Michell Standard Gyro Arm Plate

Michell can supply a range of arm plates for use on their turntables. Standard patterns include Rega, SME, Linn, Hadcock and Graham.

Michell VTA Adjuster 3

Please Note: This is compatible with Rega tonearms using the redesigned three point fixing base such as the RB220, RB330. The Michell VTA adjuster 3 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell VTA Adjuster 2

Please Note: This is compatible with Rega tonearms and derivatives using the original three point fixing base such as the RB202, RB303. The Michell VTA adjuster 2 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Rega Three Point Tonearm 2mm VTA Spacer

A 2mm stainless spacer, laser cut from 2mm stainless steel or anodised black aluminium. Fits all Rega three point tonearms including the 2016 range of Planar turntables. This spacer replaces the previous plastic spacer and offers better performance and support for the tonearm. Please Note: Rega turntables spacers should not be necessary unless you are you using an exceptionally deep bodied cartridge from another manufacturer.

Michell Locknut and VTA Adjuster Pack

Twin pack consisting of: Finger Locking nut (to suit Rega arms) A Vertical Tracking Angle adjustment sleeve for the Rega RB-250, RB-300 and RB-600 arms, to be used with the new-style Rega arm board Michell have been making since the beginning of 1999.  If used with other turntable brands, slight enlargement of the original Rega mounting hole will be necessary to accommodate the increased diameter of the VTA sleeve.

Michell Finger Locking Nut

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base such as the RB250, RB300.

Rega Three Point Tonearm Plastic VTA Spacer

All in one 2mm, 4mm, 6mm and 8mm height adjustment spacer for Rega three point tonearms. When Rega arms are fitted to turntables from other manufacturers it may be necessary to add our "Rega arm spacers" to achieve the correct arm height.

Michell VTA Adjuster 1

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base, such as the RB250, RB300. The Michell VTA adjuster 1 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell TecnoWeight

The TecnoWeight is a great upgrade for anyone with a compatible Rega tonearm. This easy to fit counter weight system is made from heavy stainless steel and aluminium.    Please Note: This is compatible with all Rega tonearms and derivatives, except RB100 series tonearms.

Rega Single Point Tonearm 2mm VTA Spacer

Arm Height Adjustment spacer for RB250 and RB300 - size 2mm.   When Rega arms are fitted to turntables from other manufacturers it may be necessary to add Rega arm spacers to achieve the correct arm height.   Circular spacers are available for the RB250 and RB300 in thickness' of 2mm. An arm 'Sleeve nut' is also available for circumstances where the arm base does not protrude below the arm mounting board.   Please Note: Turntable spacers are not necessary on all Rega turntables.