SPL Crossover Mk2

The SPL Crossover Mk2 is a premium, fully analog active crossover engineered to seamlessly integrate subwoofers or bass loudspeakers into high-end audio setups without converting signals to digital. Powered by SPL's proprietary 120V VOLTAiR technology, the Mk2 features expanded frequency control, switchable 12 dB/24 dB roll-off slopes, continuous 360° phase alignment, and versatile gold-plated XLR/RCA connectivity. Available in Black, Red, or Silver, it offers audiophiles ultimate flexibility and uncompromising analog sound quality. Key Features Proprietary VOLTAiR 120V Technology: Operates at a +/-60V DC rail—four times that of standard op-amps—delivering massive dynamic range, high headroom, and rich detail. Pure Analog Signal Path: Avoids digital conversion steps in high-end analog signal chains. Flexible Crossover Frequencies: 18 selectable crossover points per section ranging from 20 Hz to 3.6 kHz across three frequency bands. Selectable Roll-Off Slopes: Switch between 12 dB or 24 dB per octave slopes independently for High Pass and Low Pass filters. Variable 360° Phase Control: Full analog variable phase alignment (0° to 180° and 0° to -180°) to sync subwoofers with main speakers, with a complete bypass (OFF) mode. Integrated Low Cut Filter: 20 Hz sub-harmonic filter relieves amplifiers and speakers of inefficient, inaudible ultra-low frequencies. Universal Connectivity: Gold-plated XLR and RCA stereo inputs and outputs, with output signals available on both formats simultaneously. Mono/Stereo Low Output: Run single or dual active subwoofers with a flip of a switch. 12V Triggering (AMP CTL): Smart power sequencing for up to four downstream amplifiers or components.

PMC P1 Speaker Stands

Tailor-made for the PMC Prodigy1 and Prophecy1, the P1 speaker stands combine precision engineering with high-mass stability. Standing at an optimal 600mm height, these heavy-duty steel stands feature twin columns and a constrained-layer damping top plate lined with viscoelastic polymer to eliminate unwanted resonances. The result? Sharper imaging, richer low-level detail, and significantly tighter bass response. Each stand includes four isolation pads for a secure grip, adjustable M8 floor spikes for precise levelling, and fillable columns so you can fine-tune the mass to your room’s acoustics. Key Features: Precision-Tuned: Designed specifically for PMC Prodigy1 & Prophecy1 at an ideal 600mm height Advanced Damping: Constrained-layer top plate absorbs energy before it distorts your sound Customisable Mass: Fillable twin columns let you adjust weight to suit your room Rock-Solid Base: Heavy 4mm steel base plate with adjustable M8 spikes and protective isolation pads Dimensions: (H)634.50 x (W)220 x (D)270mm  *Speakers not included.

Sonus Faber Olympica G3 I Stand

Crafted from aluminum with stainless steel spikes for stability, the Olympica Stands are engineered to elevate the performance and elegance of the Olympica I bookshelf speakers, delivering precise vibration isolation alongside refined, sculptural aesthetics. Stands and speakers sold separately.

Sonus Faber Olympica V G3 Floorstanding Speakers

Tall, elegant, and steeped in Italian craftsmanship, the Sonus faber Olympica V is a masterclass in combining high-end acoustics with luxurious furniture design. Rather than hiding inside a generic box, the Sonus faber Olympica V uses an asymmetrical, lute-shaped cabinet to minimize internal resonance and preserve the purity of the sound. Crafted from hand-finished Walnut or Wenge wood and sandblasted matte grey aluminum, it brings a sculptural, refined presence to any room. Beneath its elegant exterior, a three-way ported design pairs three dedicated woofers with detailed mid-high drivers to deliver a warm, enchanting sound with powerful, controlled bass. Whether viewed as an exquisite piece of Italian home decor or as a reference-grade audio system, the Olympica V surrounds the senses with pure physical and sonic beauty. Key Features: 3 way front vented box Tweeter: 1 x 1.1" silk Damped Apex Dome Midrange: 1 x 6.5" Camelia Woofer: 3 x 6.5" 37 Hz – 40000 Hz Frequency Response Protective grille included

Sonus Faber Olympica III G3 Floorstanding Speakers

Slim, statuesque, and deeply rooted in Italian craftsmanship, the Sonus faber Olympica III (also referred to in its third-generation updates as the Olympica Nova III) is a masterclass in combining high-end acoustics with luxurious furniture design. Rather than hiding inside a generic box, the Sonus faber Olympica III uses a structural, organic shape to eliminate internal echoes. Crafted from hand-selected Walnut or Wengè wood, solid aluminum, and fine leather, it brings a dramatic, sculptural presence to any room. Beneath its elegant exterior, an immersive three-way design pairs custom woofers with a sealed cork midrange enclosure to deliver striking acoustic transparency. With a wide 42 Hz to 40,000 Hz frequency response and a highly sensitive 90 dB SPL rating, it effortlessly reproduces deep bass and nuanced highs to fill large spaces. Whether viewed as an exquisite piece of Italian home decor or as a reference-grade audio system, the Olympica III surrounds the senses with pure physical and sonic beauty. Key Features: 3 way front vented box Tweeter: 1 x 1.1" silk Damped Apex Dome Midrange: 1 x 6.5" Camelia Woofer: 2 x 6.5" 42 Hz – 40000 Hz Frequency Response Protective grille included

Ruark Talisman-R Floorstanding Speakers

Please note: Pre-Order Now for October Delivery. The original Ruark Talisman was launched in 1990, and they did something most speakers never managed: they made people fall in love with how a speaker looked before they’d even heard them play. That slim silhouette, that sloped baffle, Talisman felt like they belonged in a home. Talisman-R carries this legacy into the now. The connection between the original and new is clear, but with years of accumulated knowledge, Talisman-R incorporates innovations that bring a new level of performance along with a design that marries perfectly with Ruark's 100 Series aesthetic. Key Features: Reference floor-standing design New decoupled baffle system Tuned bass reflex design with dual flared port Ruark 27mm silk dome tweeter Ruark 17cm/6.5" NS+ long throw woofer

Sonus Faber Olympica I G3 Standmount Speakers

Distilling the essence of legendary Italian craftsmanship into a refined bookshelf design, the Olympica I brings the unmistakable character of Sonus faber sound to your intimate listening spaces. Small in footprint but rich in presence, these speakers deliver every musical nuance with striking clarity, perfect balance, and profound emotional depth. Crafted under the philosophy of Materia e Forma (Matter and Form), the Olympica I is a sculptural masterpiece where natural aesthetics and acoustic performance exist in perfect harmony. Handcrafted walnut wood minimises internal resonance, while precision-engineered solid aluminium details provide structural rigidity. The design is completed with hand-applied luxury leather accents that embody classic Italian elegance. Key Features: 2 way front vented box Tweeter: 1 x 1.1", DAD™ Arrow Point extended frequency silk tweeter Midwoofer: 1 x 6.5" mm, Paper cone - Copper cap 57 Hz – 40000 Hz Frequency Response Protective grille included Optional matching Olympica I G3 speaker stands available

Eversolo SE100 Standmount Speakers

The SE100 is a striking desktop loudspeaker that breaks geometric design norms to deliver a modern statement of visual balance and structural harmony. Built with an audiophile-grade, precision-engineered two-way architecture, it features strictly calibrated phase and time alignment across a meticulously fine-tuned crossover to produce a natural, coherent, and highly focused soundstage. At its acoustic heart, a 25mm premium silk dome tweeter driven by a high-flux neodymium motor delivers transparent, airy highs, while a bespoke 5.25" paper-pulp cone mid-bass driver renders vocals with lifelike warmth and extends smoothly down to 50Hz. Powered by a high-purity oxygen-free copper voice coil (the RTC Engine), the SE100 transitions from subtle nuances to explosive peaks in milliseconds. Meticulously voiced by a lead acoustic team to achieve a flat, high-resolution frequency response, the SE100 captures every sonic detail with an authentic signature that is warm, natural, and vibrantly alive. Key Features: Blackedge Core Two-Way Architecture 25mm Premium Silk Dome Rapid Transient Coil 5.25" Paper-pulp Cone Holographic Soundstage Acoustically Invisible Grille

Wharfedale Denton 1S Standmount Speakers

The new Wharfedale DENTON 1S masterfully advances the brand’s Heritage legacy. True to its roots, this compact powerhouse punches far above its weight, delivering a rich and deeply engaging soundstage. While the 80th and 85th anniversary models successfully revived classic design cues, the 1S evolves the formula even further—seamlessly blending timeless aesthetics with cutting-edge acoustic engineering for modern living spaces. Once again, Wharfedale proves that legendary heritage is constantly evolving. Key Features: 2-way Standmount / Wallmount speaker with Bass Reflex enclosure 50Hz - 20kHz Frequency response “Brilliance” EQ switch provides subtle tonal adjustment to optimise performance for free-space, shelf-mounted, or near-wall positioning 3 Year Warranty

WiiM Sound Lite Streaming Speaker Twin Pack

The Sound Lite is the easiest way into the WiiM streaming environment, as it's a full-featured speaker offering great sound at a truly exceptional price. It's now even more appealing with the introduction of the Sound Lite Twin Pack, with a twin pack you can pair them together to create a dedicated left/right stereo pair. WiiMs smart speaker with Hi-Res audio (24-bit/192 kHz), 100W peak power, and AI RoomFit™ correction. Instantly stream music from 20+ services including Spotify Connect, TIDAL Connect and Qobuz Connect. Use it solo, in stereo, or as part of your whole-home audio setup. Key Features: Spotify Connect, Qobuz Connect, Tidal Connect Google Cast Internet Radio Hi‑Res 24‑bit/192 kHz with gapless playback Built-in RoomFit™ technology Multi-room playback compatible WiiM Voice Remote 2 Lite compatible

DALI SONIK 9 Floorstanding Speakers

The SONIK 9 stands as the flagship powerhouse of the series, engineered to command even the largest rooms with breathtaking scale and effortless authority. It delivers a deeply physical audio experience, combining high-impact, dynamic bass with the crystalline detail of a Hybrid Tweeter that reveals every nuance across a wide listening area. Whether anchoring a high-end stereo system or serving as the muscle for a premium home theater, the SONIK 9 adapts seamlessly to any setup, bringing music and movies to life with unrivaled presence and cinematic depth. Key Features: 17 x 45 mm planar magnetostatic tweeter, 1 x 29 mm low loss soft dome 3 x 7-inch Low/Mid Frequency Drivers Grilles included Available in 4 colours (Natural Oak, White, Black Ash & Walnut)

DALI SONIK 7 Floorstanding Speakers

The SONIK 7 delivers elite performance for medium to large spaces. Armed with dual 7-inch SMC™ Clarity Cone™ woofers and a Hybrid Tweeter, it produces deep bass, articulate mids, and shimmering highs. It is the definitive choice for natural, lifelike sound in any music or cinema setup. Key Features: 17 x 45 mm planar magnetostatic tweeter, 1 x 29 mm low loss soft dome 2 x 7-inch Low/Mid Frequency Drivers Compact Size  (1006 × 200 × 330 mm) Grilles included Available in 4 colours (Natural Oak, White, Black Ash & Walnut)

DALI SONIK 5 Floorstanding Speakers

Experience audiophile-grade performance in a silhouette that respects your space. The SONIK 5 marries an architectural design with a powerhouse of innovation, featuring dual 5¼-inch SMC™ and Clarity Cone™ woofers paired with a high-definition 29mm tweeter. From thunderous lows to shimmering highs, it transforms your living room into a world-class soundstage. High-fidelity sound now fills the room instead of the floor space, delivering a masterclass in clarity that captures every nuance of a recording. This refined floorstander offers a visceral punch of deep, controlled bass while maintaining a design that achieves perfect aesthetic harmony in any modern interior. Key Features: 1 x 29mm ultra-light soft dome tweeter 2 x 2 x 5¼ inch Low/Mid Frequency Drivers Compact Size  (826 x 162 x 270 mm) Grilles included Available in 4 colours (Natural Oak, White, Black Ash & Walnut)

DALI SONIK 3 Standmount Speakers

The SONIK 3 bridges the gap between surgical precision and room-filling richness. Combining a 29mm ultra-light soft dome tweeter with a larger 7-inch SMC™ and Clarity Cone™ woofer, it delivers the coherence of a studio monitor with the authoritative bass of a much larger cabinet. Whether placed on a stand, a shelf, or integrated into media furniture, the SONIK 3 provides a high-end, well-timed audio experience that brings your media to life. Key Features: 1 x 29mm ultra-light soft dome tweeter 1 x 7-inch SMC™ and Clarity Cone™ woofer Compact Size  (350 × 200 × 306 mm) Grilles included Available in 4 colours (Natural Oak, White, Black Ash & Walnut)

DALI SONIK 1 Standmount Speakers

The SONIK 1 proves that you don't need a massive footprint to achieve massive sound. By pairing a 29mm ultra-light soft dome tweeter with a 5¼-inch wood fiber SMC™ and Clarity Cone™ woofer, this speaker delivers high-fidelity detail in a remarkably compact form. Whether you're tucking it onto a bookshelf, mounting it on a wall, or placing it on a stand, the SONIK 1 strikes the perfect chord between deep bass performance and space-saving efficiency. Key Features: 1 x 29 mm low loss soft dome High Frequency Driver 1 x 5¼-inch Low/Mid Frequency Driver Compact Size  (283 x 162 x 231mm) Grilles included Available in 4 colours (Natural Oak, White, Black Ash & Walnut)

Scansonic M30.2 Floorstanding Speakers

The ultimate expression of Scandinavian sound. As the flagship of the series, the M30.2 is engineered to deliver an expansive, authoritative performance that fills even the largest listening rooms with ease. At its heart lies a high-output neodymium ribbon tweeter, providing crystalline highs and revealing the most subtle nuances in your recordings.    A dedicated 4" honeycomb midrange driver ensures vocal clarity and lifelike presence, while twin 6.5" woofers provide a potent, high-impact low end. To further refine the performance, dual 5×9" passive radiators extend the bass response down to a staggering 33 Hz, maintaining absolute clarity without port turbulence. Combining technical mastery with understated elegance, the M30.2 is a true 3-way masterpiece designed for the discerning audiophile.    Key Features: Flagship 3-Way Architecture: A dedicated midrange driver allows for superior vocal imaging and a more detailed, layered soundstage. Neodymium Ribbon Tweeter: Utilises a Kapton-based ribbon for ultra-fast response times and transparent, high-resolution treble up to 30 kHz.    Dual 6.5" Honeycomb Woofers: Lightweight yet rigid honeycomb cones provide immense structural integrity for fast, accurate, and distortion-free bass.    Advanced Passive Radiator System: Twin 6x9" rear-facing radiators allow the M30.2 to reach deep-bass frequencies while preserving the timing and "snap" of the music. Premium High-Order Crossover: Featuring high-quality components rarely seen at this price point, ensuring seamless transitions at 600 Hz and 3.5 kHz. Hand-Finished Cabinetry: Standing over a meter tall and weighing 25kg per unit, these speakers offer the mass and stability required for high-fidelity performance.

Scansonic M20.2 Floorstanding Speakers

Elegant stature, effortless scale. The M20.2 is designed for those who demand a commanding, room-filling performance without compromising on refined detail. Featuring a high-precision ribbon tweeter for brilliant high-frequency reproduction, it captures the finest nuances of any musical genre. Powered by dual 5.25″ mid-bass woofers, the M20.2 delivers a seamless blend of crisp midrange and robust low-end authority. Two dual 5×9″ rear-facing passive radiators work in harmony to provide tight, resonant bass depth that remains clear and controlled even at higher volumes. Housed in a timelessly modern cabinet, the M20.2 is a sophisticated statement piece that delivers a powerful, immersive audio experience for any home. Key Features: Precision Ribbon Tweeter: Offers a wide, airy soundstage and captures micro-details for a truly transparent high-frequency experience. Dual 5.25″ Mid-Bass Drivers: Twin woofers provide double the surface area for a more muscular midrange and authoritative, punchy lows. Dual 5×9″ Rear Passive Radiators: Expertly tuned to extend bass response into deeper frequencies while maintaining absolute timing and control. Advanced Cone Materials: High-tech driver construction ensures minimal distortion and a fast, accurate transient response. Optimized Phase Alignment: Premium crossover components are meticulously selected to ensure a cohesive, natural sound across the entire frequency spectrum. Timeless Floorstanding Design: A sleek, modern aesthetic that provides the internal volume necessary for deep-bass performance while taking up a minimal footprint.

