Pro-Ject Xtension 10

Brand: Pro-Ject

The Xtension 10 is an ideal solution for anyone who is looking for the exceptional sound quality of the standard Xtension in a more compact size and at a more appealing price.

The Xtension 10 incorporates all of Pro-Ject's 20 years experience in turntable design. 

The chassis is made from MDF filled with metal sand, which gives a high mass and is non-resonant. But in addition the turntable also uses magnetic feet, which decouple the main plinth from its base. The result of this combination is a merging of the influential 'mass loaded' and 'floating turntable' design principles.  

Instead of the old-standard adoption of pure metal for a main platter, Pro-Ject researched and uncovered a perfect alloy material, which has then be damped on the inner side with Sorbothane®. Taking this base structure, they've then glued recycled Vinyl records to the top (which act as a perfect mat) and baked this 'sandwich' before precision balancing it. The Xtension 10 subsequently benefits from a wonderfully resonance-free, heavy platter, that runs ultra-silently on an inverted ceramic ball-bearing, with magnetic suspension.  

The base of the included Pro-Ject 10cc Evolution Tonearm also benefits from 'high-mass' technologies, and is isolated from the main board by a sheet of Sorbothane®. To use this tonearm with a wide range of top quality phono cartridges, from 4 to 14g, it comes with a set of 4 different Sorbothane®- damped counterweights.

Finally, the Xtension 10 is also supplied with a beautiful dustcover with adjustable hinges, and is available in three high-gloss lacquer finishes.

•  Super-heavy 22 kg belt drive turntable


•  Mass-loaded magnetic-floating subchassis


•  Precision balanced sandwich-platter


•  Inverted ceramic ball bearing with magnetic support


•  Heavy weight record clamp


•  Extremely low level of natural resonance


•  Perfect decoupling through magnetic feet


•  Electronic speed control 33 / 45 / 78 rpm


•  Tonearm 10cc Evolution made from carbon fibre


•  Inverted tonearm bearings (ABEC 7 quality) 

Speed Selection:

               33 / 45 / 78RPM (Built-In Speed Box DS)

Dust Cover:


Record Clamp:


Tonearm Cable:

               ProJect Connect-IT 5P-C

Tonearm Mass:


Tracking Force Range:

               10 - 30mN

Analogue Outputs:

               1 x RCA (Pair With Ground)

Power Consumption:


Dimensions (W x H x D):

               480 x 235 x 400mm (Lid Closed) / 480 x 495 x 535mm (Lid Open)



£0.00 £3,249.00
Earn 0 reward points

The item has been added to your basket

Continue Shopping
Proceed To Checkout