Michell Gyro Turntable

Please Note: Turntable does not include tonearm or cartridge. The Michell Gyro has been in continuous development since its introduction in the early 1980s. Its journey has been defined by meticulous, incremental refinements, always aimed at maximising performance while strictly adhering to the original design ethos. This commitment has made its aesthetic iconic and its sonic quality legendary within high-end analogue playback. This latest model represents the most dramatic step in that evolution. It is not a reinvention, but a comprehensive engineering overhaul that reimagines the internal architecture. This ground-up approach delivers significant leaps in performance, operational ease, and long-term reliability. The signature Gyro look remains, yet a closer examination and critical listening will confirm the scale of this truly new machine. Key Features: Solid 19mm aerospace-grade aluminium chassis with integrated brass counterweights AI-modelled vibration control and structural optimisation Precision tonearm coupling replaces Delrin spacers Re-tuned suspension with 3.5Hz frequency and EquilibriaTM lateral damping Aluminium baseplate replaces acrylic Spider frame Large SorbothaneTM isolation feet Smoother platter edge – belt groove removed for sleeker aesthetics Motor pod and PSU redesigned with shielding, grounding, and electronic speed control Inverted bearing now features double-helix oil pumping for 2× lubrication flow

Michell Revolv Turntable

Please Note: Turntable does not include tonearm or cartridge.Perfectly situated between our minimalist TecnoDec and the flagship Gyro, the Revolv embodies the precision, clarity, and enduring quality synonymous with the Michell brand. It provides this exceptional audio performance in a streamlined, user-friendly format that is highly rewarding. Built on a precision-machined aluminum chassis, the Revolv integrates advanced technologies honed through our engineering expertise. Its design features a Delrin® platter with peripheral brass mass for stability, a grounded and shielded motor pod for electrical isolation, and Sorbothane™-dampening feet to nullify vibration. The result is a deck that retrieves tone, timing, and texture with remarkable accuracy and depth. Key Features: Solid 19mm aerospace-grade aluminium tooling plate chassis Unsuspended design for direct mechanical grounding Rigid tonearm coupling via precision-machined aluminium arm plate Advanced SorbothaneTM isolation feet with six damping nodes Inverted mono-helix oil-circulating main bearing Shielded motor pod and PSU with electronic speed selection Delrin® platter with 10mm peripheral brass weights for increased inertia Designed, engineered, and assembled by hand in the UK

Michell Cusis E/H Moving Coil Cartridge

The Cusis E/H is the high-output version of our highly praised Cusis E cartridge, now making it compatible with MM phono stages. As the gateway to our moving coil cartridge range, this exceptional cartridge delivers remarkable detail and musicality, always enhancing the music without overshadowing it.

Michell Apollo Phono Stage

For discerning audiophiles, the true allure of vinyl lies in the richness and warmth of analogue sound. To fully appreciate every detail and nuance, the right equipment is essential. While a premium turntable, tonearm, and cartridge are vital, the quality of your phono stage is what ensures the integrity of the music.  Crafted in the UK and meticulously designed by the Michell Audio team, the Apollo incorporates cutting-edge technology to deliver outstanding audio performance with any turntable and cartridge. This two-box design is engineered to minimise unwanted RF noise, as such interference is the most damaging external factor to the delicate circuits of a phono stage, ensuring pristine audio reproduction. Key Features: The inbuilt power supply circuitry works in harmony with the MUSE power supply to further refine and regulate the DC power High-Quality class A preamplifiers ensure precise signal handling Passive RIAA Circuit Class A Gain Stages Customisable loading and gain settings. MUSE uses a high-quality low noise toroidal transformer, advanced capacitance multiplier technology and very high-quality voltage regulators, to reduce ripple and noise, delivering two highly filtered and regulated DC outputs. Dual Filtration: It works in harmony with APOLLO's internal power supply for superior filtering and regulation. Noise Isolation: By housing the transformer separately in MUSE, any noise generation is isolated from the amplification circuits.