Scansonic M15.2 Standmount Speakers

Big sound, Scandinavian style. The M15.2 is a compact powerhouse engineered for smaller rooms without compromising on scale. Featuring a high-performance ribbon tweeter for exquisitely detailed highs and a 6.5" mid-bass woofer, it delivers a punchy, dynamic performance that defies its size. The clever 5×9" rear-mounted passive radiator ensures deep, controlled bass, while premium crossover components maintain flawless sonic cohesion. Whether you’re short on space or simply demand refined aesthetics, the M15.2 elevates your home audio experience with effortless elegance. Key Features: High-Performance Ribbon Tweeter: Delivers exceptionally detailed, airy high frequencies with a level of clarity that traditional dome tweeters can't match. 6.5" Mid-Bass Woofer: A precision-engineered driver that provides a rich, natural midrange and surprisingly punchy low-end response. 5×9" Rear Passive Radiator: Maximises bass extension and depth without the "chuffing" noise often found in small ported speakers. Audiophile-Grade Crossovers: Built with premium components to ensure low distortion and perfect timing across the entire frequency range. Compact Scandinavian Design: A sleek, minimalist aesthetic that fits seamlessly into modern living spaces while offering elite-tier sound. Small-Room Optimised: Specifically voiced to provide a massive soundstage in smaller listening environments or apartment setups.

WiiM Sound Lite Streaming Speaker

WiiM Sound Lite: WiiMs smart speaker with Hi-Res audio (24-bit/192 kHz), 100W peak power, and AI RoomFit™ correction. Instantly stream music from 20+ services including Spotify Connect, TIDAL Connect and Qobuz Connect. Use it solo, in stereo, or as part of your whole-home audio setup. Key Features: Spotify Connect, Qobuz Connect, Tidal Connect Google Cast Internet Radio Hi‑Res 24‑bit/192 kHz with gapless playback Built-in RoomFit™ technology Multi-room playback compatible WiiM Voice Remote 2 Lite compatible

Ruark RS1 Subwoofer

The foundation of all music is the bass. It's the element you feel—the rhythm, the groove, and the palpable emotion that makes your heart quicken and your body move. Regardless of genre, clean and extended bass adds an unparalleled dimension to musical enjoyment. Meet RS1: engineered to deliver exactly that. Key Features: Compatible with Ruark R3S, MR1 and R410 Deep, controlled and musical sound Natural extended bass Elegant design 100 watt Class D amplifier Auto-on/standby feature  

WiiM Sub Pro

Meet the WiiM Sub Pro, the smart audio solution that adapts to you. It features RoomFit auto-calibration, driven by advanced AI, to instantly analyse your room's unique acoustics and precisely tailor the sound for optimal performance. Say goodbye to connectivity worries thanks to next-gen technology that ensures compatibility with virtually any system. Built to last and easy to manage, its sleek, minimalist design ensures it looks great in any living space. It's the ultimate addition to a WiiM ecosystem, but don't stop there—its compelling price point and powerful technology also make it a superb upgrade for any existing hi-fi or home cinema setup, bringing the added benefit of convenient wireless control.

Sonus Faber Olympica Nova I Standmount Speakers - Wenge/Stands - Ex-Demo

Please Note: This is a one time listing for an ex-demonstration unit at a discounted price. Speaker stands included. Enjoy any little details… at their best!   Since 1983, many moments have marked the history of Sonus faber; the launch of the Olympica Collection is one of them. One of the first lines presented as a complete family of products, but above all, the very first one to feature original drivers, entirely designed in Sonus faber.

Martin Logan Motion XT F100 Floorstanding Speakers - Walnut - Ex-Demo

Experience exceptional sound quality with MartinLogan’s Gen2 Folded Motion® XT Tweeter featuring Folded Motion® Waveguide technology seamlessly integrated into an elegant front baffle design. The Nomex®-Reinforced Kevlar® midrange offers improved resonance reduction and clarity, while the triple 6.5” aluminum woofers provide powerful and dynamic bass. Stepping up to the XT series performance upgrades with triple bass drivers makes for a compelling option for those looking for a high-performance tower speaker. The Motion® XT F100 is sure to impress in any audio setup. The most ambitious acoustic and aesthetic development in MartinLogan's 40-year history. Motion® Series defines elegance and performance by leveraging exclusive technologies and decades of experience. The result is a loudspeaker collection that is not just an upgrade of its predecessor, but a whole new level of quality and excellence. MartinLogan speakers are known for their exceptional articulation, detail and realism, regardless of the listening environment. By using advanced thin-film technologies and Controlled Dispersion, MartinLogan delivers a unique and unparalleled listening experience that is not commonly found in other speakers.

Martin Logan Motion XT B100 Standmount Speakers - Satin White - Ex-Demo

Please Note: This is a one time listing for an ex-demonstration unit at a discounted price, please note there maybe cosmetic imperfections.  MartinLogan's best bookshelf speaker, for those wanting maximum performance without moving to a tower speaker. The Gen2 Folded Motion® XT Tweeter and Nomex®-Reinforced Kevlar® woofer deliver exceptional clarity and precision, making B100 ideal for 2-channel or home theater setups. For those desiring a stand mount option, the B100 is threaded to securely attach to their matching STAND25 speaker stand (sold separately) for maximum stability. The most ambitious acoustic and aesthetic development in MartinLogan's 40-year history. Motion® Series defines elegance and performance by leveraging exclusive technologies and decades of experience. The result is a loudspeaker collection that is not just an upgrade of its predecessor, but a whole new level of quality and excellence. MartinLogan speakers are known for their exceptional articulation, detail and realism, regardless of the listening environment. By using advanced thin-film technologies and Controlled Dispersion, MartinLogan delivers a unique and unparalleled listening experience that is not commonly found in other speakers.

WiiM Sound Streaming Speaker

WiiM Sound: The display-first smart speaker with Hi-Res audio (24-bit/192 kHz), 100W peak power, and AI RoomFit™ correction. Instantly control your music via the 1.8″ touchscreen or stream from 20+ services including Spotify Connect, TIDAL Connect and Qobuz Connect. Use it solo, in stereo, or as part of your whole-home audio setup. Key Features: Spotify Connect, Qobuz Connect, Tidal Connect Google Cast Internet Radio Hi‑Res 24‑bit/192 kHz with gapless playback Built-in RoomFit™ technology Multi-room playback compatible WiiM Voice Remote 2 Lite

Dual CS 418 Turntable, Advance Paris X-i50 BT Integrated Amplifier & Scansonic M40 Speakers

Experience the best of analog and digital audio with this complete hi-fi bundle. At the core is the German-engineered Dual CS418 Turntable, featuring a precision aluminum tonearm and a pre-mounted Ortofon 2M Red cartridge for detailed vinyl playback. Powering the system is the versatile Advance Paris X-i50 BT Integrated Amplifier (2 x 50W RMS), which features a high-bias mode for nuanced sound, a built-in MM Phono Stage for the turntable, and integrated Bluetooth for wireless streaming. Finally, the system delivers rich, expansive sound through the elegant Scansonic M40 Floorstanding Speakers, which feature high-resolution ribbon tweeters for clear highs and a four-driver array for powerful bass, ensuring a truly immersive listening experience. Includes 10m of speaker cable so you can set up and start listening right away.

Dual CS 429 Turntable and Advance Paris AIR65 Speakers

Experience the best of analog and modern audio with this perfectly matched Hi-Fi bundle. The Dual CS 429 Fully Automatic Turntable offers pure vinyl pleasure with ultimate convenience—simply press a button and let its precision mechanics, Ortofon 2M Red cartridge, and built-in switchable phono preamp handle the rest. Paired with the powerful Advance Paris AIR 65 Active Bluetooth Speakers, you get a complete, high-fidelity system right out of the box. These 2x55W bookshelf speakers are ready for your turntable thanks to their dedicated Phono (MM) input, and they offer modern versatility with high-quality aptX Bluetooth, Optical, and Coaxial digital inputs for all your streaming and TV audio needs. Dual CS429 The fully automatic function of the CS 429 provides maximum ease of use. The tonearm automatically lifts, shifts across and drops with the push of a button. Simply place the vinyl record on the platter and push the start button. Advance Paris AIR 65 Speakers: The Advance Paris AIR 65 Connected speakers feature integrated Bluetooth, enabling effortless wireless device connections to phones and laptops. For additional fidelity the AIR 65s are also available with the optional WTX-MicroStream which allows for Wi-Fi connectivity for seamless audio streaming. Key Features: 1 x Optical and 1 x Coaxial Digital inputs. 2 x RCA Analog Input, 1 subwoofer output. Turntable ready with Phono MM (Moving Magnet) input. The speakers can be controlled via the included remote control, or if using the optional WTX-MicroStream via the Advance PlayStream app Optional WTX-MicroStream network adapter for WiFi streaming.

Dual CS 418 Black and Advance Paris AIR65 Speakers

Experience high-fidelity vinyl playback with this perfectly matched system. The Dual CS 418 Turntable is a manually operated deck featuring German precision engineering, a switchable built-in phono preamp, and a premium Ortofon 2M Red cartridge for detailed, dynamic sound. This pairs flawlessly with the versatile Advance Paris Air65 Active Bluetooth Speakers. These powerful speakers deliver 2x55W RMS and feature a dedicated MM Phono input, creating a direct, simple connection to the turntable. Enjoy the best of both worlds: audiophile-grade vinyl and modern convenience with Bluetooth aptX streaming—all in one elegant, easy-to-set-up package. Simply unpack, connect, and play. Dual CS 418 Turntable:  The entry-level Dual CS 418 turntable demonstrates the brand's commitment to high component precision by sharing a robust platform with its higher-end models. Its premium build features include a solid, folded MDF plinth with a black vinyl veneer, supported by elastomer vibration absorbers in the feet and a durable, removable dust cover. For superior playback, the CS 418 utilises a low-vibration DC-Servo-Motor with rubber mountings and a precision-cut belt to minimise noise, driving a precise aluminum die-cast platter with a heavy rubber mat for optimal resonance damping. The tonearm is a solid aluminum design with ball bearings and a damped tonearm lift, offering fine-tuning capabilities with adjustable tracking force and anti-skating for accurate record tracking. Advance Paris AIR 65 Speakers: The Advance Paris AIR 65 Connected speakers are a versatile hi-fi solution, featuring integrated Bluetooth for easy wireless streaming from phones and laptops. They offer extensive connectivity, including Optical and Coaxial Digital inputs, two RCA Analog inputs, and a crucial Phono MM (Moving Magnet) input, making them instantly turntable-ready. For those seeking even higher fidelity, the speakers can be upgraded with the optional WTX-MicroStream network adapter to enable Wi-Fi audio streaming via the Advance PlayStream app. Whether you're listening to digital sources or spinning vinyl, control is simple with the included remote control.

DALI KUPID Standmount Speakers

The DALI KUPID is the perfect blend of style and substance, designed to effortlessly integrate into your home while delivering an undeniably powerful and true Hi-Fi sound experience. Don't let the compact size fool you. KUPID delivers crystal-clear highs and rich, room-filling lows that let you feel every note, thanks to DALI’s advanced acoustic engineering. This speaker distills over 40 years of DALI loudspeaker design and manufacturing into its purest, most accessible form, ensuring a listening experience filled with rich detail and clarity. KUPID adds a splash of personality to any space with its bold colours and soft, rounded edges. It’s compact, easy to place, and offers versatile mounting, ensuring it perfectly complements your unique Key Features: Compact 2-way Bookshelf Speakers Recommended Amp. Power 40 - 120 watts Frequency Range [+/- 3 dB] 63 - 25,000 Hz

Wharfedale Super Linton ‘Vintage Grey’ Speaker Grilles

Crafted with the same meticulous attention to detail that defines Wharfedale’s craftsmanship, the ‘Vintage Grey’ Grille integrates seamlessly with the Super Linton cabinets, irrespective of finish (Walnut, Mahogany or Black Oak), ensuring that both form and function remain uncompromised. It’s a perfect way to celebrate the legacy of these iconic models while adding a touch of individuality to your listening space. Please note: Speakers available seperately

Wharfedale Linton ‘Vintage Grey’ Speaker Grilles

Crafted with the same meticulous attention to detail that defines Wharfedale’s craftsmanship, the ‘Vintage Grey’ Grille integrates seamlessly with the Linton cabinets, irrespective of finish (Walnut, Mahogany or Black Oak), ensuring that both form and function remain uncompromised. It’s a perfect way to celebrate the legacy of these iconic models while adding a touch of individuality to your listening space. Please note: Speakers available seperately

Quad ESL-2912X Floorstanding Speakers

In 2019, the ESL X concept was born from an in-depth review of the QUAD Electrostatic manufacturing facility, a suite exclusively dedicated to producing QUAD ESL speakers. The ESL 2912X is the flagship model in the ESL X lineup. With an expanded six-panel design, it delivers a larger radiating area, higher sound pressure levels, and increased dynamics. This allows the 2912X to create a more immersive listening experience with deeper bass and richer textures. Built for the ultimate audiophile, it brings even the most complex music to life with enhanced dynamic range, improved headroom, and a spacious soundstage.

Quad ESL-2812X Floorstanding Speakers

In 2019, the ESL X concept was born from an in-depth review of the QUAD Electrostatic manufacturing facility, which is exclusively dedicated to producing QUAD ESL speakers. While the ESL X series features the flagship ESL 2912X, the more compact ESL 2812X delivers the same signature QUAD sound. With a unique four-panel design and sharing the same treble and midrange panels as the 2912X, the 2812X produces an ultra-transparent, highly detailed, and effortlessly natural sound. Vocals and acoustic instruments sound so lifelike, it's as if they are in the room with you. The 2812X offers all of this in a smaller, lighter, and less imposing format, standing at just 1070mm high.

KEF Q1 Meta - Standmount Speakers

DALI Epikore 7 Floorstanding Speakers

The EPIKORE 7 stands as a high-end, compact floorstanding loudspeaker, representing a significant evolution of both the DALI EPICON series and our flagship DALI KORE. This 3½-way masterpiece is engineered to deliver a world-class visual and musical performance in medium to large-sized rooms. It achieves this by seamlessly combining two low-loss, 7-inch DALI bass/midrange drivers with our unique DALI EVO-K™ Hybrid Tweeter module. Key Features:  3½-way Speaker with 2 x 7-inch DALI bass/midrange driver & 1 x DALI EVO-K™ Hybrid Tweeter module Technologies from our flagship DALI KORE loudspeaker Developed, designed and built by DALI in Denmark Curved cabinet, real wood veneer and sumptuous piano-finish lacquering

DALI EPIKORE 3 Standmount Speakers

The EPIKORE 3 masterfully distills the advanced technologies found in DALI's acclaimed EPICON and KORE series into a compact, stand-mount loudspeaker format, making it ideal for smaller listening environments. This sophisticated 3-way loudspeaker features a low-loss, 7-inch DALI bass/midrange driver seamlessly integrated with the innovative DALI EVO-K™ Hybrid Tweeter module, delivering an audio experience of exceptional clarity and detail. Key Features: 7-inch DALI bass/midrange driver with the unique DALI EVO-K™ Hybrid Tweeter module. Technologies from our flagship DALI KORE loudspeaker Developed, designed and built by DALI in Denmark Curved cabinet, real wood veneer and sumptuous piano-finish lacquering

DALI Epikore 3 Speaker Stands

The EPIKORE STAND is a meticulously engineered, ultra-rigid stand mount designed to unlock the full audio potential of your DALI EPIKORE 3 loudspeakers. Every detail, from its robust aluminum construction and spike-feet outriggers to its internal cable routing and sand-fill option, contributes to an unparalleled listening experience. Key Features: Designed for the EPIKORE 3 Crafted from high-quality cast, extruded, and machined aluminum Arrives fully assembled 8 x Magnetic spike feet

DALI Epikore 11 Floorstanding Speakers

Leveraging 40 years of audio expertise, the exceptional 4½-way EPIKORE 11 floorstanding loudspeaker delivers unparalleled sound. It features four powerful 8-inch woofers, a highly dynamic 6½-inch midrange driver, and our signature EVO-K Hybrid Tweeter module, all housed within an advanced, real-wood veneer cabinet.  Key Features:  4½-way Speaker with 4 x 8 inch / 1 x 6½ inch bass/midrange driver, 1 x 10 × 55 mm planar magnetostatic tweeter, 1 x 35 mm soft dome Technologies from our flagship DALI KORE loudspeaker Developed, designed and built by DALI in Denmark Curved cabinet, real wood veneer and sumptuous piano-finish lacquering

DALI Epikore 9 Floorstanding Speakers

The DALI EPIKORE 9 is a high-end, 4-way floorstanding loudspeaker that represents the natural evolution of our acclaimed DALI EPICON series and our flagship DALI KORE speaker. It masterfully combines patented technologies with exceptional build quality and premium materials to deliver a world-class visual and musical experience, specifically designed for large listening spaces.  Key Features: 4-way design with 2 x 8 inch / 1 x 6½ inch, 10 × 55 mm planar magnetostatic tweeter, 1 x 35 mm soft dome Technologies from our flagship DALI KORE loudspeaker Developed, designed and built by DALI in Denmark Curved cabinet, real wood veneer and sumptuous piano-finish lacquering

