Precision-milled aluminium clamp holds records securely in-place during cleanings.Please Note: This clamp is designed to be used on Okki Nokki record cleaning machines only and is not suitable for turntables.
AT6011a Anti-Static Record Brush
AT6011a Anti-Static Record Brush. Key Features: Removes harmful dust and contaminants from your vinyl records. Conductive synthetic fibres help to dissipate static. Increases the lifetime of your cartridge and improves your listening experience by reducing surface noise.
AT6012 Record Cleaning Kit. Key Features: Velvet brush pad reaches into grooves. Inner reservoir directs AT634 Record Care Solution into brush pad’s leading edge. Records and styli last longer.
AT6013a Dual-Action Anti-Static Record Brush
AT6013a Dual-Action Anti-Static Record Cleaner. Key Features: Anti-static brush fibres remain straight for deep vinyl groove cleaning. Increase the lifetime of your cartridge and improve your listening experience by reducing surface loss.
AT634a Record care solution. Key Features: Prolongs record and stylus life Simple application Two ounces - 56ml
Brush-IT Carbon Fibre Record Cleaning Brush
Every vinyl lovers essential piece of kit; a brush specially designed to keep your precious vinyl in optimum playing condition; free of atmospheric and residue blemishes (unfortunately there is no total cure for scratches). Simply run this brush around your record to clean the groove out before playing.
Brush-IT Premium Fibre Record Cleaning Brush
For all vinyl lovers out there, the Brush it Premium is an essential accessory to ensure a flawless playing experience. This product features fine carbon-fibre bristles that effectively remove even the smallest dust particles from your records. Additionally, an Earthing wire is attached to reduce electrostatic charging. With Brush it Premium, you can quickly and easily clean your vinyl before each play and enjoy clear music without any noise disturbance. The grounding cable included with the product can be attached to any Earth point within your system, keeping your vinyl records static-free and ensuring clear music playback without any interference.
This brush is made of ultra-fine pole very high quality velvet, specially selected for this purpose. The velvet reaches deep into the record grooves and removes even the finest dust particles. The brush itself can be easily cleaned using the two foam rubber scrapers located on both sides of the plastic brush base.
Dust Cover - VC-S Record Cleaning Machines
This high-quality perspex lid is designed to keep any unwanted dirt and dust off your Pro-Ject VC-S. This durable lid is the perfect partner to keep your VC-S in pristine condition. Please Note: VC-S dust cover is not compatible with the VC-S2 ALU, VC-E, VC-3 or any later versions. This lid comes supplied with hinges.
Dustaway Carbon Fibre & Velvet Record Brush
This state-of-the-art DJ record cleaning brush combines the properties of the Tonar Classic and the Nostatic into one brush. The centre part of the brush is made of ultra-fine pole high quality velvet. This velvet is flanked on both sides by a thick layer of very fine carbon fibres. The carbon fibres remove the static from the record so the dust lays loose and can be easily picked up by the velvet in the middle of the brush even from deep in the record grooves.
Fluid Concentrate For Record Cleaning Machine (3 x 50ml bottles)
Okki Nokki's proprietary formula brings dirt to the surface for easy removal. 50ml of concentrate makes 1L of cleaning fluid when added to distilled water.Please Note: This price is for three bottles.
Micro Hair Record Cleaning Brush
Okki Nokki micro hair record cleaning brush.
The Nostatic Arm is the modern version of the formerly well known “Dust Bug” by Cecil Watts. The Nostatic arm incorporates a carbon fibre brush that removes the static electricity from the record during playback, and at the same time picks up the loose dust before the stylus reaches that part of the record. The Nostatic arm has an earth wire which is connected to the earth of the record player or the amplifier. The height can be easily adjusted to fit most record players. It also has a sliding weight in order to adjust the “dusting force” of the brush. Finally the base of the brush has sticky tape so if preferred it can be stuck to the surface of the record player for easy use.
This brush contains more than one million very fine carbon fibre bristles. The cross section of these bristles is so small that they can easily get into all the nooks and crannies of the record groove. Because the carbon fibre conducts electricity it takes away all the static to earth via the metal handle and the person holding the brush. Then the dust lies loose in the groove so the next set of bristles can easily pick them up and remove them from the record groove.
Stainless Steel clamp holds records securely in-place during cleanings. Please Note: This clamp is designed to be used on the Okki Nokki One record cleaning machine only and is not suitable for turntables.