Michell LEVIS Magnetic Levitation Feet

LEVIS feet use opposing magnets to support your turntable, allowing it to float on a cushion of air. This innovative design adds an extra layer of structural isolation between your turntable's sensitive components and the surface it rests on. Structural vibrations can be caused by dynamic forces from loudspeakers, foot traffic, nearby traffic, electrical transformers, and even turntable motors. Even the smallest vibrations can transfer to your turntable and impact its performance. LEVIS feet effectively eliminate these vibrations before they become an issue. When designing a magnetic levitation device, it's crucial to control the levitation mechanism and ensure the assembly remains intact. After exploring existing solutions, we decided on a fully enclosed design with minimal contact points. In operation, each foot features only three tiny, unloaded contact points—almost pinpoints—made from high-rigidity, low-mass polymer. These contact points do not bear weight and are isolated from the metal components by a polymer housing and spring. Their sole purpose is to prevent metal parts from touching, resulting in an exceptionally low level of contact and maximising contact-free support. LEVIS feet are sold in sets of three and come in two weight ranges: LEVIS (for full-size turntables with hinged lids, 13kg-30kg) LEVIS SE (for SE model turntables, 9.5kg-14kg)

Michell GyroDec Suspension Springs and Adjuster Kit

Upgrade kit for original specification GyroDecs with single-piece steel suspension pillars, This kit now includes rubber-coated suspension springs. This upgrade simplifies adjusting the chassis height and spring position, enabling you to perfectly set up your turntable. With the turntable now effectively supported on three pin points, performance is also enhanced. Unlike the original design, the suspension pillar consists of three parts: a suspension spindle, thrust ball, and hollow pillar. The spindle is fixed to the base of the turntable, with the thrust ball at its top. The hollow pillar encases this assembly and supports the spring, which in turn holds the chassis. This configuration provides a three-position, high-pressure, point contact suspension system, minimising structural vibrations from reaching the sensitive components of the turntable.

Michell Coated Suspension Springs

Rubber-coated suspension springs bring a significant upgrade to all pre-2021 GyroDec / Gyro SE / Orbe / Orbe SE Turntables. By damping the spring's natural ability to resonate when exposed to airborne vibrations, the rubber coating prevents the music playing in the room from feeding vibrations back into the turntable. This small innovation gives a significant increase in performance. Bass response is tightened, and instruments and vocals are more defined within the sound stage.

Michell Cusis M Moving Coil Cartridge

The Cusis M offers the audiophile an ultra high-end listening experience at a cost which belies its ability. It's quite simply one of the most accurate and musical moving coil cartridges available at any price. All of Michell's Cusis cartridges share the same moving coil design. At the heart of the cartridge is a samarium-cobalt magnet which is combined with pure iron to create a very stable magnetic field within the cartridge.

Michell Cusis S Moving Coil Cartridge

The Cusis S offers extended frequency response and incredible detail retrieval whilst retaining a level of musicality that is second to none.  All of Michell's Cusis cartridges share the same moving coil design. At the heart of the cartridge is a samarium-cobalt magnet which is combined with pure iron to create a very stable magnetic field within the cartridge.

Michell Cusis E Moving Coil Cartridge

The Cusis E is the entry point of Michell's moving coil cartridge range, giving great detail and musicality, and never detracting from the music. All of Michell's Cusis cartridges share the same moving coil design. At the heart of the cartridge is a samarium-cobalt magnet which is combined with pure iron to create a very stable magnetic field within the cartridge.

Michell Record Clamp

Michell record clamp for use on GyroDec, TecnoDec, or third-party turntables.   Available with a black or silver knob.

Michell R Record Clamp

Michell 'R' record clamp for use on Rega and similar third party turntables with short centre spindles. Available with a black or silver knob.

Michell Standard Gyro Arm Plate

Michell can supply a range of arm plates for use on their turntables. Standard patterns include Rega, SME, Linn, Hadcock and Graham.

Michell Orbe Clamp Kit

To bring all of the added benefit of the Orbe screw-down record clamp to GyroDec and Gyro SE owners, the Orbe Clamp Kit contains a new, threaded record spindle that can be easily retro-fitted to the main bearing body.