Wharfedale EVO 5.1 Stand

The EVO 5.1 Stands are engineered to position your Wharfedale EVO 5.1 speakers at the perfect height. This ensures enhanced audio clarity, depth, and balance across your listening area. With a sleek design that complements your speakers, these stands don't just improve aesthetics; they unlock your speakers' full sonic potential. Specification Height: 633mm Top Plate: 220 x 285mm Base: 302 x 350mm 13.5kg Each High Carbon Steel construction with High Carbon Steel + MDF paint base Rubber Feet 

Wharfedale EVO 5.2 Stand

The EVO 5.2 Stands are engineered to position your Wharfedale EVO 5.2 speakers at the perfect height. This ensures enhanced audio clarity, depth, and balance across your listening area. With a sleek design that complements your speakers, these stands don't just improve aesthetics; they unlock your speakers' full sonic potential. Specification Height: 478mm Top Plate: 260 x 350mm Base: 302 x 350mm 13.3kg Each High Carbon Steel construction with High Carbon Steel + MDF paint base Rubber Feet

Wharfedale EVO 5.4 Floorstanding Speakers

The Wharfedale EVO 5.4 is the flagship of the EVO series, a powerful 3-way floorstanding speaker designed for ultimate high-fidelity. It features a 35 x 70mm AMT tweeter for pristine highs, a 2" (50mm) Soft Dome midrange for natural vocals, and dual 6.0" (165mm) Black Woven Kevlar bass drivers for deep, impactful low-end. This combination delivers an immersive, detailed, and dynamic sound that rivals far pricier systems. Key Features: 3-way Floorstanding design 35 x 70mm AMT (Air Motion Transformer) Tweeter 2"(50mm) Soft Dome 2 x 6"(165mm) Black Woven Kevlar Cone 3 Year Warranty

Wharfedale EVO 5 C Centre Speaker

The Wharfedale EVO 5.C is a dedicated 2-way centre speaker, crucial for a truly immersive home cinema experience. It features the signature 35 x 70mm AMT (Air Motion Transformer) tweeter for pristine, articulate dialogue and high-frequency detail. 1  Dual 5" (130mm) Black Woven Kevlar Cone bass drivers ensure powerful, clear delivery of vocals and crucial mid-range effects. 2  Perfectly voice-matched with the EVO series, the EVO 5.C delivers impactful, intelligible sound, anchoring your movie soundtracks with exceptional clarity and depth.  Key Features: 2-way Centre Speaker 35 x 70mm AMT (Air Motion Transformer) Tweeter 2 x 5"(130mm) Black Woven Kevlar Cone 3 Year Warranty

Wharfedale EVO 5.2 Standmount Speakers

The EVO 5.2 is a remarkable 3-way bookshelf speaker from the Wharfedale EVO range, engineered to deliver a high-fidelity experience that genuinely rivals far more expensive high-end audio systems. Whether you're an audiophile meticulously seeking nuanced musical expression or a casual listener simply desiring exceptional clarity and depth, the EVO 5.2 unlocks a rich and immersive audio experience that stands toe-to-toe with significantly pricier offerings. Key Features 3-way Bookshelf design 35 x 70mm AMT (Air Motion Transformer) Tweeter 2"(50mm) Soft Dome 6.0"(165mm) Black Woven Kevlar Cone 3 Year Warranty

Wharfedale EVO 5.3 Floorstanding Speakers

Step into a world of expansive, detailed, and captivating audio with the Wharfedale EVO 5.3. This superb 3-way floorstanding speaker, part of the acclaimed EVO series, delivers a high-end experience without the high-end price. At its core is the signature 35 x 70mm AMT (Air Motion Transformer) tweeter. This innovative pleated design moves four times more air than traditional tweeters, ensuring exceptional clarity and detail, fast transient response and ultra-low distortion. Key Features: 3-way Floorstanding design 35 x 70mm AMT (Air Motion Transformer) Tweeter 2"(50mm) Soft Dome 2 x 5"(130mm) Black Woven Kevlar Cone 3 Year Warranty

Wharfedale EVO 5.1 Standmount Speakers

The Wharfedale EVO 5.1 is the compact, 2-way bookshelf speaker of the EVO range, yet it delivers an immersive, high-fidelity experience that challenges far more expensive high-end audio systems. Whether you're an audiophile seeking nuanced musical expression or a casual listener desiring clarity and depth, the EVO 5.1 unlocks a rich audio experience that rivals significantly pricier offerings. Key Features 2-way Bookshelf design 35 x 70mm AMT (Air Motion Transformer) Tweeter 5"(130mm) Black Woven Kevlar Cone Bass Driver 3 Year Warranty

Ruark MR1 MK3 Bluetooth Speakers

Ruark is excited to announce the launch of the MR1 Mk3, the newest iteration of its highly praised MR1 desktop speaker system, originally released in 2013. Though it bears a striking resemblance to previous models, nearly every aspect of the MR1 Mk3 has been re-engineered, delivering superior performance and adaptability to this iconic Ruark design. Key Features: Amplifier tech adopted from our award winning R410 In-Room frequency range: 50Hz – 22kHz USB Audio input for direct connection and best quality playback from computers and smart devices Bluetooth with AptX HD allowing better than CD streamed sound quality High quality MM Phono stage, with variable gain for cartridge matching Ruark 20mm silk dome tweeter Ruark NS+ 85mm long throw woofer with treated natural fibre cone Combined Aux and Optical input Subwoofer output via mono RCA connector High-resolution wireless audio Exceptionally versatile – from use with TV and turntables to home office and gaming setups

PMC Prophecy C Centre Speaker

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you are interested, please click on the 'Enquire' button above.  The Prophecy.c combines extensive multichannel expertise with a compact, innovative design, delivering outstanding voice intelligibility and seamless integration for both music and movies. PMC is renowned for its mastery of immersive audio. With a history of mixing in their own studios in London, LA, and Nashville, and with many of Hollywood’s most iconic soundtracks and films created using PMC loudspeakers, the company has an unparalleled understanding of what is required for the perfect multichannel experience. This expertise is embedded in the design of the Prophecy.c. Like all speakers in the Prophecy range, the Prophecy.c incorporates a bespoke Advanced Transmission Line bass loading system, refined to make it an exceptional full-range speaker on its own. The unique design positions the two mid/bass drivers at different points along the long-folded transmission line, effectively reducing coloration in the critical vocal range, which is essential for clear dialogue, while improving integration with the treble driver. Additionally, the front-venting LaminairX technology allows for flexible placement near walls without sacrificing performance. PMC’s speakers are more than just audio equipment—they are the tools that bring music and movies to life. The Prophecy.c enables listeners to immerse themselves fully in the drama of a film or the richness of multichannel music.

PMC Prophecy 9 Floorstanding Speakers

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you are interested, please click on the 'Enquire' button above.  The flagship of the Prophecy series, the Prophecy9 is a cutting-edge floor-standing speaker that redefines what’s possible in hi-fi audio. No other speaker in its class even comes close to matching its performance. While all Prophecy models deliver a performance that belies their compact size, the Prophecy9 takes things to another level, offering an unparalleled soundstage, extraordinary dynamics, and pure musical enjoyment that will exceed even the highest expectations. At the core of the Prophecy9, the precision soft-dome tweeter and a superb 55mm soft-dome midrange driver are housed in a meticulously profiled baffle, incorporating proprietary waveguide technology. This ensures effortlessly spacious, lifelike vocals and beautifully extended high frequencies, perfectly capturing the recorded space with stunning clarity. The dual custom long-throw bass units, paired with PMC’s Advanced Transmission Line and the innovative LaminairX aerodynamic airflow technology, provide not only deep, extended bass but also bring out every subtle nuance in the low frequencies—delivering everything from whisper-quiet passages to powerful, visceral impact. While the Prophecy9 performs brilliantly with modest amplification, it has the ability to evolve alongside your system, revealing more as your setup grows. Its sleek design, with full-face grilles secured by hidden magnets, ensures that even this flagship model will blend seamlessly into any room.

PMC Prophecy 7 Floorstanding Speakers

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you are interested, please click on the 'Enquire' button above.  By integrating PMC's renowned soft-dome midrange driver with Prophecy’s expertly crafted treble and bass engineering, the Prophecy7 elevates the listening experience to extraordinary new levels, catering to both music and movie lovers alike. Once considered the domain of larger speakers, the Prophecy7 sets new benchmarks in performance and specification within its class. At its heart is an innovative waveguide, exclusive to Prophecy, which houses the dedicated midrange driver in this advanced three-way design. This ensures crystal-clear vocal clarity and dynamic instrumental textures, all rendered with exceptional transparency. Further enhancing sound quality, the system allows the bass and tweeter to focus on their distinct frequency ranges, with a custom, hand-built crossover that is meticulously tuned for seamless driver integration. Complementing the precision of the midrange and treble is a custom bass driver featuring the latest Advanced Transmission Line technology, combined with the groundbreaking LaminairX airflow system. This innovation guarantees that the Prophecy7, though compact, delivers both refined detail and immense power.

PMC Prophecy 5 Floorstanding Speakers

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you are interested, please click on the 'Enquire' button above.  The prophecy5 is a sleek, compact floorstanding speaker that delivers impressive sound in small to medium-sized rooms. Featuring a custom 5.5-inch bass driver, an extended Advanced Transmission Line (ATL) cabinet, and advanced LaminairX airflow technology, it offers deep, powerful bass and precise stereo imaging. Its custom tweeter ensures excellent dispersion, filling the room with clear, dynamic sound. Sized like a bookshelf speaker, the prophecy5 performs well even with budget electronics and excels with high-quality amplification. Its elegant design includes magnetically attached grilles in textured fabric, adding a stylish yet discreet touch. Building on PMC’s decade of innovation, the prophecy5 incorporates the latest LaminairX technology, delivering exceptional performance in a compact package.

PMC Prophecy 1 Standmount Speakers

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you are interested, please click on the 'Enquire' button above.  The smallest model in the Prophecy range is a marvel of innovation, effortlessly handling even the most demanding music. Expertly hand-built in Britain, it features the latest version of PMC’s ATL bass loading, enhanced by our proprietary LaminairX airflow technology, delivering stunning dynamics and scale at any volume. This compact yet powerful speaker offers exceptional transparency, bringing vocals to life and revealing every detail of a recording, all while maintaining a seamless, captivating musical experience. Its thoughtful design makes it easy to drive, whether paired with modest or high-end amplification. The timeless aesthetic, featuring real wood finishes, complements any interior style. Hidden fixings ensure a sleek, uncluttered look, while the magnetically attached grille with an elegant, textured fabric weave adds a refined touch. More than a decade after PMC’s engineers first brought F1 aerodynamic principles to the world of audio with Laminair, the Prophecy series introduces its latest evolution—patent-protected LaminairX—working seamlessly alongside ATL for unparalleled performance.

Bluesound WM230 Speaker Stand for PULSE M

Mount your PULSE M with ease using the WM230 Wall Mount and adjust the speaker to your preferred position. Crafted with precision and high-quality materials to complement the PULSE M, the WM230 features a swivel design that lets you rotate and lock the speaker at the perfect angle for optimal sound performance. Even when mounted, cable management remains simple with convenient access to all connections. Key Features: Custom-designed for the Bluesound PULSE M speaker. Keyhole slots for flexible and precise speaker placement. Full access to all cable connections. 180° total swivel control for optimal positioning. Available in black and white finishes to match the PULSE M.

Bluesound PULSE SUB+

Take your sound experience to new heights with the PULSE SUB+ wireless powered subwoofer. Engineered to complement Bluesound wireless speakers, stereo components, and home theatre systems, this subwoofer boasts an 8” woofer and a smart DSP amplifier that delivers 150 watts of deep, precise bass without any distortion. Its sleek, compact design and wireless connectivity offer unmatched placement flexibility, while the BluOS app makes setup a breeze, allowing you to pair, adjust volume, and fine-tune crossover settings all from your device in just minutes. Key Features:  Designed to use with Bluesound wireless speakers, home theater, or stereo components* 150 watt subwoofer that adds deep bass to music, movies, and games 8" woofer controlled by a smart DSP amplifier for controlled distortion-free output Wireless design lets you place the subwoofer anywhere without worrying about wires Sleek and compact to fit beside, behind or beneath your furniture Simple to pair and set-up in minutes using the BluOS Controller App Pairs well with other Bluesound amplifiers and streamers as well as the Wireless Soundbar+ Stand it up, lay it down, or mount it with the custom mounting bracket (included) *Generation 2 models or newer

Bluesound PULSE FLEX BP100 Battery Pack

Take your music anywhere with the PULSE FLEX. Whether you're streaming via Bluetooth from your smartphone, tablet, or any other device, or connecting to your home network for wireless listening, the PULSE FLEX delivers premium sound both indoors and outdoors.  For even more freedom, add the BP100 Battery Pack to your PULSE FLEX speaker*. This portable solution lets you enjoy music virtually anywhere—whether you're in the park, at a picnic, or lounging at home—without the need for a power outlet. Key Features: Turn your PULSE FLEX into a truly wireless speaker. Rechargeable battery pack with eight rechargeable AA batteries. Six hours of long-lasting listening on a single charge. Battery life indicators within the BluOS app. Available in black or white to match your PULSE FLEX.

Bluesound WM100 Wall Mount Bracket for PULSE FLEX

Easily mount your PULSE FLEX on the wall with the WM100 Wall Mount, and adjust it to the perfect position for optimal sound. Crafted with precision from high-quality materials, the WM100 is designed to complement the PULSE FLEX perfectly. Its tilt-and-swivel mechanism lets you fine-tune the speaker’s angle for the best listening experience, while providing seamless cable management and full access to all connections. Key Features: Custom-designed specifically for the Bluesound PULSE FLEX. Full access to all cable connections. Tilts up to 15 degrees and swivels 40 degrees for flexible positioning. Available in black and white finishes to match the PULSE FLEX.

Bluesound WM200 Wall Mount Bracket for PULSE MINI & PULSE 2i

The WM200 Wall Mount offers ultimate flexibility in placing your Bluesound PULSE, PULSE 2, or PULSE MINI anywhere in your home.  Engineered with precision and crafted from high-quality steel, the WM200 features a swivel design that lets you position your speaker at the ideal angle for enhanced sound. Removable rubber mouldings ensure easy cable management, keeping wires neatly hidden while maintaining a clean, streamlined look. Available in finishes that complement other Bluesound products, the WM200 helps your speaker seamlessly integrate into your home’s décor. Key Features: Securely mounts your PULSE or PULSE MINI to the wall. Built with durable, high-quality steel. 120° swivel control for flexible speaker placement. Rubber mouldings for easy and tidy cable management. Available in black or white finishes to match your speaker. Compatible with: PULSE, PULSE 2, PULSE 2i, PULSE MINI, and PULSE MINI 2i. Dimensions: 190mm x 130.5mm x 95mm. Weight: 1.02kg.

Bluesound PULSE MINI 2i Streaming Speaker

The PULSE MINI 2i powered speaker packs decades of high-fidelity audio heritage into a compact design. It delivers rich, detailed sound and fits effortlessly into smaller living spaces, offering an exceptional high-resolution music streaming experience. Key Features: Innovative dual acoustic chamber results in a stunning, size-defying performance. Experience deep bass and full-range sound free from distortion. Dual band Wi-Fi and support for 2-way Bluetooth aptX™ HD ensures music playback without interruption. Group two PULSE MINI 2i’s together for a seamless stereo pairing. Designed to fit seamlessly into your home decor. Control music wirelessly with the intuitive BluOS Controller app for iOS, Android, Kindle Fire, and Windows & Mac OS X desktops. Control it with the optional Bluesound RC1 Remote Controller. Connect Bluesound to your Amazon Echo with the skill in the Alexa app and use Amazon’s Alexa voice assistant to control Players around the home. AirPlay 2 lets you play music or podcasts from wireless speakers throughout your house — all in sync.

Bluesound PULSE 2i Streaming Speaker

The PULSE 2i is the ultimate powered streaming speaker from Bluesound, offering Bluetooth and multi-room capabilities to deliver rich, clear, high-resolution audio that fills even the largest spaces. When it comes to your music, settle for nothing less than high-fidelity sound. Key Features: Bluesound’s flagship all-in-one, multi-room speaker. Top-performing drivers deliver a powerful listening experience greater than other all-in-one speakers. Bluesound’s innovative amp technology ensures flawless music playback without any distortion. Dual band Wi-Fi and support for 2-way Bluetooth aptX™ HD ensures music playback without interruption. Control how and where you listen to your music with the intuitive BluOS Controller app. Control it with the optional Bluesound RC1 Remote Controller Stream to multiple Bluesound players throughout the entire home. Connect Bluesound to your Amazon Echo with the skill in the Alexa app and use Amazon’s Alexa voice assistant to control Players around the home. AirPlay 2 lets you play music or podcasts from wireless speakers throughout your house — all in sync.

