Eversolo DAC-Z10 DAC / Stereo Pre-Amplifier / Headphone Amplifier

Eversolo DAC-Z10: The Summit of Audio Architecture

The Eversolo DAC-Z10 integrates a reference-grade DAC, a fully balanced preamplifier, and an intelligent headphone amplifier within a rigid, electromagnetically shielded aviation-grade aluminum chassis.

Reference Performance & Clock Precision

Built on a fully balanced architecture, the DAC-Z10 utilises independent dual AK4191 + AK4499 DAC modules with AKM’s Velvet Sound™ technology, natively supporting up to PCM 768kHz/32Bit and DSD512. To ensure an ultra-low 42μV noise floor, three independent toroidal transformers individually power the left channel, right channel, and system circuitry. Digital timing is anchored by the Eversolo Precision Core™, combining an OCXO temperature-controlled crystal oscillator, Phase-Locked Loop (PLL) technology, and an FPGA for precise clock reconstruction. It also supports external 10MHz and 25MHz high-precision master clocks (50Ω/75Ω) for ultimate stability.

Balanced Preamplifier & R2R Control

The high-performance preamplifier supports XLR and RCA inputs with up to +10dB gain, significantly wide dynamic range, and ultra-low distortion. Volume is governed by a precise R2R resistor array that prevents signal degradation and preserves low-level resolution at any volume. Sound customisation is further refined through 15dB of Left/Right Balance Gain, dual XLR polarity modes, and six selectable digital filter curves.

Isolated Connectivity & Integration

To eliminate ground loops and electrical interference from source components, the DAC-Z10 implements fully isolated hardware circuitry across its extensive digital inputs. This includes isolated USB Audio (PCM 768kHz/DSD512 Native), an isolated AES/EBU input, and dual isolated coaxial inputs (PCM 192kHz/DSD64 DoP). It also features an 8-mode switchable IIS input, dual optical inputs, HDMI ARC/eARC for home theatre integration, and a Qualcomm QCC5125 Bluetooth module for high-fidelity wireless streaming. Physical isolation is rounded out with a dedicated noise-channeling grounding post and 12V Trigger In/Out interfaces for linked system power.

Dedicated Headphone Amplification

The onboard 6.35mm headphone amplifier module features auto-impedance detection and three selectable gain stages. It effortlessly drives demanding audiophile headphones, delivering 1W into 16Ω, 1W into 32Ω, and 0.16W into 300Ω.

Intuitive Interface & Visual Controls

The front panel features an 8.8-inch IPS touchscreen for effortless system management, which can also be operated via a dedicated mobile app. The interface hosts a real-time, illuminated Routing Information Interface that displays the complete internal signal path. Users can personalise their experience with a choice of dynamic spectrum displays, vintage VU meters, and multiple interchangeable volume control knob colours.

HiFi Pig - December 2025

5/5
"Eversolo have done a fantastic job at making a reference DAC here, and it is one of those devices that shows that implementation is everything when it comes to DAC chips. This is an exceptionally clean, detailed, and spacious DAC that is built around AKM chips, and whilst it may not be the most engaging or musical-sounding device, it converts digital signals to analogue in a very precise way. 

The DAC-Z10 has plenty of features built in, a ton of inputs, and a well-thought-out design that keeps everything as clear, and separated as possible which translates to a device which excels in terms of imaging, and channel separation." Read the full review.

Stereonet - February 2026

Applause Award
"The DAC-Z10 represents a meaningful advancement over the Z8 and Z6. Its blend of technical sophistication, feature depth and engagingly transparent sound makes it a serious contender at its price point.

With comprehensive connectivity, robust build quality and intuitive touchscreen operation, it offers both versatility and performance in equal measure. For those seeking a capable and affordable audiophile digital front end with modern integration flexibility, the DAC-Z10 warrants careful consideration." Read the full review.

• Eversolo DAC-Z10 DAC / Stereo Pre-Amplifier User Manual

We endeavour to despatch same day for orders placed up to 1pm on available stock items (items with stock message "Usually dispatched within 24 hours"). Please remember to check with us first for a physical stock check if next day delivery is important to you. Any items with stock message "Usually dispatched within 72 hours" are items that we do not hold in stock but order in from the importer or manufacturer as soon as a customer order is received. Occasionally these may be delayed beyond 72 hours due to importer/manufacturer stock levels but we will inform you as soon as we can if this is the case.

UK Orders

We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge. Non Mainland locations - Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer and are not Free of Charge. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as DPD or UPS.

International Orders

Due to the nature of our products and brand restrictions we are only able to send certain items internationally. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Hifisound or by the courier with a request for any further information required. Customs duties can apply for shipments to any countries outside of the UK depending on where the product you have bought is made. Customers are responsible for all taxes and duties incurred when the items enter their country.

Collect in Store or Home Install

At the request of the manufacturer some items cannot be supplied by mail order but you can click and buy them and then elect to collect them from our store or arrange a home install (if applicable). Applicable items clearly state that they are Collect in store or home install. Once ordered you will receive a message prompting you to contact us by phone or email to arrange for us to deliver and install or to reserve and collect from our store at your convenience, you will also be advised of the delivery time / stock availability as not all Home install / collect in store items are held in stock.