Michell Gyro Turntable

Please Note: Turntable does not include tonearm or cartridge. The Michell Gyro has been in continuous development since its introduction in the early 1980s. Its journey has been defined by meticulous, incremental refinements, always aimed at maximising performance while strictly adhering to the original design ethos. This commitment has made its aesthetic iconic and its sonic quality legendary within high-end analogue playback. This latest model represents the most dramatic step in that evolution. It is not a reinvention, but a comprehensive engineering overhaul that reimagines the internal architecture. This ground-up approach delivers significant leaps in performance, operational ease, and long-term reliability. The signature Gyro look remains, yet a closer examination and critical listening will confirm the scale of this truly new machine. Key Features: Solid 19mm aerospace-grade aluminium chassis with integrated brass counterweights AI-modelled vibration control and structural optimisation Precision tonearm coupling replaces Delrin spacers Re-tuned suspension with 3.5Hz frequency and EquilibriaTM lateral damping Aluminium baseplate replaces acrylic Spider frame Large SorbothaneTM isolation feet Smoother platter edge – belt groove removed for sleeker aesthetics Motor pod and PSU redesigned with shielding, grounding, and electronic speed control Inverted bearing now features double-helix oil pumping for 2× lubrication flow

Michell Revolv Turntable

Please Note: Turntable does not include tonearm or cartridge.Perfectly situated between our minimalist TecnoDec and the flagship Gyro, the Revolv embodies the precision, clarity, and enduring quality synonymous with the Michell brand. It provides this exceptional audio performance in a streamlined, user-friendly format that is highly rewarding. Built on a precision-machined aluminum chassis, the Revolv integrates advanced technologies honed through our engineering expertise. Its design features a Delrin® platter with peripheral brass mass for stability, a grounded and shielded motor pod for electrical isolation, and Sorbothane™-dampening feet to nullify vibration. The result is a deck that retrieves tone, timing, and texture with remarkable accuracy and depth. Key Features: Solid 19mm aerospace-grade aluminium tooling plate chassis Unsuspended design for direct mechanical grounding Rigid tonearm coupling via precision-machined aluminium arm plate Advanced SorbothaneTM isolation feet with six damping nodes Inverted mono-helix oil-circulating main bearing Shielded motor pod and PSU with electronic speed selection Delrin® platter with 10mm peripheral brass weights for increased inertia Designed, engineered, and assembled by hand in the UK

Michell GyroDec Suspension Springs and Adjuster Kit

Upgrade kit for original specification GyroDecs with single-piece steel suspension pillars, This kit now includes rubber-coated suspension springs. This upgrade simplifies adjusting the chassis height and spring position, enabling you to perfectly set up your turntable. With the turntable now effectively supported on three pin points, performance is also enhanced. Unlike the original design, the suspension pillar consists of three parts: a suspension spindle, thrust ball, and hollow pillar. The spindle is fixed to the base of the turntable, with the thrust ball at its top. The hollow pillar encases this assembly and supports the spring, which in turn holds the chassis. This configuration provides a three-position, high-pressure, point contact suspension system, minimising structural vibrations from reaching the sensitive components of the turntable.

Michell Record Clamp

Michell record clamp for use on GyroDec, TecnoDec, or third-party turntables.   Available with a black or silver knob.

Michell R Record Clamp

Michell 'R' record clamp for use on Rega and similar third party turntables with short centre spindles. Available with a black or silver knob.

Michell Orbe Clamp Kit

To bring all of the added benefit of the Orbe screw-down record clamp to GyroDec and Gyro SE owners, the Orbe Clamp Kit contains a new, threaded record spindle that can be easily retro-fitted to the main bearing body.

Michell TecnoDec Turntable

Please Note: Turntable does not include tonearm or cartridge. Supplied with a Rega profile armplate. The TecnoDec is Michell's entry-level turntable, and shares many features developed for its bigger sibling, the GyroDec, such as the vibration dampening, impedance-matched platter, inverted oil circulating main bearing and a free-standing motor unit. Key Features: Pure Sorbothane feet inserts. Impedance-matched platter. Free standing motor unit. Inverted oil circulating main bearing.

Michell Silicone Well Fluid

For refilling the well on the Hydraulic Reference and Transcripitors turntables and for fluid damped tonearms such as SME V etc.

Michell Synthetic Turntable Bearing Oil

Michell use a proprietary synthetic oil to lubricate the main bearing in all their turntables. The oil has to be a precise viscosity to enable the inverted bearings to circulate the oil correctly.

Michell UniCover Dust Cover

The UniCover is a great solution for people who have an open style turntable with no hinged lid and want to keep the essential parts of their turntable dust free. Please Note: This is also compatible with the TecnoDec and SE model turntables.

Michell Hydraulic Reference Drive Belt

Please Note: This will only fit the Hydraulic Reference turntable. All Michell turntable drive belts are made of a proprietary rubber compound, designed to keep your vinyl revolving at precisely the correct speed, while also minimising any vibration transfer from the motor to the turntable.

Michell SEcure Cover Dust Cover

Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust.

Michell Drive Belt

Please Note: This is for all Michell turntable models except the Reference Hydraulic. All Michell turntable drive belts are made of a proprietary rubber compound, designed to keep your vinyl revolving at precisely the correct speed, while also minimising any vibration transfer from the motor to the turntable.

Michell Orbe Platter Kit

The Orbe Platter Kit offers owners of GyroDecs and Gyro SE’s the opportunity to take their turntables to the next performance level.

Michell GyroDec/Orbe Arm Plate Decoupling Kit

Available to original GyroDec / Orbe owners whose turntable has the arm plate attached using long screws and straight through spacers.   The new assembly isolates the arm plate from the chassis of the turntable using a redesigned arm plate spacer.

Michell Gyro Bearing

Please Note: This is not compatible with an original aluminium GyroDec platter, please upgrade to the impedance matched platter. Contrary to traditional designs, Michell's current main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows them to fully lubricate the inside of the entire bearing while the platter is turning.