Bluesound PULSE M Streaming Speaker

The PULSE M delivers immersive, rich sound that fills the room from nearly every angle. Its innovative Omni-Hybrid™ driver design features an up-firing woofer and two tweeters positioned at 45-degree angles for a wide, balanced soundstage. Not only does the PULSE M captivate with its audio performance, but its sleek elliptical shape also brings a touch of elegance to any space. Key Features: Wireless music streaming speaker that delivers immersive, room-filling sound DSP smart amplifier and Omni-Hybrid™ driver arrangement are meticulously engineered to deliver clear, lush audio at nearly every listening angle Control music wirelessly with the intuitive BluOS Controller app for iOS, Android, Kindle Fire, and Windows & Mac OS X desktops. Place one in any or every corner of your home and let it add a contemporary touch to your décor Group two PULSE Ms with the PULSE SOUNDBAR+ or POWERNODE and create a wireless surround sound system with dedicated rear channels. Control it with the optional Bluesound RC1 Remote Controller Connect Bluesound to your Amazon Echo with the skill in the Alexa app and use Amazon’s Alexa voice assistant to control Players around the home. AirPlay 2 lets you play music or podcasts from wireless speakers throughout your house — all in sync.

Pro-Ject Speaker Box 5E Carbon

The Speaker Box 5 E Carbon features a 1" silk dome tweeter paired with a unique 5" fibreglass-carbon composite woofer. Housed in an ultra-rigid, non-resonant MDF cabinet, this speaker offers exceptional audiophile-grade sound reproduction.  With a flat frequency response from 65Hz to 20kHz, it delivers crisp, detailed highs and a powerful, well-defined bass that maintains musicality across all genres.  For optimal performance, we recommend pairing it with an amplifier that delivers at least 10 watts per channel. The Stereo Box S3 BT or MaiA S3 are ideal companions for this speaker. The Speaker Box 5 E Carbon's design is understated yet elegant, seamlessly fitting into any décor. It is available in a variety of finishes to suit personal preferences, and black speaker grills are included in the package. Key Features: 2-way bass reflex principle Audiophile frequency response Cutting edge fibre glass carbon composite woofer Low coloration and great transparency Highly detailed sound stage Gold plated banana terminals Non-resonating MDF cabinet Wall mount sold separately Magnetic speaker grills included  

Wharfedale Super Linton Standmount Speakers

The updated Wharfedale SUPER LINTON marks a significant achievement in innovation for the brand, enhancing the acclaimed Heritage series that is among the best-selling in the world.  This new model is part of an award-winning lineup of speakers celebrated for their remarkable musical performance, captivating the hearts of countless music enthusiasts. Under the guidance of Peter Comeau, the Director of Acoustic Design, Wharfedale's engineers carefully reexamined every element of the speaker's design, including the cabinet, drive units, and crossover. The result of their meticulous work is the newly refined Super Linton.  The SUPER LINTON speakers is offered in three elegant finishes: Walnut, Mahogany and Black Oak.

Ruark Sabre-R Standmount Speakers

With countless customers still appreciating our original Sabre loudspeakers, introduced in 1985, the Sabre-Rs are similarly crafted to endure and captivate a new generation of music enthusiasts. Honoring Ruark’s legacy, the Sabre-Rs have been meticulously designed and enhanced to ensure that the materials and components seamlessly combine, providing you with an endless musical experience. Key Features: For stand-mount or bookshelf use 2-way tuned bass reflex design Ruark 26mm silk dome tweeter Ruark 15cm treated natural fibre cone woofer

Scansonic Q10 Floorstanding Speakers

This speaker is ideal for large rooms and home cinema setups. Featuring dual 8” woofers, the Q10 delivers powerful sound suitable for high SPL and full-range reproduction. It includes a ribbon tweeter for sparkling highs and features a 3-way design with carbon fiber drivers for dynamic, organic music performance. The cabinet is impressively crafted with perfect fit and finish, offering exceptional quality at its price point.

Scansonic Q8 Floorstanding Speakers

This is the first Scansonic loudspeaker to feature an 8” woofer, offering deep, punchy bass. Its 3-way design with a carbon fibre midrange and woofer ensures dynamic, natural sound, while the ribbon tweeter provides smooth, detailed highs. The cabinet quality and flawless finish are exceptional, especially at this price point.

Scansonic Q3 Floorstanding Speakers

The Q3 is a slim floor-standing speaker featuring two 5.25” carbon-coned drivers and a sealed ribbon tweeter, classified as a 2.5-way speaker. Its design allows the second woofer to enhance bass performance, delivering a solid sound that belies its sleek appearance. The Q3 provides impressive coherence in sound, making it a pleasure to listen to. The Raidho-inspired ribbon tweeter adds remarkable high-end quality for its price range, elevating this elegant loudspeaker. The cabinet quality is exceptional, with perfect fit and finish, a rarity at this price point.

DALI RUBIKORE On-Wall Speaker

The RUBIKORE ON-WALL loudspeaker offers high-end Hi-Fi performance in a sleek, easy-to-install wall-mount design, making it perfect for both stereo and multichannel applications. Key Features: 1 x  17 x 45 mm planar, 1 x 29 mm soft dome tweeter 1 x 6½" Low Frequency/Midrange Driver(s) Frequency Range [+/- 3] dB [Hz] 59 - 34,000 Handcrafted by DALI in Denmark

DALI RUBIKORE Cinema Speaker

The RUBIKORE CINEMA represents the pinnacle of DALI's home cinema loudspeakers, balancing formidable power for ambitious systems with a compact design ideal for most living spaces. Key Features: 1 x 17 x 45 mm planar driver, 1 x 29 mm soft dome tweeter 2 x 6½" Low Frequency/Midrange Driver(s) Frequency Range [+/- 3] dB [Hz] 49 - 34,000 Handcrafted by DALI in Denmark

DALI RUBIKORE 6 Floorstanding Speakers

The RUBIKORE 6, a compact floor-standing speaker, is engineered for high-end stereo and home theater systems in medium to large rooms, offering exceptional installation versatility. Key Features: 1 x 17 x 45 mm planar driver, 1 x 29 mm soft dome tweeter 2 x 6½" Low Frequency/Midrange Driver(s) Frequency Range [+/- 3] dB [Hz] 38 - 34,000 Handcrafted by DALI in Denmark

DALI RUBIKORE 2 Standmount Speakers

The RUBIKORE 2 excels in musical intricacy, producing impressive soundscapes characterised by surprisingly generous bass with precise timing. It seamlessly combines compact size with expansive sound quality. Key Features: 1 x 29 mm soft dome tweeter 1 x 6½" Low Frequency/Midrange Driver(s) Frequency Range [+/- 3] dB [Hz] 50 - 26,000 Handcrafted by DALI in Denmark

DALI RUBIKORE 8 Floorstanding Speakers

The DALI RUBIKORE 8 effortlessly produces exceptional musical soundscapes. Its powerful trio of woofers seamlessly integrates bass and midrange frequencies, complemented by the precise detail and expansive dispersion of its DALI hybrid tweeter, ensuring optimal performance even in expansive listening environments. Key Features: 1 x 17 x 45 mm planar driver, 1 x 29 mm soft dome tweeter 3 x 6½" Low Frequency/Midrange Driver(s) Frequency Range [+/- 3] dB [Hz] 38 - 34,000 Handcrafted by DALI in Denmark

Mission 750 Standmount Speakers

Building upon the legacy of the acclaimed flagship Mission 770, which marked Mission's resurgence in UK-based manufacturing, and more recently, the Mission 700, the newly introduced Mission 750 extends the award-winning 'modern-classic' design into a distinct price range and category. Key Features:  Two-way Standmount Speakers 1 x 5.25" (135mm) mineral loaded polypropylene cone 1 x 1.25" (28mm) Soft Dome Walnut or Black Oak real wood veneer with white bafe finish

Sonus Faber Sonetto V G2 Floorstanding Speakers

Sonetto V epitomises technological innovation, crafting an engaging sound that resonates with the essence of music. As a 3-way floorstanding speaker, it embodies Sonus faber's core design principles, delivering an intense and vibrant audio experience. With its ability to capture the dramatic nuances of sound, Sonetto V establishes a robust and precise soundstage. Key Features: 3 way Design Midrange sealed cork enclosure, Woofers down vented box Tweeter: 1.1" DAD™ Arrow Point extended frequency tweeter, Copper shorting ring Midrange: 1 x 6.5" Camelia midrange, Copper shorting ring Woofer: 2 x 6.5" woofers, Aluminum demodulation ring 35Hz - 40.000Hz Frequency Response Protective grille included

Sonus Faber Sonetto Stand G2

Specifically to match the Sonus Faber Sonetto I G2 and Sonetto II G2 speakers, these stands are made from Aluminum, Concrete and Iron Steel to provide a stable base for your speakers.  Product Specifications: Built in Cable management Decoupling Spikes included Dimensions: 335.05 x 687.46 x 406.33mm (W x H x D) Weight: 6.5kg each Compatible with: Sonus Faber Sonetto I G2 and Sonus Faber Sonetto II G2

Sonus Faber Sonetto Wall G2 Speaker

Sonetto Wall G2 is a multi-functional high-fidelity loudspeaker designed for on wall-mounting, offering an immersive home audio experience. Key Features: 2 Way Sealed box design Tweeter: 1.1" DAD™ Arrow Point extended frequency tweeter, Copper shorting ring Midwoofer: 1x 6.5", Aluminum demodulation ring 60 Hz- 40.000 Hz Frequency Response Adjustable jointed bracket Protective grille included Please note: Price per speaker

Sonus Faber Sonetto I G2 Standmount Speakers

The Sonetto I is the smallest model in the Sonetto range, offering a meticulously balanced bookshelf speaker. It features a front-facing optimised reflex duct for a captivating, immersive audio experience. Whether utilised standalone or on its dedicated stands, the Sonetto I is the perfect sound solution for compact environments, designed for effortless setup and exceptional performance. Key Features: 2 way Midwoofer front vented box Tweeter: 1.1" DAD™ Arrow Point extended frequency tweeter, Copper shorting ring Midwoofer: 1 x 5", Aluminum demodulation ring 52 Hz - 40.000Hz Frequency Response Protective grille included Optional matching Sonetto Stand G2 speaker stands available

Sonus Faber Sonetto II G2 Standmount Speakers

Sonetto II embodies the renowned Italian aesthetic of its predecessor, enhanced with refined materials, sophisticated design, and advanced acoustical engineering. It delivers sound with profound emotional depth and remarkably powerful bass reproduction, ensuring an unparalleled auditory experience. Key Features: 2 way Midwoofer front vented box Tweeter: 1.1" DAD™ Arrow Point extended frequency tweeter, Copper shorting ring Midwoofer: 1 x 6.5", Aluminum demodulation ring 42 Hz - 40.000Hz Frequency Response Protective grille included Optional matching Sonetto Stand G2 speaker stands available

Sonus Faber Sonetto III G2 Floorstanding Speakers

With its sleek design and exceptional power, the Sonetto III exemplifies innovation. This sophisticated 2.5-way system features a newly designed flower-patterned suspension mid-woofer from the Sonus faber DesignLab in Italy. Every detail is meticulously crafted to ensure an unmatched listening experience. Key Features: 2.5 way Midwoofer rear vented box, Woofer down vented box Tweeter: 1.1" DAD™ Arrow Point extended frequency tweeter, Copper shorting ring Midwoofer: 1 x 6.5", Aluminum demodulation ring Woofer: 1 x 6.5" woofer, Aluminum demodulation ring 38Hz - 40.000Hz Frequency Response Protective grille included

Sonus Faber Sonetto VIII G2 Floorstanding Speakers

Inspired by Italian poetry and brought to life through Sonus faber’s advanced technologies, the Sonetto VIII is the flagship model of the new Sonetto G2 collection. This meticulously crafted speaker is a testament to audio excellence, seamlessly integrating the organic legacy of the Suprema system into a 3-way floorstanding design. The Sonetto VIII exemplifies Sonus faber's signature elements, embodying a design philosophy grounded in Natural Sound and the use of natural materials. This high-end luxury speaker, hand-crafted in Italy, represents a visionary pursuit of sonic perfection. Key Features: 3 way Design Midrange sealed cork enclosure, Woofers down vented box Tweeter: 1.1" DAD™ Arrow Point extended frequency tweeter, Copper shorting ring Midrange: 1 x 6.5" Camelia midrange, Copper shorting ring Woofer: 2 x 8" woofers, Aluminum demodulation ring 30Hz - 40.000Hz Frequency Response Protective grille included

Sonus Faber Sonetto Center G2 Channel Speaker

At the heart of the home theater system, the Sonetto Center enhances immersion, delivering a profoundly immersive listening experience. Key Features: 3 way sealed enclosure, rear vented box Tweeter: 1.1" DAD™ Arrow Point extended frequency tweeter, Copper shorting ring Midrange: 1 x 4" Camelia midrange, Copper shorting ring Woofer: 2 x 6.5" woofers, Aluminum demodulation ring 45 Hz - 40.000Hz Frequency Response Protective grille included

KEF Kube12 MIE Subwoofer

The Kube 12 MIE is engineered to produce deep, powerful bass, enhancing the immersive experience for music and movies alike. Boasting a 12-inch driver and a 300 Watts Class D amplifier, its Music Integrity Engine¨ ensures exceptional depth and dynamic performance. Key Features: 12-inch front-firing active subwoofer 300W Class D RMS amplifier Effortless wireless integration with the optional KW1 KEF SmartConnect, LFE and speaker level inputs 3 room position EQ options Multiple power modes with "Auto wake up", "Always on", "12v Trigger"

KEF Kube15 MIE Subwoofer

The Kube 15 MIE, the flagship model in the Kube series, is designed to deliver unparalleled bass performance for music and movies, ensuring an immersive experience that resonates deeply. Tailored for larger spaces, its 15-inch driver and 300W (RMS) Class D amplifier work in harmony to produce a powerful, dynamic bass output. Enhanced by Music Integrity Engine¨ technology, the Kube 15 MIE optimizes depth and fidelity, delivering exceptional audio performance. Key Features: 15-inch front-firing active subwoofer 300W Class D RMS amplifier Effortless wireless integration with the optional KW1 KEF SmartConnect, LFE and speaker level inputs 3 room position EQ options Multiple power modes with "Auto wake up", "Always on", "12v Trigger"

KEF Kube10 MIE Subwoofer

The Kube 10 MIE boasts a sealed cabinet housing a 10-inch bass driver and 300 Watts of power, ensuring exceptional bass extension and precise control. Enhanced by Music Integrity Engine¨ technology, it dynamically enriches bass depth and dynamics, maximizing its performance capability. Key Features: 10-inch front-firing active subwoofer 300W Class D RMS amplifier Effortless wireless integration with the optional KW1 KEF SmartConnect, LFE and speaker level inputs 3 room position EQ options Multiple power modes with "Auto wake up", "Always on", "12v Trigger"

Pro-Ject Speaker Box 3 E Carbon

This compact audiophile speaker is designed to deliver impressive sound despite its small size. Its sleek 2-way design allows for wall mounting, making it suitable for various uses. Key Features: Rear-firing port in a Bass-Reflex speaker cabinet to produce clean and controlled bass Ideal for home cinema and desktop use Equipped with a high-excursion fibre-composite cone woofer Comes with a removable speaker grille

Pro-Ject Speaker Box 3 E

This compact audiophile speaker is designed to deliver impressive sound despite its small size. Its sleek 2-way design allows for wall mounting, making it suitable for various uses. Key Features: Rear-firing port in a Bass-Reflex speaker cabinet to produce clean and controlled bass Ideal for home cinema and desktop use Equipped with a high-excursion fibre-composite cone woofer Comes with a removable speaker grille

Tannoy Super Gold Monitor 15"

The largest in the Super Gold Monitor range, the Monitor Gold heritage speaker by Tannoy has a rich history, dating all the way back to the 1980s. It has been the choice of numerous high-profile recording studios, used in the mixing and mastering of some of the most iconic albums and soundtracks in history. Artists like Michael Jackson, Elton John, The Eagles, Billy Idol, Depeche Mode, and Christina Aguilera, as well as soundtracks for films like Top Gun, Breakfast Club, and Catch Me if You Can, have all utilised Tannoy speakers as the final link in the studio's signal chain. And now, you can experience that legendary sound in the comfort of your own home with the Super Gold Monitor! Key Features: 15" passive studio main monitor based on the legendary Tannoy Super Gold Legendary Tannoy Dual Concentric driver technology provides class-leading phase coherence and point-source imaging Ultra-precise and neutral soundstage delivers Non fatiguing sound for extended listening sessions Front mounted control panel houses a 3 band energy control to compensate for varying acoustics characteristics and Environments Original classic cabinet design with modern components provides a genuine reproduction of the original classic monitor Front-firing bass port design allows near wall or soffit placement, ensuring optimal low frequency performance High density cabinet provides extreme rigidity to control low frequency performance Extensive bracing incorporating DMT (Differential Materials Technology) to couple driver to cabinet Heavy duty 24 carat multi-layer gold plated Tannoy customised binding posts for optimum signal transmission and integrity Precision machined gold anodised aluminium adjustment panel metal trim complements the aesthetic of the wood cabinet

