Operation of the VC-S MK II record cleaner is effortlessly simple. First, apply a small amount of cleaning fluid to the record surface using the supplied applicator bottle and set the new, quiet motor spinning. Then use the supplied goats’ hair brush to spread the fluid across the record surface, optionally changing the motor direction to ensure the entire groove is covered. Finally, set the vacuum arm over the record and turn the suction on. Within a few rotations (in both directions), the record side will be cleaned and dry, ready for playing like new.
The accumulated solution that’s sucked through the vacuum is filtered away from the built-in electronics and stored in a 2.5 litre waste container. The fluid level gauge on the side of the VC-S chassis indicates when the tank is nearly full, and discharging the waste liquid is effortlessly simple with the supplied funnel.
The VC-S MK II is supplied with Pro-Ject’s improved cleaning solution, Wash-IT. Wash-IT does not contain alcohol, which can harm record surfaces. Instead it contains only high-purity components, which are 100% eco-friendly, non-toxic and non-flammable. It's also designed to evaporate without leaving any residue on the record surface after drying. After mixing with distilled or demineralised water, one litre of Wash-IT can be used to clean up-to 1,500 records.
The VC-S MK II is supplied with all the accessories you need to get started, including 100ml of Wash-IT. Separate accessories, including an optional dust cover, a 7” record cleaning kit and various sizes of Wash-IT cleaning solution, are also available.
Dimensions (W x H x D):
435 x 335 x 280mm