Plastic Goat's Hair Record Cleaning Brush
Goats hair cleaning brush for all wet cleaning products.
Plastic replacement vacuum arms for Okki Nokki Record Cleaning Machines. Available Arms: 12" Vacuum Tube: Permits cleaning of 12" records (33 RPM) 10" Vacuum Tube: Permits cleaning of 10" records (78 RPM) 7" Vacuum Tube: Permits cleaning of 7" records (45 RPM) Arms are NOT interchangeable i.e. A plastic arm will not replace a metal arm. If in doubt contact us for clarification.
Cleaning your records before every use increases the lifetime of the diamond and improves your listening experience. Key Features: Features two rows of tightly bound carbon fiber bristles Easy to use Lanyard hole for convenience and store
One of the key elements of the Spin Clean Record Washer System MK II; these unique, purpose-built brushes apply the perfect amount of pressure to clean your records thoroughly. These replacement brushes for the Spin Clean Mk II Washer System are sold as a pair; so you can re-new the effectiveness of your Washer System in one simple purchase.
Easy-to-use lint-free washable record-cleaning cloths. These cloths can be washed and re-washed in a washing machine with whites and bleach. Use one for cleaning and another for drying the record surface during each session with the Record Washer System. Fluffy soft, non-abrasive, and 100% cotton; these one-of-a-kind drying cloths add the perfect finish to your “like-new” LPs and 45s. These replacement drying cloths for the Spin Clean Mk II Washer System are sold in a pack of five.
Replacement Velvet Strip Set (2 Pieces)
Set of two replacement velvet strips for cleaning machine vacuum arm. These ensure a tight vacuum seal for maximum dirt removal. Velvet strips on RCM vacuum tubes should be replaced approximately every 200-250 LPs. Even though the strips look fine, the performance of the machine has slowly degraded. The velvet crushes down and hardens if not dried after a cleaning session. Applying new velvet strips returns the unit to its original performance.
Replacement Water Spout For VC-S Record Cleaning Machine
Replacement Spout for the Pro-Ject VC-S. This removable spout is used for when emptying the VC-S's water tank.
Replacement Brush for Pro-ject Sweep it E, made from natural hair.
Sweep-IT E Record Cleaning Brush
Cleaning a record collection can be tiresome, time-consuming or just difficult to keep up with; but it’s an essential task if you want to ensure the best possible sound quality and guarantee a long stylus life. A key part of good maintenance is keeping dust out of your grooves, as too much debris in a record groove can easily stick to the pick-up stylus and cause unwanted artefacts in the sound. There are many ways to reduce the amount of dust inside a record groove, but few are as convenient as Sweep-IT E. Key Features: Gently cleans your vinyl while playing Heavy weight stand for secure standing Easy setup Brush made of natural hair Durable materials Elegant looks Uni-pivot design Follows the record grooves 63mm clearance required
Sweep-IT S2 Record Cleaning Brush
Cleaning a record collection can be tiresome, time-consuming or just difficult to keep up with; but it’s an essential task if you want to ensure the best possible sound quality and guarantee a long stylus life. A key part of good maintenance is keeping dust out of your grooves, as too much debris in a record groove can easily stick to the pick-up stylus and cause unwanted artefacts in the sound. There are many ways to reduce the amount of dust inside a record groove, but few are as convenient as Sweep-IT S2. As opposed to almost every other cleaning solution, which requires you to clean your records while they’re not playing; Sweep-IT S2 cleans in real time, just before the groove reaches the cartridge. Position Sweep-IT S2 on your turntable and make sure that the brush is placed in front of the needle when the record starts. Simple as that. Key Features: Gently cleans your vinyl while playing Heavy weight stand for secure standing Easy setup Brush made of natural hair Durable materials Elegant looks Uni-pivot design Follows the record grooves 67mm clearance required
System MKII Record Washing Kit
Anyone who has used the conventional brush-type record cleaner knows how awkward they are to use and that they have only a limited ability. The Spin-Clean® Record Washer System Mk II addresses the issue in a completely different way, enabling users to clean both sides of their records at once, without using the turntable as a cleaning platform. With a Spin-Clean® record washing system, you're able to help preserve your precious turntable, stylus, and of course your record collection.
The Solution Contact Treatment Fluid
The Solution has been developed for audio applications. It cleans, lubricates and protects contacts with time stable results and sound improvement (Van Den Hul apply it to all their interconnects before packing).