Tannoy Super Gold Monitor 12"

The mid size in the Super Gold Monitor range, the Monitor Gold heritage speaker by Tannoy has a rich history, dating all the way back to the 1980s. It has been the choice of numerous high-profile recording studios, used in the mixing and mastering of some of the most iconic albums and soundtracks in history. Artists like Michael Jackson, Elton John, The Eagles, Billy Idol, Depeche Mode, and Christina Aguilera, as well as soundtracks for films like Top Gun, Breakfast Club, and Catch Me if You Can, have all utilised Tannoy speakers as the final link in the studio's signal chain. And now, you can experience that legendary sound in the comfort of your own home with the Super Gold Monitor! Key Features: 12" passive studio main monitor based on the legendary Tannoy Super Gold Legendary Tannoy Dual Concentric driver technology provides class-leading phase coherence and point-source imaging Ultra-precise and neutral soundstage delivers Non fatiguing sound for extended listening sessions Front mounted control panel houses a 2 band energy control to compensate for varying acoustics characteristics and Environments Original classic cabinet design with modern components provides a genuine reproduction of the original classic monitor Front-firing bass port design allows near wall or soffit placement, ensuring optimal low frequency performance High density cabinet provides extreme rigidity to control low frequency performance Extensive bracing incorporating DMT (Differential Materials Technology) to couple driver to cabinet Heavy duty 24 carat multi-layer gold plated Tannoy customised binding posts for optimum signal transmission and integrity Precision machined gold anodised aluminium adjustment panel metal trim complements the aesthetic of the wood cabinet

Tannoy Super Gold Monitor 10"

The Monitor Gold heritage speaker by Tannoy has a rich history, dating all the way back to the 1980s. It has been the choice of numerous high-profile recording studios, used in the mixing and mastering of some of the most iconic albums and soundtracks in history. Artists like Michael Jackson, Elton John, The Eagles, Billy Idol, Depeche Mode, and Christina Aguilera, as well as soundtracks for films like Top Gun, Breakfast Club, and Catch Me if You Can, have all utilised Tannoy speakers as the final link in the studio's signal chain. And now, you can experience that legendary sound in the comfort of your own home with the Super Gold Monitor! Key Features: 10" passive studio main monitor based on the legendary Tannoy Super Gold Legendary Tannoy Dual Concentric driver technology provides class-leading phase coherence and point-source imaging Ultra-precise and neutral soundstage delivers Non fatiguing sound for extended listening sessions Front mounted control panel houses a 2 band energy control to compensate for varying acoustics characteristics and Environments Original classic cabinet design with modern components provides a genuine reproduction of the original classic monitor Front-firing bass port design allows near wall or soffit placement, ensuring optimal low frequency performance High density cabinet provides extreme rigidity to control low frequency performance Extensive bracing incorporating DMT (Differential Materials Technology) to couple driver to cabinet Heavy duty 24 carat multi-layer gold plated Tannoy customised binding posts for optimum signal transmission and integrity Precision machined gold anodised aluminium adjustment panel metal trim complements the aesthetic of the wood cabinet

Tannoy Westminster Royal GR-OW

A 2-way floor-standing loudspeaker designed for large rooms, featuring 15" Concentric driver technology, delivers class-leading coherence and point-source imaging. Key Features: 15" highly efficient driver with 99 dB/Watt sensitivity and 700 Watt peak power PepperPot WaveGuide powered by Tannoy Alnico magnet system enhances point source symmetrical dispersion properties Aluminium-magnesium alloy diaphragm and Mylar surround compression driver delivers exceptional clarity and articulation throughout high frequency range Handcrafted oiled walnut veneered cabinet with hand-selected burr walnut inlays provides a unique and timeless piece of furniture capacitors, low loss laminated core inductors and thick film resistors delivering a more natural and cohesive sound bi-wireable binding posts to improve signal transmission and integrity Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity High density birch ply cabinet provides extreme rigidity to control low frequency performance Front midrange horn and rear loaded compound low frequency horn provide exceptionally high sensitivity and dynamics Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets Precision machined gold anodised aluminium metal trims complement the aesthetic of the real wood cabinet Specially formulated Prestige wood wax provided to keep cabinet in pristine condition  

Tannoy Canterbury GR-OW

The new 15-inch Gold Reference driver is Tannoy's most powerful and articulate Dual yet, boasting an impressive 600-watt peak power handling and over 96dB efficiency within the 235-litre Canterbury GR cabinet. Key Features: 2 way floorstanding loudspeaker Dual Concentric driver technology provides class-leading coherence and point-source imaging 15" highly efficient driver with 96 dB/Watt sensitivity and 600 Watt peak power handling PepperPot WaveGuide powered by Tannoy Alnico magnet system enhances the point source symmetrical dispersion properties Aluminium-magnesium alloy diaphragm and Mylar surround compression driver  Handcrafted oiled walnut veneered cabinet with hand-selected burr walnut inlays capacitors, low loss laminated core inductors and thick film resistors Bi-wireable binding posts to improve signal transmission and integrity Fifth binding post provides grounding to reduce radio frequency interference and improve midrange clarity High density birch ply cabinet provides extreme rigidity to control low frequency performance Variable Distributed Port system allows low frequency output to be tuned to suit any room dimensions Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets Precision machined gold anodised aluminium metal trims complement the aesthetic of the real wood cabinet Specially formulated Prestige wood wax provided to keep cabinet in pristine condition

Tannoy Kensington GR-OW

A 2-way floor-standing loudspeaker designed for large rooms, featuring dual 10" Concentric driver technology, delivers class-leading coherence and point-source imaging. Key Features: 10" highly efficient driver with 93 dB/Watt sensitivity and 500 Watt peak power handling delivers breathtaking dynamics and realism. Classic Pepperpot Waveguide and Alnico motor system provide a sweet, natural, and inherently coherent sound. Aluminum-magnesium alloy diaphragm and Mylar surround compression driver The handcrafted, oiled walnut-veneered cabinet with walnut inlays offers a unique and timeless piece of furniture. Specially treated crossovers featuring Tannoy customised capacitors, low-loss laminated core inductors, and thick film resistors Heavy-duty 24-carat multi-layer gold-plated Tannoy customised bi-wireable binding posts improve signal transmission and integrity. A fifth binding post provides grounding to reduce radio frequency interference and improves midrange clarity. High-density birch ply and particle board cabinet  The distributed port system offers powerful and extended low-frequency performance. Extensive bracing incorporating Differential Materials Technology (DMT) couples drivers to cabinets. A precision-machined gold anodised aluminum adjustment panel and metal trim complement the aesthetic of the real wood cabinet. Specially formulated Prestige wood wax is provided to keep the cabinet in pristine condition.

Tannoy Stirling III LZ Special Edition

More than just a tribute to the legendary III LZ first released in 1967, the Stirling III LZ Special Edition offers a wide frequency response and deep bass extension for natural imaging at high SPLs. Years of acoustic excellence have culminated in this moment; you'll hear every boom, breath, and beat with unprecedented clarity and depth. Key Features: 2 way floorstanding loudspeaker with Dual Concentric driver technology 10" highly efficient driver with 93 dB/Watt sensitivity and 500 Watt peak power handling Classic Pepperpot Waveguide and Alnico motor system  Aluminium-magnesium alloy diaphragm and Mylar surround compression driver Sophisticated crossover network, featuring Tannoy customised capacitors, low loss laminated core inductors and thick film resistors Front mounted control panel, houses 2 band energy control with boost and attenuation compensation for room design and tailoring to personal preference Tannoy customised bi-wire able binding posts to improve signal transmission and integrity Fifth binding post provides grounding to reduce radio frequency interference and improves midrange clarity Front firing Distributed Port system gives powerful and extended low frequency performance Handcrafted oiled walnut veneered cabinet, utilising high density particle board Extensive bracing incorporating DMT (Differential Materials Technology) to couple drivers to cabinets Precision machined, gold anodised aluminium Special Edition adjustment panel and metal trim complements the aesthetic of the real wood cabinet  

Tannoy Turnberry GR-OW

Featuring a Dual Concentric drive design, the Tannoy Turnberry GR-OW is a 2-way floorstanding loudspeaker that excels in medium to large rooms. It sets a new standard for coherence and point-source imaging, making it an outstanding choice for discerning audiophiles. A 10" highly efficient driver with 93 dB/Watt sensitivity and 400 Watt peak power handling offers breathtaking dynamics and realism. The Tulip Waveguide with a 33mm aluminum-magnesium dome enhances point source symmetrical dispersion, ensuring exceptional high-frequency clarity and articulation.  A low-frequency paper pulp cone with a twin-roll fabric surround provides natural-sounding midrange and bass transient performance. The handcrafted, oiled walnut-veneered cabinet with walnut inlays creates a unique and timeless piece of furniture. High-quality capacitors, low-loss laminated core inductors, and close-tolerance wirewound resistors deliver a more natural and cohesive sound. Custom gold-plated bi-wireable binding posts improve signal transmission and integrity, while a fifth binding post provides grounding to reduce radio frequency interference and enhance midrange clarity. The high-density particle board cabinet ensures extreme rigidity to control low-frequency performance, complemented by a distributed port system for powerful and extended low-frequency output. Extensive bracing with DMT (Differential Materials Technology) couples the drivers to the cabinet, and a precision-machined gold anodized aluminum adjustment panel and metal trim complement the real wood cabinet's aesthetic. The specially formulated Prestige wood wax maintains the cabinet in pristine condition.

Tannoy Supertweeter-Go

Audio is a powerful element of the cinematic experience, immersing you in the action, stirring your emotions, and elevating the overall enjoyment of the presentation. The Supertweeter-Go brings this exceptional performance into your home, encased in a luxurious high-end oiled American walnut plinth with a gold anodised tweeter housing and trim that is as visually stunning as it is acoustically impressive. Key Features: Extended frequency response tweeter for Tannoy Prestige GR range and other legacy speaker models 25 mm SuperTweeter with magnesium alloy dome and neodymium magnet system extends response to 61 kHz Very wide system audio bandwidth minimises phase error artefacts Low loss crossovers featuring ICW ClarityCap capacitors, air cored inductors and close tolerance non-inductive thick film resistors  Sensitivity and crossover point adjustable by gold plated brass setting screws to match any Tannoy model Tweeter pod angle adjustment to compensate for differing cabinet heights Easy setup for different loudspeaker models with included calibrated location gauge Gold plated brass binding posts improve signal transmission and integrity Oxygen free copper with high purity silver plating aids resolution of fine detail Earth binding post provides grounding to reduce radio interference and improve clarity Hand crafted American Walnut plinth with gold anodised tweeter housing and trims to match Prestige GR finish 

Tannoy Autograph Mini OW

The Autograph Mini-OW, a 2-way stand-mount HiFi loudspeaker with a 4" Dual Concentric driver, delivers cinematic audio performance to your home in a luxurious oiled walnut finish. It faithfully reproduces audio as envisioned by the original mastering engineer, removing itself from the soundscape to transport you to a higher sonic plane. Key Features: 2-Way Stand Mount Loudspeaker for Small Rooms Class-leading coherence and point-source imaging 4" driver with 200 Watt peak power handling delivers impressive dynamics for its compact size Ensures symmetrical dispersion for accurate stereo imaging 19 mm titanium dome driver offers exceptional wideband high-frequency clarity and articulation Handcrafted, oiled walnut veneered cabinet with solid walnut trim Low-frequency paper pulp cone with rubber surround Hard-wired crossovers with proprietary Tannoy capacitors and low-loss laminated core inductors Rear-ported design for deeper and richer bass response. Oatmeal grille cloth contributes to the classic aesthetic.

Tannoy Stirling GR-OW

Part of the Prestige GR series the Tannoy Stirling GR-OW are  compact 2-Way Floorstanding speakers featuring 10" Dual Concentric in a stunning Oiled Walnut. Product Features: 2 way Floorstanding loudspeaker for medium to large sized rooms Dual Concentric driver technology 10" highly efficient driver with 91 dB/Watt sensitivity and 340 Watt peak power handling Tulip Waveguide with 25mm aluminium-magnesium dome Low frequency paper pulp cone with twin roll fabric surround Handcrafted oiled walnut veneered cabinet with walnut inlays

PMC Twenty5 24i Active Floorstanding Speakers

Presenting the Active twenty5.24i, our largest model in the Active twenty5i series. This two-way speaker delivers the sound of a much larger three-way design, thanks to its optimised internal amplification of 200W per speaker, and active crossover that ensures optimal power to each driver. This speaker is ideal for large listening rooms, where it can provide compelling musical performances. The 19mm soft dome tweeter and 6.5-inch mid/bass driver are flawlessly integrated, and in combination with our ATL™ technology, they deliver a high-fidelity experience like no other. Simply add a preamplifier or a network player with volume control for a complete high-end system that takes up minimal space. The Active twenty5i series offers high-end audio with uncompromised performance, all packaged in a sleek and convenient design.

PMC Twenty5 23i Active Floorstanding Speakers

The Active 23i has been transformed into an elegant floor-standing design that is even more capable of filling medium-sized rooms with transparent, authentic dynamics and effortlessly extended bass. In the Active twenty5i range, the finishes are shared, allowing the speaker to blend unobtrusively into any room. The speaker features an active crossover and 2x100W amplification in each speaker, making it the best-selling model. Reviewer Chris Kelly praised the passive 23i, stating that when paired with a high-quality amplifier and a good source, it would never disappoint. The Active 23i has built-in amplification for a 'just add source' music solution. By combining the Active twenty5i series with a preamplifier or any streamer with a volume control, you can create a neat, stylish, and world-class music system.

PMC Twenty5 22i Active Standmount Speakers

Are you looking for a way to fill a larger space with high-quality sound without having to use bulky speakers? The Active twenty5.22i might be just what you need. It's slightly larger than the Active 21i model, but still has a sleek design that will fit perfectly in any room. With 200W of active amplification and ATL™ technology, this speaker is able to deliver a powerful and clean low-end sound that's perfectly balanced with the detailed high frequencies from the precision soft-dome treble unit. The Active twenty5.22i is incredibly agile and dynamic, whether you decide to place it on its dedicated stands or on a shelf. The active amplification system takes its performance to new levels, making it an ideal choice for anyone who wants a world-class music system. With 2x100W of amplification in each speaker, all you need is a preamplifier or streamer with volume control, and you're ready to go.

PMC Twenty5 21i Active Standmount Speakers

The Active twenty5.21i may be the smallest model in the new Active twenty5i range, but it boasts cutting-edge active amplification and benefits from PMC's Advanced Transmission Line technology. With 100W of power for each driver and an active crossover, this compact speaker delivers detailed bass, ultra-realistic mids, and delicate highs with maximum musicality. It's perfect for small-to-medium listening environments and can be mounted on a stand or a bookshelf. The Active twenty5.21i is an excellent choice for effects speakers in an immersive sound system, providing the bass impact you'd expect from a much larger design. The Active twenty5i series is the ideal solution for any music lover looking for an elegantly simple setup. Simply add a preamplifier or streamer with a volume control for a complete music system.

PMC twenty5i Active Upgrade Kit

Transform your passive twenty5 and twenty5i loudspeakers into active ones effortlessly. If you already own two-way twenty5 or twenty5i speakers, namely models 21, 22, 23, or 24, you can now enjoy the added advantages of improved resolution, control, and transparency by installing an Active upgrade pack. The newest active crossover and matched amplification for the speakers' treble and mid/bass sections deliver 100W to each driver, resulting in greater detail, effortless power, crisp transients, and wider-ranging dynamics. An active loudspeaker system also enables a more minimal hi-fi setup without requiring separate power amplification. You can easily connect the speaker using standard RCA interconnects or balanced XLRs to a broad range of one box streamers, players, or preamps, achieving a more compact and elegant system that's capable of even higher quality.

Wharfedale Super Denton Standmount Speakers

Part of Wharfedale's Heritage series, the Super Denton is based on vintage designs from the company's history but features cutting-edge drive unit, cabinet, and crossover technology. The Denton 80 anniversary model, the Denton 85, and the trend-setting Linton model launched the Heritage line in 2014 and rekindled interest in the classic big stand mount loudspeaker. Not many loudspeaker manufacturers can lay claim to a greater history than Wharfedale, and the Heritage series highlights this. It was recently enhanced with the high-end Dovedale model, which marked the return of UK manufacturing.

Sonus Faber Lumina V Amator Floorstanding Speakers

The Lumina collection by Sonus Faber presents an exciting change, new to the typical Sonus Faber product design portfolio but still able to embody the history and values of the brand. “Simplicity” is central to the collection’s identity which aims to reach a wide audience and to deliver a luxury music experience in all Sonus Faber homes, which is facilitated through our longstanding tradition of refined materials and careful craftsmanship. Amator is an evocative name, which has characterized all the special Sonus faber models, becoming synonymous with uniqueness. Any market enthusiast knows that from this name it is right to expect an exciting and engaging listen. The new Lumina V Amator crossovers have been designed inheriting to the legacy left by the development of the new Homage collection. Many of the solutions adopted on the new special models are derived from those of the Amati G5 and Guarneri G5. The IFF circuitry and the phase coherent philosophy ensure perfect rendering of the virtual sound stage in three dimensions. The new filters also offer greater resolution and more rigorous and coherent reproduction. Lumina V Amator is available in three new glossy finishes: red, wengé and walnut. A further stylish detail is the herringbone woodwork.

