The Ortofon TA-210 tonearm has gone to the next level of reducing unwanted vibrations in the tonearm by adding more damping material in more places when compared to it's younger sibling, the TA-110. Ortofon's extensive knowledge of vibration properties and characteristics in different shapes and materials has been applied for optimization of the TA-210 tonearm

The TA-210 is given a precision machined slit in each end of the aluminum tube. A piece of Ortofon special vibration damping compound is integrated into each slit. The bottom slit has rubber inserts with high vibration damping properties, and the other top-facing slit has a special proprietary TPE compound with excellent damping properties. Due to the use of these two different materials, an extended damping effect is obtained in the largest possible range. Both inserts integrated in the tonearm tube are manufactured at the Ortofon technical facilities in Nakskov, Denmark.

• Supplied with LH-2000E headshell and 6NX-TSW-1010 tonearm cables

• TA-210 is a static balanced gimbal type arm, easy to use and adjust for optimal VTF settings

• TA-210 has a standard 5-pin DIN connector for tonearm cable

• Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g

• TA-210 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template 

Effective Mass:

               5g (Without Headshell) (Mass Of Supplied Headshell = 15.5g)

Effective Length:

               329mm (Stylus - Pivot Point)

Overhang:

               12.4mm

Headshell:

               LH-2000E