VC-E MkII 7" Records Cleaning Set
A dedicated clamp and vacuum arm, along with cleaning fluid is perfect for reconditioning your 7” classics designed for use with the VC-E machine. Note that this arm and kit is NOT compatible with the newer VC-E2 model of vinyl cleaner. The standard screw record clamp and vacuum arm on the VC-E Alu cleaning machines are designed for 12 inch records only, this specially designed 7” kit allows you to attach 7” singles. This Pro-Ject kit contains a record clamp to fit your 7” record, a vacuum arm to brush/wash the record and 100ml of cleaning fluid.
VC-E2 7" Records Cleaning Set
A dedicated clamp and vacuum arm, along with cleaning fluid is perfect for reconditioning your 7” classics designed for the VC-E2 cleaning machine. The standard record clamp and vacuum arm on the VC-E2 cleaning machine are designed for 12 inch records only, this specially designed 7” kit allows you to attach 7” singles. The Pro-Ject 7” VC-E2 kit contains a record clamp to fit your 7” record, a vacuum arm to brush/wash the record and 100ml of cleaning fluid.
Replacement brush for the Pro-Ject VC-S. This brush is made from strands of goat hair, and helps to spread the Wash-IT solution evenly across the record without getting absorbed into the bristles. Please Note: For use on the VC-S, VC-S MK2, VC-S2 and VC-E.
VC-S Self Adhesive Strips for 7" Kit - Grey
Replacement self-adhesive strip for the Pro-Ject VC-S vacuum arm. This strip serves as a soft buffer between the metal vacuum arm and your vinyl records, and should be replaced regularly to ensure record protection. This is designed for the VC-S MK II, but compatible with all models (thicker).
VC-S Self-Adhesive Strip - Black
Replacement self adhesive strips for the Pro-Ject VC-S vacuum arm. These strips create a soft buffer between the metal vacuum arm and the vinyl record. These strips should be replaced at regular intervals, in order to protect your records. Please Note Available options: VC-S3, VC-S2 ALU or VC-E VC-S & VC-S MK II (End Caps included)
VC-S Self-Adhesive Strip - Grey
Replacement self adhesive strip (quanity of one single strip, as you no longer need two due to design changes) for the Pro-Ject VC-S vacuum arm. This strip creates a soft buffer between the metal vacuum arm and the vinyl record. This strip should be replaced at regular intervals, in order to protect your records. The Grey Strip - for VC-S MK II, but compatible with all models (thicker)
Pro-Ject’s RCM range is designed to motivate more and more people to buy both new and used records, expanding collections around the world. A good vacuum cleaner is a proven essential tool for not just record preservation, but also for maximum fidelity and enjoyment of your analogue music. Key Features: NEW improved cabinet design NEW magnetic clamp for quicker cleaning NEW vacuum motor with aluminium mounting pads and cataphoretic surface treatment NEW self-adhesive arm strip for better cleaning NEW Wash it 2 cleaning fluid 5 mm aluminium composite panels Superfast & superstrong cleaning Big 2,5l tank for vacuumed cleaning liquid Completely dry record within 2 rotations Removes static load of vinyl records Removes cleaning fluid (Wash it) residue free Eco-friendly non-alcoholic cleaning fluid High-end build-quality Made in Europe
Okki Nokki felt record cleaning brush.
Wash-IT 2 Record Cleaning Fluid
The next generation Wash it 2 cleaning formula was developed exclusively by Pro-Ject Audio Systems for use with the VC-S and VC-E series record cleaning machine models. Key Features: NEW ready-to-use mixture NEW demineralised water mixed with cleaning concentrate in optimum ratio NEW ensures maximum lifetime of vacuum motors NEW optimised cleaning fluid for Pro-Ject vacuum cleaners Suitable for vinyl & shellac records Outstanding cleaning performance Dissolves a wide range of impurities including fat & grease Evaporates quickly and leaves zero residues Optimum application temperature 20-40 °C Optimum storage temperature 10-25 °C Eco-friendly - Non-toxic - Non-flammable - Alcohol-free Available in 250, 500 and 1000 ml bottles
Replacement washer fluid for the Spin Clean Record Washing System MK II. This cleaning fluid is a unique formula that lifts dirt and keeps your records safe and sparkling. At great value for money, the 4oz. bottle (supplied when you first buy the Washing System) alone will clean up to 700 records! Replacement bottles are available in 16oz. and 32oz. containers, making them a great and lasting investment. Please Note: The fluid used in the Record Washer System does not contain alcohol, so it is fine to be used with 78RPM records.