Sonus Faber Lumina II Amator Standmount Speakers

Wharfedale Aura C Centre Speaker

The Aura CS is a 2-way centre speaker with 2 x  6.5" bass driver and centre-mounted ribbon tweeter. AURA is the latest innovation in the family of class-leading Wharfedale speakers. Taking inspiration from the flagship ELYSIAN series through fit, finish and technological derivatives, AURA is another boundary-breaking model that challenges the norms of value while delivering all the detail, energy and thrill of your music collection with a class-leading performance but with a class-defying price tag

Wharfedale Aura CS Centre Speaker

The Aura CS is a 2-way centre speaker with 2 x  5" bass driver and centre-mounted ribbon tweeter. AURA is the latest innovation in the family of class-leading Wharfedale speakers. Taking inspiration from the flagship ELYSIAN series through fit, finish and technological derivatives, AURA is another boundary-breaking model that challenges the norms of value while delivering all the detail, energy and thrill of your music collection with a class-leading performance but with a class-defying price tag

Wharfedale Aura 4 Floorstanding Speakers

The flagship in the range, the Aura 4 is a 3-way floorstanding speaker with two 6.5" bass drivers along with a 4" midrange unit. AURA is the latest innovation in the family of class-leading Wharfedale speakers. Taking inspiration from the flagship ELYSIAN series through fit, finish and technological derivatives, AURA is another boundary-breaking model that challenges the norms of value while delivering all the detail, energy and thrill of your music collection with a class-leading performance but with a class-defying price tag

Wharfedale Aura 3 Floorstanding Speakers

The Aura 3 is a 3-way floorstanding speaker with two 5” bass drivers along with a midrange unit. AURA is the latest innovation in the family of class-leading Wharfedale speakers. Taking inspiration from the flagship ELYSIAN series through fit, finish and technological derivatives, AURA is another boundary-breaking model that challenges the norms of value while delivering all the detail, energy and thrill of your music collection with a class-leading performance but with a class-defying price tag

Wharfedale Aura 2 Speaker Stands

The Wharfedale AURA 2 Speaker Stands have been meticulously crafted to complement the AURA 2 loudspeaker, a remarkable addition to the renowned AURA series. With a height of 560mm (on plinth) and dimensions of 286mm x 352mm (with terminals), these stands have been precision-engineered from high-carbon stainless steel using laser-cut technology. Engineered to serve as the ideal foundation for the AURA 2 loudspeaker, these stands offer both stature and stability, effectively minimizing vibrations and resonance from the speaker’s cabinet. This isolation from the floor and surroundings significantly enhances the loudspeaker’s performance. AURA 2 Stands are designed to harmonize with the natural, wide bandwidth performance characteristic of AURA 2 speakers. Moreover, it serves as a piece of furniture that the owner can rightfully take pride in. Dimensions (H x W x D) mm: 560 (on plinth) x 286 x 352 with terminals

Wharfedale Aura 2 Standmount Speakers

The Aura 2 is a 2-way 100-watt capable, stand-mounted speaker with a 6.5" Bass and 4" Soft Dome Midrange driver. AURA is the latest innovation in the family of class-leading Wharfedale speakers. Taking inspiration from the flagship ELYSIAN series through fit, finish and technological derivatives, AURA is another boundary-breaking model that challenges the norms of value while delivering all the detail, energy and thrill of your music collection with a class-leading performance but with a class-defying price tag

Wharfedale Aura 1 Speaker Stands

The Wharfedale AURA 1 Speaker Stands have been meticulously crafted to complement the AURA 1 loudspeaker, a remarkable addition to the renowned AURA series. With a height of 386mm (on plinth) and dimensions of 246mm x 352mm (with terminals), these stands have been precision-engineered from high carbon stainless steel using laser-cut technology. Engineered to serve as the ideal foundation for the AURA 1 loudspeaker, these stands offer both stature and stability, effectively minimizing vibrations and resonance from the speaker’s cabinet. This isolation from the floor and surroundings significantly enhances the loudspeaker’s performance. AURA 1 Stands are designed to harmonize with the natural, wide bandwidth performance characteristic of AURA 1 speakers. Moreover, it serves as a piece of furniture that the owner can rightfully take pride in. Dimensions (H x W x D) mm: 386 (on plinth) x 246 x 352 with terminals

Wharfedale Aura 1 Standmount Speakers

The Aura 1 is a 3-way 150-watt capable, stand-mounted speaker with a 5" Bass driver. AURA is the latest innovation in the family of class-leading Wharfedale speakers. Taking inspiration from the flagship ELYSIAN series through fit, finish and technological derivatives, AURA is another boundary-breaking model that challenges the norms of value while delivering all the detail, energy and thrill of your music collection with a class-leading performance but with a class-defying price tag.

Advance Paris AIR 65 Active Speakers

The Advance Paris AIR 65 Connected speakers feature integrated Bluetooth, enabling effortless wireless device connections to phones and laptops. For additional fidelity the AIR 65s are also available with the optional WTX-MicroStream which allows for Wi-Fi connectivity for seamless audio streaming. Key Features: 1 x Optical and 1 x Coaxial Digital inputs. 2 x RCA Analog Input, 1 subwoofer output. Turntable ready with Phono MM (Moving Magnet) input. The speakers can be controlled via the included remote control, or if using the optional WTX-MicroStream via the Advance PlayStream app Optional WTX-MicroStream network adapter for WiFi streaming.

Rega Aya Floorstanding Speakers

Developed over ten years by a team of Rega designers headed up by our founder Roy Gandy, the AYA loudspeakers promise to deliver a detailed, balanced performance no matter which genre of music you decide to play. Using Rega designed, handmade drivers, coupled with our ZRR high frequency tweeter and a new crossover, our engineers have fine-tuned every aspect to deliver the best possible performance. The sculptured cabinets and stand create an attractive, floating effect which adds to the unique appearance. Key Features: Custom GRC cabinet (glass reinforced cement) Band pass cabinet design 2.5 way system Rega designed ZRR high frequency unit 5" Handmade MX-125 Bass mid driver 7" Handmade RR7.8 Bass driver *Optional loudspeaker grilles Lifetime warranty against manufacture defects

Quad Revela 1 Speaker Stands

The QUAD Revela stand is also custom designed in conjunction with QUAD’s Director of Acoustic Design, Peter Comeau. Every aspect is considered to create the perfect presentation of the Revela Bookshelf Speaker. Ideal complement for stand-mount / bookshelf speakers The Revela stand features Birch plywood piano finish columns, with a high carbon steel tube base plate and hardened high carbon steel base spikes.

Quad Revela 2 Floorstanding Speakers

Quad Revela 1 Standmount Speakers

Quad’s first new speakers for seven years, the Revela 1 standmount and Revela 2 floorstander deliver on the company’s promise of “the closest approach to the original sound” The Revela 1 is a standmount speaker with a two-way driver configuration and dimensions of 395x246x386mm (HxWxD). The Revela 2 is a three-way floorstander with the same cabinet width and depth (although the plinth is a little wider/deeper) and a height of 962mm. Both models are available in luxuriously lacquered black or walnut finish options, the latter featuring a striking combination of wood veneer interlinked with piano black.

PMC Prodigy5 Speaker Grille

Please note Speakers sold separately.  Optional Speaker Grille for PMC Prodigy 5 Floorstanding Speakers. 

PMC Prodigy1 Speaker Grille

Please note Speakers sold separately.  Optional Speaker Grille for PMC Prodigy 1 Standmount Speakers. 

Quad ESL 2912 Floorstanding Speakers

Quad's latest version of the highly acclaimed ESL series - the ESL-2812 and 2912 are a celebration of a classic. Using the signature mylar diaphraghm, yet while re-evaluating all circuitry and components, the result is an authentic ESL experience - incredible full range accuracy and startling realism.

Quad ESL 2812 Floorstanding Speakers

Quad's latest version of the highly acclaimed ESL series - the ESL-2812 and 2912 are a celebration of a classic. Using the signature mylar diaphraghm, yet while re-evaluating all circuitry and components, the result is an authentic ESL experience - incredible full range accuracy and startling realism.

PMC Prodigy5 Floorstanding Speakers

Please Note: Speaker grills available seperately. The prodigy5 floorstander is compact but powerful, taking up no more space than bookshelf speakers on stands thanks to a small footprint suited to any style of room – yet it can fill even larger spaces with weighty, crisply defined music.

PMC Prodigy1 Standmount Speakers

PMC's smaller prodigy loudspeaker is a supreme compact standmount/bookshelf design, ideal for small to medium-sized rooms, yet capable of a rich, dynamic sound from a diminutive form. Please Note: Speaker grilles available separately, stands not included.

IsoAcoustics Aperta Sub XL Stand

Measuring 14.5″ wide x 16″ deep (368x406mm) the new Aperta Sub XL brings the patented IsoAcoustics isolation technology to larger subwoofers of up to 160 lbs / 72.5 kg. Taming the power of such mighty speakers is no easy feat, but IsoAcoustics managed to build on the design of the Aperta Sub for smaller subwoofers to perfectly support heavier models.

Martin Logan Motion XT C100 Centre Channel Speaker

The optimal center channel for any Motion® XT or Motion®-based surround system. Featuring MartinLogan's latest Gen2 Folded Motion® XT Tweeter with advanced Folded Motion® Waveguide technology for ultimate dialogue clarity and consistency in every seat. The anti-lobing crossover design further increases accuracy, while the flippable cabinet provides a slight angle if desired, perfect for a low-mounted shelf or TV stand.

Martin Logan Motion XT B100 Standmount Speakers

MartinLogan's best bookshelf speaker, for those wanting maximum performance without moving to a tower speaker. The Gen2 Folded Motion® XT Tweeter and Nomex®-Reinforced Kevlar® woofer deliver exceptional clarity and precision, making B100 ideal for 2-channel or home theater setups. For those desiring a stand mount option, the B100 is threaded to securely attach to their matching STAND25 speaker stand (sold separately) for maximum stability.

Martin Logan Motion XT F100 Floorstanding Speakers

Experience exceptional sound quality with MartinLogan’s Gen2 Folded Motion® XT Tweeter featuring Folded Motion® Waveguide technology seamlessly integrated into an elegant front baffle design. The Nomex®-Reinforced Kevlar® midrange offers improved resonance reduction and clarity, while the triple 6.5” aluminum woofers provide powerful and dynamic bass. Stepping up to the XT series performance upgrades with triple bass drivers makes for a compelling option for those looking for a high-performance tower speaker. The Motion® XT F100 is sure to impress in any audio setup.

Martin Logan Motion XT F200 Floorstanding Speakers

The Motion® XT F200 is the flagship of the Motion® range, featuring the most advanced technologies. The high-output, low-distortion Gen2 Obsidian FMT XT and Folded Motion® Waveguide, seamlessly integrated with a Nomex®-Reinforced Kevlar® midrange and triple 8" aluminum bass drivers, create a truly unparalleled listening experience. The effortless, dynamic bass and stunning clarity, coupled with precise, accurate detail, make this speaker the ultimate choice for discerning audiophiles and professionals alike.

Martin Logan Motion MP10 Surround Speakers

Motion® MP10’s innovative shape and mounting system allows it to be used as a shallow depth bookshelf speaker or wall mounted using the included mounting bracket making it one of the most versatile speakers in the Motion® range. It can be mounted parallel to the wall surface or flipped upside down to angle downwards into the room, perfect for when installation above ear level is desired. MP10's Gen2 FMT and Folded Motion® Waveguide ensure that your listening area is blanketed in clear, detailed sound wherever you decide to install it. Please note: this item is sold as a pair of speakers

Martin Logan Motion C10 Centre Channel Speaker

The ideal compact Center Channel option to deliver crystal clear dialogue perfectly complimenting your Motion® home theater system. The angled flippable cabinet design of Motion® C10 allows the option to angle the speaker upwards towards the listener when it is mounted on a lower shelf, helping to improve dialogue clarity. Performance and practicality were top concerns for Motion® C10, so its relatively compact size makes it compatible with more furniture options than larger designs.

Martin Logan Motion B10 Standmount Speakers

Motion® B10 offers impressive performance from its Gen2 FMT and Woven Fiberglass mid-bass, delivering musicality and scale not typical of its size. Being less than 10" deep, the Motion® B10 is a practical option for placement on a shelf, desk, cabinet or other flat surface. For those desiring a stand mount solution, MartinLogan's optional (sold separately) STAND25 speaker stand can bolt directly into the bottom of the speaker for maximum stability.

Martin Logan Motion F20 Floorstanding Speakers

Motion® F20 offers excellent detail, clarity, and power in a non-imposing floorstanding package. With the incredible trifecta of the Gen2 FMT with a Woven Fiberglass midrange and dual 6.5" aluminum bass drivers, it is well equipped to take its place in any home theater or 2-channel setup. Offering more bass extension and dynamics than its smaller sibling, the Motion® F20 is the ideal sweet spot for those balancing both performance and size.

Martin Logan Motion F10 Floorstanding Speakers

While the Motion® F10 is the smallest floorstanding model in their assortment, it offers impressive levels of detail, clarity, and dynamics that defy the expectations of its compact design. With a height of under 39", the Motion® F10 can fit into almost any decor without being overbearing. With the combination of our Gen2 FMT, Woven Fiberglass midrange, and dual 5.5" aluminum bass drivers, Motion® F10 provides an engaging listening experience for all of your favourite content.

Atacama NeXXus 1000 CM Speaker Stands

Looking for speaker stands that both perform and offer the convenience of ample cable management? Then the Atacama NeXXus CM range could be exactly what you are looking for! Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 700 CM Speaker Stands

Looking for speaker stands that both perform and offer the convenience of ample cable management? Then the Atacama NeXXus CM range could be exactly what you are looking for! Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 600 CM Speaker Stands

Looking for speaker stands that both perform and offer the convenience of ample cable management? Then the Atacama NeXXus CM range could be exactly what you are looking for! Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 500 CM Speaker Stands

Looking for speaker stands that both perform and offer the convenience of ample cable management? Then the Atacama NeXXus CM range could be exactly what you are looking for! Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

McIntosh RS150 Wireless Speaker

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. The RS150 Wireless Loudspeaker is an easy-to-use wireless speaker, that while relatively compact, still delivers a larger-than-life home audio sound performance that McIntosh is known for. It is a stand-alone, complete wireless speaker solution that does not require any dedicated control app. Instead, it has a variety of built-in casting technologies such as Spotify® Connect, TIDAL® Connect, Apple® AirPlay® 2, Bluetooth®, Chromecast, and Roon Ready, letting you easily stream to the RS150 from your smart devices. Key Features: Easily add streaming music to any room Built-in casting: Spotify Connect, TIDAL Connect, Apple AirPlay 2, Bluetooth, Chromecast, Roon Ready Control playback directly from your favorite compatible streaming apps - no dedicated control app needed Power output doubled New, quick responding LED digital meter

McIntosh RS250 Wireless Speaker System

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. The RS250 Wireless Loudspeaker System is our most advanced and most powerful home audio wireless speaker system. Similar to the mono RS150 Wireless Loudspeaker, the stereo RS250 is a stand-alone, complete wireless speaker solution. Key Features: Easily add streaming music to any room Built-in casting: Spotify Connect, TIDAL Connect, Apple AirPlay 2, Bluetooth, Chromecast, Roon Ready Control playback directly from your favorite compatible streaming apps - no dedicated control app needed 650 Watts of total power New, quick responding LED digital meters

Magneplanar LRS+ Floorstanding Speakers

Following in the footsteps of the highly acclaimed LRS, the LRS+ takes it up a notch. Ribbon and electrostatic speakers are elegant and simple. The air is moved and sound waves are created by moving an ultra-light film or aluminium ribbon. Ultra-low mass enables the ribbon to respond quickly to the electrical signal from the amplifier. What you hear is higher definition. 

DALI KATCH G2 Bluetooth Speaker

The stunning DALI KATCH G2 sets fresh standards in portable audio. The embodiment of DALI's advanced digital technology and unique design knowledge, the KATCH G2 delivers incredibly rich sound from its elegant, compact form.

Mission 770 Standmount Speakers

The new 770 heralds the return of UK-based manufacturing for the Mission brand, where a 25,000 square foot production facility has been purpose-built in Huntingdon, Cambridgeshire – the home of British Hi-Fi. The Mission 770 has always been manufactured according to the Mission principles of quality and value for money. New Mission 770 further exemplifies these two edicts; balancing fine craftsmanship, natural sound quality, and affordability inside a beautifully proportioned loudspeaker that has been bought in its millions right across the globe through its various incarnations.