Michell VTA Adjuster 3

Please Note: This is compatible with Rega tonearms using the redesigned three point fixing base such as the RB220, RB330. The Michell VTA adjuster 3 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell VTA Adjuster 2

Please Note: This is compatible with Rega tonearms and derivatives using the original three point fixing base such as the RB202, RB303. The Michell VTA adjuster 2 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell TecnoArm 2 Tonearm

The TecnoArm 2 is designed to offer a truly audiophile listening experience at exceptional value for money and easily competes with tonearms at three times the price.

Michell TecnoDec Turntable

Please Note: Turntable does not include tonearm or cartridge. Supplied with a Rega profile armplate. The TecnoDec is Michell's entry-level turntable, and shares many features developed for its bigger sibling, the GyroDec, such as the vibration dampening, impedance-matched platter, inverted oil circulating main bearing and a free-standing motor unit. Key Features: Pure Sorbothane feet inserts. Impedance-matched platter. Free standing motor unit. Inverted oil circulating main bearing.

Michell Iso Base

Compatible with the Orbe SE, Gyro SE and TecnoDec the Iso Base is the ideal platform to place your Michell Engineering turntable.   Its inert material characteristic combined with the tenderfeet give it the extra isolation that is necessary for the very best performance from your deck.

Michell Locknut and VTA Adjuster Pack

Twin pack consisting of: Finger Locking nut (to suit Rega arms) A Vertical Tracking Angle adjustment sleeve for the Rega RB-250, RB-300 and RB-600 arms, to be used with the new-style Rega arm board Michell have been making since the beginning of 1999.  If used with other turntable brands, slight enlargement of the original Rega mounting hole will be necessary to accommodate the increased diameter of the VTA sleeve.

Michell Cartridge Tags

Michell think that these are the ultimate cartridge tags and they come as standard on their TecnoArm 2.

Michell Silicone Well Fluid

For refilling the well on the Hydraulic Reference and Transcripitors turntables and for fluid damped tonearms such as SME V etc.

Michell Synthetic Turntable Bearing Oil

Michell use a proprietary synthetic oil to lubricate the main bearing in all their turntables. The oil has to be a precise viscosity to enable the inverted bearings to circulate the oil correctly.

Michell Finger Locking Nut

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base such as the RB250, RB300.

Michell UniCover Dust Cover

The UniCover is a great solution for people who have an open style turntable with no hinged lid and want to keep the essential parts of their turntable dust free. Please Note: This is also compatible with the TecnoDec and SE model turntables.

Michell VTA Adjuster 1

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base, such as the RB250, RB300. The Michell VTA adjuster 1 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell Tenderfeet Large - Pack of 3

Please Note: This listing is for a pack of 3. Made from anodised aluminium, tender feet can be used under any item of audio equipment, to help isolate that item from structural vibrations. Improving the overall audio performance.

Michell Hydraulic Reference Drive Belt

Please Note: This will only fit the Hydraulic Reference turntable. All Michell turntable drive belts are made of a proprietary rubber compound, designed to keep your vinyl revolving at precisely the correct speed, while also minimising any vibration transfer from the motor to the turntable.

Michell TecnoWeight

The TecnoWeight is a great upgrade for anyone with a compatible Rega tonearm. This easy to fit counter weight system is made from heavy stainless steel and aluminium.    Please Note: This is compatible with all Rega tonearms and derivatives, except RB100 series tonearms.

Michell SEcure Cover Dust Cover

Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust.

Michell Drive Belt

Please Note: This is for all Michell turntable models except the Reference Hydraulic. All Michell turntable drive belts are made of a proprietary rubber compound, designed to keep your vinyl revolving at precisely the correct speed, while also minimising any vibration transfer from the motor to the turntable.

Michell Orbe Platter Kit

The Orbe Platter Kit offers owners of GyroDecs and Gyro SE’s the opportunity to take their turntables to the next performance level.

Michell GyroDec/Orbe Arm Plate Decoupling Kit

Available to original GyroDec / Orbe owners whose turntable has the arm plate attached using long screws and straight through spacers.   The new assembly isolates the arm plate from the chassis of the turntable using a redesigned arm plate spacer.

Michell Gyro Bearing

Please Note: This is not compatible with an original aluminium GyroDec platter, please upgrade to the impedance matched platter. Contrary to traditional designs, Michell's current main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows them to fully lubricate the inside of the entire bearing while the platter is turning.