20Hz to 20kHz
• Dynamic Headroom: 1.0dB (8 Ohms) / 1.3dB (4 Ohms)
• Frequency Response +0,-0.7dB: 20Hz to 20kHz
• Signal To Noise Ratio (Moving Magnet): 75dB
• Signal To Noise Ratio (High Level): 90dB
• Damping Factor: 8 Ohms: >200 / 4 Ohms: >100
• Maximum Output (Balanced / Unbalanced): 9V Unbalanced
• Dust Cover Included: No
• Unit Dimensions (W x H x D): 19-1/4” (48.9cm) x 6-3/4” (17.15cm) x 14” (35.6cm)
• Unit Weight: 33.5 lbs (15.2 kg)
• Shipping Weight: 40.5 lbs (18.4 kg)

We endeavour to despatch same day for orders placed up to 1pm on available stock items (items with stock message "Usually dispatched within 24 hours"). Please remember to check with us first for a physical stock check if next day delivery is important to you. Any items with stock message "Usually dispatched within 72 hours" are items that we do not hold in stock but order in from the importer or manufacturer as soon as a customer order is received. Occasionally these may be delayed beyond 72 hours due to importer/manufacturer stock levels but we will inform you as soon as we can if this is the case.

UK Orders

We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge. Non Mainland locations - Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer and are not Free of Charge. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as DPD or UPS.

International Orders

Due to the nature of our products and brand restrictions we are only able to send certain items internationally. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Hifisound or by the courier with a request for any further information required. Customs duties can apply for shipments to any countries outside of the UK depending on where the product you have bought is made. Customers are responsible for all taxes and duties incurred when the items enter their country.

Collect in Store or Home Install

At the request of the manufacturer some items cannot be supplied by mail order but you can click and buy them and then elect to collect them from our store or arrange a home install (if applicable). Applicable items clearly state that they are Collect in store or home install. Once ordered you will receive a message prompting you to contact us by phone or email to arrange for us to deliver and install or to reserve and collect from our store at your convenience, you will also be advised of the delivery time / stock availability as not all Home install / collect in store items are held in stock.