Mission 700 Standmount Speakers

Revisited as a sister model to the eagerly anticipated reintroduction of the Mission 770 – a model which heralded the return to UK manufacturing for the Mission brand; the Mission 700 takes what was referred to as an ‘industry benchmark, in the original 700 model, but utilises Mission’s 45 years of evolution and development in loudspeaker design. Led by Mission’s Director of Acoustic Design, Peter Comeau, the new Mission 700 bears a striking aesthetic resemblance to the original. However, there are many complex innovations and improvements that bring this revered model bang up to date.

Mission ZX-C1 Centre Channel Speaker

The ZX Series is the latest in a long line of distinguished and revered Mission loudspeakers and joins more recent Award winning products. The ZX series represents the most technologically advanced loudspeakers in the Mission family, with a distinct ID that will complement the finest electronics and décor. Mission ZX incorporates purpose designed bass driver cones, precision engineered motor systems, advanced treble units and more. As ever with Mission products; ‘Music leads, Technology Follows’. No compromise.

Mission LX-C2 MKII Centre Channel Speaker

LX-C2 MKII is a 2-way Centre speaker with two 5″ bass drivers and a 1″ softdome treble unit. The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail.

Mission LX-6 MKII Floorstanding Speakers

LX-6 MKII is a 3-way Floorstanding loudspeaker with two 6.5″ bass drivers, a 5″ midrange driver and a 1″ softdome treble unit. The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail.

Mission LX-C1 MKII Centre Channel Speaker

LX-C1 MKII is a 2-way Centre speaker with dual 4″ bass driver and a 1″ softdome treble unit. The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail.

Mission LX-5 MKII Floorstanding Speakers

LX-5 MKII is a 2-way Floorstanding loudspeaker with two 6.5″ bass drivers and a 1″ softdome treble unit. The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail.

Mission LX-4 MKII Floorstanding Speakers

LX-4 MKII is a 2-way Floorstanding loudspeaker with two 5″ bass drivers and a 1″ softdome treble unit. The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail.

Mission LX-3 MKII Standmount Speakers

LX-3 MKII is a 2-way standmount loudspeaker with a 6.5″ bass driver and a 1″ softdome treble unit. The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail.

Mission LX-2 MKII Standmount Speakers

LX-2 MKII is a 2-way standmount loudspeaker with a 5″ bass driver and a 1″ softdome treble unit. The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail.

Mission LX-1 MKII Standmount Speakers

LX-1 MKII is a 2-way standmount loudspeaker with a 4″ bass driver and 1″ softdome treble unit. The LX MKII Series is the latest in a long line of distinguished Mission loudspeakers, joining the multi-award winning speakers from the mid-level QX Series and the flagship ZX Series. LX MKII maintains the Mission trademark ‘Inverted Driver Geometry’ design, which means the path length between the drivers is optimised. Unique at this price-point, this arrangement allows the precision-tuned crossover to yield improved transient attack and astonishing detail.

Atacama Moseco CC03 Speaker Stand

The Moseco CC03 has a Top Plate size of 550mm (21.65") wide, 250mm (9.8") deep. If a smaller top plate is required, please refer to the CC01 and CC02 versions. There are five height options available ranging from 215mm to 615mm (excluding floor spikes), so allowing you to optimize the position of your centre channel speaker.

Atacama Moseco CC02 Speaker Stand

The Moseco CC02 has a Top Plate size of 475mm (18.7") wide, 210mm (8.3") deep. If a smaller or larger top plate is required, please refer to the CC01 and CC03 versions. There are five height options available ranging from 215mm to 615mm (excluding floor spikes), so allowing you to optimize the position of your centre channel speaker.

DALI SUB K-14 F Subwoofer

Whether you want fill a room with full-bodied stereo music or feel the epic low frequency effects of a blockbuster movie, the DALI SUB K-14 F delivers. Built around a rigid 14" aluminium woofer, the SUB K-14 F adds subtlety and punch in equal measures.

DALI SUB E-12 F Subwoofer

The DALI SUB E-12 F is a powerful, well-balanced subwoofer with excellent bass reproduction. Featuring a 12" aluminium woofer for maximum rigidity, the SUB E-12 F flawlessly integrates with any stereo or multi-channel system.

DALI SUB E-9 F Subwoofer

The DALI SUB E-9 F subwoofer redefines what's possible at this price level. Featuring a 9" woofer made from pure aluminium, the SUB E-9 F can move lots of air with power and precision to deliver a highly dynamic performance in a stylish cabinet.

DALI SUB C-8 D Subwoofer

The DALI SUB C-8 D subwoofer has been engineered to perform equally well with both music and movies. Featuring a powerful, detailed 8" down-firing woofer, the SUB C-8 D is anything but a boombox.

DALI OPTICON VOKAL MK2 Centre Channel Speaker

The OPTICON 2 MK2 is a mid-sized stand mount speaker for compact to medium size listening spaces where it has room to breathe and deliver its dynamic and explicitly defined performance.

DALI OPTICON 8 MK2 Floorstanding Speakers

The powerhouse of the OPTICON MK2 family for large listening spaces, combining immense low-frequency bandwidth, volume potential and dynamic accuracy with the extraordinary detail and clarity from the dedicated midrange driver.

DALI OPTICON 6 MK2 Floorstanding Speakers

The slim, floorstanding OPTICON 6 MK2 is the entry point in the OPTICON MK2 series for the renowned DALI hybrid soft dome and ribbon tweeter. Assembled at their own factory in Denmark.

DALI OPTICON 2 MK2 Standmount Speakers

The OPTICON 2 MK2 is a mid-sized stand mount speaker for compact to medium size listening spaces where it has room to breathe and deliver its dynamic and explicitly defined performance.

DALI OPTICON 1 MK2 Standmount Speakers

The OPTICON 1 MK2 is a compact stand mount speaker delivers remarkable bass performance for its size that integrates perfectly with the inherent midrange and high frequency quality of its drivers.

DALI MENUET SE Standmount Speakers

Save £200 on the Dali Menuet SE. Special offer Price Ends 1st July 2025, whilst stocks last. The DALI MENUET SE is a special edition of Dali's compact MENUET speaker. For the SE, they've applied everything we know to further improve the sound quality and to create a fantastic new finish.

DALI MENUET Standmount Speakers

A small, powerful loudspeaker with great musicality that sets new standards for sound and performance from a compact speaker.

DALI KORE Floorstanding Speakers

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. The DALI KORE is the best speaker they've ever created. It's the culmination of everything Dali have learned in four decades of loudspeaker design and manufacturing in one outstanding loudspeaker.

Atacama M8 Carpet Spikes C/W Lock Nuts - Silver

Bright Zinc Plated 8mm diameter Replacement carpet spikes and lock nuts. Please Note: Supplied as a pack of 8. Overall length 40mm, thread length 15mm,spike length 15mm, grip 10mm. Thread pitch 1.25.

Atacama M6 Carpet Spikes C/W Lock Nuts - Silver

Bright Zinc Plated 6mm diameter Replacement carpet spikes and lock nuts. Please Note: Supplied as a pack of 8. Overall length 30mm, thread length 15mm, spike length 10mm, grip lenght 5mm. Thread pitch 1.00.

Van den Hul The Extender

Listening to reproduced sound by any loudspeaker system in all kind of listening situations, made clear that in the sound reproduction something essential was missing. That was the feeling to be really physical in the concert hall or jazz café. The creation of The Extender was based on the search to find this “lost” live experience in any sound reproduction. However, The Extender produces no sound and is also not a supertweeter. You cannot measure or hear any sound coming from The Extender. The Extender emits a signal which communicates direct with the brain. Limited loudspeakers performance, coloured acoustics or even some ear defects are hereby bridged. These acoustical limitations in the sound reproduction do therefore play no essential role anymore. The sonic effect, after connecting The Extenders, is that the reproduced sound has suddenly natural space Depth, a very high definition and an easy listening.

Wharfedale Linton Speaker Stands

The custom-engineered LINTON STAND offers optimum positioning and mounting for the LINTON speaker. Perfectly crafted with matching wood veneer finish, to match the LINTON cabinet, the LINTON STAND supports the size and weight of the cabinet, while presenting the listening axis perfectly to the seated user. Precise – perfected to a fraction of a millimeter measurement, the LINTON stand is precision manufactured.

Atacama NeXXus 1000 Pro Studio Speaker Stands

The top of the range NeXXus Pro Studio version of the Award Winning* NeXXus Series speaker stands are perfect for professional use or for home hifi speaker support where only the best will do! Featuring twin 76.2mm (3”) tubes, they offer maximum mass loading potential for high end professional grade studio speakers. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 700 Pro Studio Speaker Stands

The top of the range NeXXus Pro Studio version of the Award Winning* NeXXus Series speaker stands are perfect for professional use or for home hifi speaker support where only the best will do! Featuring twin 76.2mm (3”) tubes, they offer maximum mass loading potential for high end professional grade studio speakers. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 600 Pro Studio Speaker Stands

The top of the range NeXXus Pro Studio version of the Award Winning* NeXXus Series speaker stands are perfect for professional use or for home hifi speaker support where only the best will do! Featuring twin 76.2mm (3”) tubes, they offer maximum mass loading potential for high end professional grade studio speakers. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 500 Pro Studio Speaker Stands

The top of the range NeXXus Pro Studio version of the Award Winning* NeXXus Series speaker stands are perfect for professional use or for home hifi speaker support where only the best will do! Featuring twin 76.2mm (3”) tubes, they offer maximum mass loading potential for high end professional grade studio speakers. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 400 Pro Studio Speaker Stands

The top of the range NeXXus Pro Studio version of the Award Winning* NeXXus Series speaker stands are perfect for professional use or for home hifi speaker support where only the best will do! Featuring twin 76.2mm (3”) tubes, they offer maximum mass loading potential for high end professional grade studio speakers. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 300 Pro Studio Speaker Stands

The top of the range NeXXus Pro Studio version of the Award Winning* NeXXus Series speaker stands are perfect for professional use or for home hifi speaker support where only the best will do! Featuring twin 76.2mm (3”) tubes, they offer maximum mass loading potential for high end professional grade studio speakers. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 200 Pro Studio Speaker Stands

The top of the range NeXXus Pro Studio version of the Award Winning* NeXXus Series speaker stands are perfect for professional use or for home hifi speaker support where only the best will do! Featuring twin 76.2mm (3”) tubes, they offer maximum mass loading potential for high end professional grade studio speakers. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 1000 HiFi Audio Speaker Stands

Designed to support mid to high end speakers, The NeXXus HiFi Audio version of the Award Winning NeXXus Series speaker stands features 76.2mm (3”) front tubes, replacing the 50.8mm (2”) front tubes used on the Essential version.   Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 700 HiFi Audio Speaker Stands

Designed to support mid to high end speakers, The NeXXus HiFi Audio version of the Award Winning NeXXus Series speaker stands features 76.2mm (3”) front tubes, replacing the 50.8mm (2”) front tubes used on the Essential version.   Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 600 HiFi Audio Speaker Stands

Designed to support mid to high end speakers, The NeXXus HiFi Audio version of the Award Winning NeXXus Series speaker stands features 76.2mm (3”) front tubes, replacing the 50.8mm (2”) front tubes used on the Essential version.   Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 500 HiFi Audio Speaker Stands

Designed to support mid to high end speakers, The NeXXus HiFi Audio version of the Award Winning NeXXus Series speaker stands features 76.2mm (3”) front tubes, replacing the 50.8mm (2”) front tubes used on the Essential version.   Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 400 HiFi Audio Speaker Stands

Designed to support mid to high end speakers, The NeXXus HiFi Audio version of the Award Winning NeXXus Series speaker stands features 76.2mm (3”) front tubes, replacing the 50.8mm (2”) front tubes used on the Essential version.   Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 300 HiFi Audio Speaker Stands

Designed to support mid to high end speakers, The NeXXus HiFi Audio version of the Award Winning NeXXus Series speaker stands features 76.2mm (3”) front tubes, replacing the 50.8mm (2”) front tubes used on the Essential version.   Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 200 HiFi Audio Speaker Stands

Designed to support mid to high end speakers, The NeXXus HiFi Audio version of the Award Winning NeXXus Series speaker stands features 76.2mm (3”) front tubes, replacing the 50.8mm (2”) front tubes used on the Essential version.   Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 1000 Essential Speaker Stands

Introducing the Award Winning NeXXus 1000 Essential Speaker Stands available in Satin Black or as a cost option, Diamond White finish. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 700 Essential Speaker Stands

Introducing the Award Winning NeXXus 700 Essential Speaker Stands available in Satin Black or as a cost option, Diamond White finish. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 600 Essential Speaker Stands

Introducing the Award Winning NeXXus 600 Essential Speaker Stands available in Satin Black or as a cost option, Diamond White finish. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 500 Essential Speaker Stands

Introducing the Award Winning NeXXus 500 Essential Speaker Stands available in Satin Black or as a cost option, Diamond White finish. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 400 Essential Speaker Stands

Introducing the Award Winning NeXXus 400 Essential Speaker Stands available in Satin Black or as a cost option, Diamond White finish. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 300 Essential Speaker Stands

Introducing the Award Winning NeXXus 300 Essential Speaker Stands available in Satin Black or as a cost option, Diamond White finish. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Atacama NeXXus 200 Essential Speaker Stands

Introducing the Award Winning NeXXus 200 Essential Speaker Stands available in Satin Black or as a cost option, Diamond White finish. Please Note: The 130mm x 170mm top plate pack is always included with NeXXus. If you have selected one of the upgraded top plate packs, it is suggested that the unused top plates are repurposed by attaching them to the underneath of the base plates via the tube fastening bolts.

Scansonic M Centre Centre Channel Speaker

Scansonic Center for Home theatre system. The new M Center is a high-performance speaker designed to match a complete M series setup in a home Cinema system It uses two Mid/woofer 4,5” honeycomb enforced glass fiber cone and sealed Ribbon-tweeter, in combination with the woofers, allows for an open and detailed sound. Scansonic M Center in matt Black or White (Included wall-brackets).

Scansonic L8 Active Subwoofer

The ideal match for a L-series home cinema or a bang for the buck 2.1 stereo system. The compact subwoofer is based on a class A/B amplifier with 80 watts RMS. The class A/B amplifier adds to musicality and a warmer signature sound.

Scansonic L6 Centre Speaker

The L-6 is designed to match the L-series and shares the same core technology with a 25 mm soft dome tweeter in combination with two 4,5” bas/midrange drivers. The slim enclosure allows for easy placement in a home cinema setup where space is limited, but without compromising sound quality.

Scansonic L12 Floorstanding Speakers

The L-12 is the big brother in series. It follows the same lines as the rest of the series and carries the same elegant look. L-12 is a 3-way design using four 4,5” woofers, with one handling the midrange area and the remaining drivers delivering the low range frequencies.

Scansonic L9 Floorstanding Speakers

The L-9 is the smallest of the floorstanders, and the sleek and stylish design matches the L-series. It is a 3-way design using three 4,5” drivers where one serves as a midrange driver and the other two delivers the low range frequencies.

Scansonic L5 Standmount Speakers

The L-5 is a small, elegant bookshelf model with a 25 mm soft dome tweeter and a 4,5” bas/midrange driver. Despite the size, the L-5 delivers convincing sound, and the size is perfect for placement on furniture or shelves.

Sonus Faber Maxima Amator Floorstanding Loudspeaker System

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. As the third member of the Heritage family, Sonus Faber pay homage to their Italian roots and to the artisans as well as the people who are responsible for developing Sonus faber products. Completely Made in Italy, Maxima Amator is a project started many years ago and abandoned because considered impossible. Today, they achieve that dream: a two-way floor stander concept applied to a solid wood cabinet.

Sonus Faber Lumina CI Centre Channel Speaker

Lumina collection is the new Sonus faber line conceived on the notion that it is important to savor time for ourselves and celebrate life’s precious moments. In today’s world, we have come to fully appreciate our living spaces where these moments come to life.   Sonus faber's commitment is to deliver a luxury music experience in all Sonus faber homes, which is facilitated through our longstanding tradition of refined materials and careful craftsmanship.

Sonus Faber Lumina II Standmount Speakers

Lumina collection is the new Sonus faber line conceived on the notion that it is important to savor time for ourselves and celebrate life’s precious moments. In today’s world, we have come to fully appreciate our living spaces where these moments come to life.   Sonus faber's commitment is to deliver a luxury music experience in all Sonus faber homes, which is facilitated through our longstanding tradition of refined materials and careful craftsmanship.

Sonus Faber Lumina V Floorstanding Speakers

The Lumina collection by Sonus faber presents an exciting change, new to the typical Sonus faber product design portfolio but still able to embody the history and values of the brand. “Simplicity” is central to the collection’s identity that aims to reach a wide audience and to deliver a luxury music experience in all Sonus faber homes, which is facilitated through a longstanding tradition of refined materials and careful craftsmanship.

Atacama Speaker Stand Isolation Gel Pads

Designed to adhere to speaker stand top plates and are made from a high performance polyurethane elastomer which, as well as being non-slip and non scratch, gives excellent sound and vibration resistance.

Atacama HD-L Spike Shoes

Atacama High Density spike shoes are supplied in packs of 4 and are made of a copper/zinc alloy construction. Each shoe features a location hole on the upper surface and is supplied with a non-slip E.P.D.M. elastomer membrane pad. This pad has been designed to act as a buffer between the spike shoe and the floor so giving additional protection to delicate floor coverings. Please Note: Two sizes of shoe are available, HD-L (High Density-Large) and HD-S (High Density-Small).

Atacama HD-S Spike Shoes

Atacama High Density spike shoes are supplied in packs of 4 and are made of a copper/zinc alloy construction. Each shoe features a location hole on the upper surface and is supplied with a non-slip E.P.D.M. elastomer membrane pad. This pad has been designed to act as a buffer between the spike shoe and the floor so giving additional protection to delicate floor coverings. Please Note: Two sizes of shoe are available, HD-S (High Density-Small) and HD-L (High Density-Large).

Atacama NeXXus Top Plate Pack

If you are looking to own a pair of the Award winning Atacama Moseco Series or the new NeXXus series speaker stands but are finding that the standard 130mm x 170mm top plates are too small for your requirements, Atacama now offers Top Plate packs for when larger bookshelf style speakers need to be accommodated. Please Note: Each pack consists of two top plates. Only one pack is required per pair of speaker stands.

Rega Kyte Stand Adaptor

Custom designed for the Kyte loudspeaker to allow mounting on a wide variety of loudspeaker stands. Contents: 2 x Adaptors 4 x damping feet (factory fitted top mount) for correct axis alignment of loudspeaker 4 x mounting screws 8 x rubber optional base feet (to be customer fitted depending on the size of the stand used.

IsoAcoustics Aperta Sub Stand

Thanks to their larger speaker drivers, HiFi subwoofers create a large amount of energy which often runs the risk of exciting the underlying surface of the speaker cabinet. This physical transfer of energy can have numerous side effects from bass smear and interference with other audio components to cabinet rattle and even neighbour disturbance. Key Features: Decouples subwoofers from supporting surfaces Improves clarity and definition Unique sculpted aluminium frame Low profile 33mm-high design Directional logo-forward orientation Ships with 4x carpet discs included

Rega Kyte Standmount Speakers

Become immersed in the stunningly natural sound of the Kyte loudspeakers, designed to deliver the true Rega sound at an affordable price. Using our own ZRR high frequency unit and a handmade pair of MX-125 bass-mid drivers, this compact bookshelf speaker is designed to complement any hi-fi or audio system. Key Features: Custom designed phenolic resin cabinets Unique ceramic plate & cross brace construction Handmade MX-125 bass-mid unit Rega designed ZRR high frequency unit Bass reflex design, rear ported UK designed and manufactured Lifetime warranty against manufacture defects

Sonus Faber Wireless Transmitter for Gravis V & VI Subwoofers

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Designed by Sonus faber to transmit the signal in wireless mode to Gravis V & VI subwoofers, with maximum versatility and discretion.

Sonus Faber Gravis III Active Subwoofer

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above.   Sonus faber is not new to the arena of subwoofer design and engineering. The first subwoofer project, the Gravis FB100, was launched back in 1986, ten years later was born Sonus faber Cremona M. Today, with the new Gravis Collection, Sonus faber returns to its roots, merging a ever increasing cutting-edge technology while maintaining its identity of natural sound and quality Italian hand-craftsmanship.   The Gravis III, V and VI subwoofers, the most powerful and high-end models of the active systems line, have been designed to be the perfect complement to all the loudspeakers collections that marked the history of Sonus faber. Aesthetically connected by the body enriched by a black leather covering, they differ from each other by the finishes of the hand-finished wooden top.

Sonus Faber Lumina III Floorstanding Speakers

Lumina collection is the new Sonus faber line conceived on the notion that it is important to savour time for ourselves and celebrate life’s precious moments. In today’s world, we have come to fully appreciate our living spaces where these moments come to life.   Sonus faber's commitment is to deliver a luxury music experience in all Sonus faber homes, which is facilitated through their longstanding tradition of refined materials and careful craftsmanship.

Sonus Faber Lumina I Standmount Speakers

Lumina collection is the new Sonus faber line conceived on the notion that it is important to savor time for ourselves and celebrate life’s precious moments. In today’s world, we have come to fully appreciate our living spaces where these moments come to life.   Sonus faber's commitment is to deliver a luxury music experience in all Sonus faber homes, which is facilitated through our longstanding tradition of refined materials and careful craftsmanship.

Wharfedale Vista 200S Soundbar and Wireless Subwoofer System

The Vista 200 delivers a significant sonic upgrade despite its low-profile design and thoroughly modest price tag. Just 90cm in length and only 6.2cm high, its long and slender form sits unobtrusively beneath the screen without spoiling even the most stylish TV aesthetic. Placed on a TV stand or mounted on a wall, its smart, gloss-black finish always looks the part. Nestling behind the metal speaker grille is a pair of high-quality dynamic driver assemblies, positioned at either end of the soundbar’s length to ensure spacious stereo sound and augmented by two reflex ports to aid bass response. These drivers are powered by 2x30W stereo amplification, producing a sound that is crisply detailed yet tonally rich – a powerful, highly intelligible delivery that ensures voices are clear, sound effects are impactful, and music is full-bodied and engaging. In addition, three equaliser settings labelled ‘Movie’, ‘Music’ and ‘News’ provide a degree of sonic tailoring to suit whatever the user is watching or listening to.

Wharfedale Vista 200 Soundbar

The Vista 200 delivers a significant sonic upgrade despite its low-profile design and thoroughly modest price tag. Just 90cm in length and only 6.2cm high, its long and slender form sits unobtrusively beneath the screen without spoiling even the most stylish TV aesthetic. Placed on a TV stand or mounted on a wall, its smart, gloss-black finish always looks the part. Nestling behind the metal speaker grille is a pair of high-quality dynamic driver assemblies, positioned at either end of the soundbar’s length to ensure spacious stereo sound and augmented by two reflex ports to aid bass response. These drivers are powered by 2x30W stereo amplification, producing a sound that is crisply detailed yet tonally rich – a powerful, highly intelligible delivery that ensures voices are clear, sound effects are impactful, and music is full-bodied and engaging. In addition, three equaliser settings labelled ‘Movie’, ‘Music’ and ‘News’ provide a degree of sonic tailoring to suit whatever the user is watching or listening to.

Wharfedale SW12 Subwoofer

The SW series of subwoofers offer a level of performance previously unheard of in their class. Revolutionary drive units, amplifier modules and filter stages feature on every model. They strike the perfect balance between power and sound quality, offering remarkable sound pressure levels, yet retaining enough control to be considered audiophile in quality.   The new range of SW subwoofers comes with a host of new features. They now come with Non-pressed paper cones for increase self-damping, improved transient impact and intern increased the structural rigidity of the cone itself. The centre vents are copper lined to reduce the magnetic distortion and improve the heat dissipation.

Sonus Faber Electa Amator III Standmount Speakers

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Tradition, Expertise, Evolution. The fil rouge that lead us so far. The taste for Beauty. What pushed us beyond. 2018 marks the 35th anniversary for Sonus faber. Electa Amator III is the celebration of this milestone by appreciating the ongoing commitment to constantly evolving while drawing inspiration from the past. It's a gem of Italian expertise and craftsmanship: a small but precious speaker that inherits the characteristics of Electa Amator (1987) and Electa Amator II (1997), two of their models that contributed most to the international success of the heritage brand.

Sonus Faber Gravis VI Active Subwoofer

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above.   Strength and Design at the highest level.   Sonus faber is not new to the arena of subwoofer design and engineering. The first subwoofer project, the Gravis FB100, was launched back in 1986, ten years later was born Sonus faber Cremona M. Today, with the new Gravis Collection, Sonus faber returns to its roots, merging a ever increasing cutting-edge technology while maintaining its identity of natural sound and quality Italian hand-craftsmanship.

Sonus Faber Gravis V Active Subwoofer

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above.   Strength and Design at the highest level.   Sonus faber is not new to the arena of subwoofer design and engineering. The first subwoofer project, the Gravis FB100, was launched back in 1986, ten years later was born Sonus faber Cremona M. Today, with the new Gravis Collection, Sonus faber returns to its roots, merging a ever increasing cutting-edge technology while maintaining its identity of natural sound and quality Italian hand-craftsmanship.

Sonus Faber Gravis II Active Subwoofer

The Gravis II subwoofer, representing an ideal compromise between size and performance.   Sonus faber is not new to the arena of subwoofer design and engineering. The first subwoofer project, the Gravis FB100, was launched back in 1986, later followed Cremona M subwoofers. Today, with the new Gravis collection, Sonus faber returns to its roots, incorporating cutting-edge technology while maintaining its identity of natural sound and quality Italian hand-craftsmanship. Please Note: The Gravis II is the larger subwoofer on the left hand side of the picture.

Sonus Faber Gravis I Active Subwoofer

The Gravis I subwoofer, representing an ideal compromise between size and performance.   Sonus faber is not new to the arena of subwoofer design and engineering. The first subwoofer project, the Gravis FB100, was launched back in 1986, later followed Cremona M subwoofers. Today, with the new Gravis collection, Sonus faber returns to its roots, incorporating cutting-edge technology while maintaining its identity of natural sound and quality Italian hand-craftsmanship. Please Note: The Gravis I is the smaller subwoofer on the right hand side of the picture.

IsoAcoustics GAIA Focal Sopra Vanity Caps

Specifically for owners of GAIA isolation feet and Focal Sopra floorstanding loudspeakers, IsoAcoustics introduce an optional cap set to obscure the metal thread tops for a more pleasing presentational aesthetic when the two products are combined.

IsoAcoustics GAIA TITAN Carpet Discs

Designed to maintain stable support on carpet, the optional Carpet Spikes work with the GAIA TTIAN isolators to provide improved performance on thicker pile carpet and carpet with under pads.

IsoAcoustics GAIA TITAN Series Threaded Isolation Feet

The GAIA Titan range offers unparalleled isolation and decoupling technology to premium-end floor standing Hi-Fi loudspeakers. Utilising the same technology as the smaller GAIA range, GAIA Titans raise speakers up to attenuate inward reflections from their underlying surface and avoid incorrect information being centred - a phenomenon known as smear which causes a soundstage to collapse. The directional nature of the GAIA Titan’s internal design also resists lateral movement and ensures the listening position of the speaker remains constant while playback is in progress.

IsoAcoustics F1 Jack Tool for GAIA Installation

The F1 Jack is a tool specifically designed to aid the installation of IsoAcoustics screw-in Hi-Fi speaker isolators such as the GAIA and GAIA TITAN ranges. Please Note: It is always advisable to seek assistance in steadying speakers whilst installing.

IsoAcoustics GAIA Carpet Discs

Designed to maintain stable support on carpet, the optional Carpet Spikes work with the GAIA isolators to provide improved performance on thicker pile carpet and carpet with under pads.

IsoAcoustics GAIA I B&W D3 Square Adaptor Plates

The B&W D3 plate adaptor replaces the wheels on B&W D3 speakers and provides a threaded hole for the appropriate GAIA stud to screw into.

IsoAcoustics GAIA I B&W Round Adaptor Plates

The B&W plate adapts the GAIA I to the Bowers & Wilkins Nautilus and Diamond series speakers. The ball-casters are removed and replaced with the B&W plate which provides a threaded hole for the appropriate stud to screw into.

IsoAcoustics GAIA III Threaded Isolation Feet

Crafted with the vision of providing extraordinary acoustic performance, the GAIA III is the union of aesthetic visual design and acoustic engineering. The small compact design delivers unbelievable acoustic isolation that will bring out clarity and openness from your speaker like you’ve never heard.

IsoAcoustics GAIA II Threaded Isolation Feet

GAIA II is designed for floor standing speakers and subwoofers weighing up to 120 lbs (54Kg). Finished in an elegant machined dark chrome metal housing, the GAIA II incorporates IsoAcoustics’ patented design principles to deliver extraordinary acoustic results. GAIA II provides a high degree of isolation while resisting lateral movement and oscillations to maintain alignment with the listening position. Internal reflections from the hard-supporting surface are attenuated resulting in greater sound clarity and openness.

IsoAcoustics GAIA I Threaded Isolation Feet

GAIA I isolators are finished with a machined stainless steel housing with an elegant dark chrome finish. Incorporating IsoAcoustics patented design principles, the GAIA I provides a high degree of isolation while resisting lateral movement and oscillations to maintain alignment with the listening position. Internal reflections from the hard-supporting surface are attenuated resulting in greater sound clarity and openness. The GAIA I will reveal clarity and openness from your speakers like you’ve never heard.

IsoAcoustics Aperta 300 Speaker Stands

The Aperta 300, the next member of the acclaimed Aperta series, takes isolation and sound clarity to a new level. Featuring its signature stylized open design and low profile (3.0 inches), the Aperta 300 offers speakers a low stance while enhancing their clarity and performance. The stand’s unique tilt adjustment feature enables the user to dial in the optimum tilt angle, with fine gradation markings provided to match precise angle adjustments on each side. Please note: This is for a single unit, not a pair.

IsoAcoustics Aperta 200 Speaker Stands

Sculpted aluminum acoustic isolation stands designed especially for high end bookshelf, desktop speakers and studio monitors. The Aperta 200’s solid aluminum frame and isolator construction has an overall size of 7.8”x10” (200x254mm) and is designed to support large speakers weighing up to 75 lbs. The stand features a low profile (3.5 inches), enabling speakers to have a low stance while enhancing their clarity and performance. The stands’ unique tilt adjustment enables the user to set the optimum tilt angle, with fine gradation markings provided to ensure precise angle adjustments.

IsoAcoustics Aperta 155 Speaker Stands

Aperta, the stylish and sleek new line of sculpted aluminum acoustic isolation stands designed for medium-sized professional studio monitors and speakers. The artistically designed Aperta stands raise the bar to set a new standard for remarkable acoustic isolation and performance. As with all IsoAcoustics award-winning isolation stands, Aperta provides an aesthetically pleasing and cost-effective means to markedly enhance the sound clarity and transparency of medium sized speakers, using the patented “floating design” that this company has become famous for.

PMC Twenty5 Sub Subwoofer

Whether you’re savouring your favourite music or movie, the slender twenty5.sub, with its elegant Diamond Black finish, fits discreetly into any room and completes the audiophile experience. This combination of active electronics from PMC’s renowned professional systems, PMC's 400W Class-D ultra-low-distortion amplifiers, proprietary ATL™ and new Laminair™ technologies, and potent 6.5-inch high-excursion bass units, can faithfully reproduce frequencies down to 22Hz, and handle dynamic contrasts from the sonic complexity of a Hollywood blockbuster soundtrack to the filigree detail in a chamber music solo, with maximum resolution and precision-timed bass.

PMC Twenty5 26i Floorstanding Speakers

PMC is respected worldwide for its soft-dome mid-range drivers, and the flagship twenty5.26i, the largest in the range, features a third driver dedicated to the all-important mid frequencies, where the critical detail is to be found in vocal recordings. The three-way design ensures that each important frequency range has its own dedicated driver, so that the speaker can fill even the largest spaces with absolute transparency and clarity. This is a sublime speaker that can expand with you as you upgrade your system, and bring out the very best in whatever equipment you connect it to.

PMC Twenty5 24i Floorstanding Speakers

The largest two-way speaker in the range, the twenty5.24i delivers compelling life-like performances with realism, precision, bite and power. Even in medium-to-large listening rooms, its seamlessly integrated drivers and ATL™ saturate the space with music, giving you a hi-fidelity experience like no other in a slender and graceful cabinet design that will delight your senses without dominating your room. With the grilles in place, the twenty5.24i produces a sound that many could mistake for that of a three-way speaker.

PMC Twenty5 23i Floorstanding Speakers

The 23 has proved to be the most popular model in the twenty and twenty5 range of speakers, and the twenty5.23i  looks set to follow their success. Its discreet and elegant floor-standing form is perfect for filling medium-sized rooms with transparent, authentic dynamics and effortlessly extended bass, and it will blend unobtrusively into any room, whether your chosen décor is modern or traditional. As with all of the twenty5i range, it will make the best of even affordable source electronics, and, coupled with high-end amplification, will truly excel.

PMC Twenty5 22i Standmount Speakers

The more substantial twenty5.22i is designed for use in larger spaces than the 21, and is equally at home on its dedicated stands, console furniture or other flat surfaces. Its still-trim dimensions belie the lengthy ATL™ concealed inside, which, coupled with the powerful 6.5-inch g-weave bass driver and Laminair™ vent, allow it to deliver a clean, uncluttered and powerful low-end, together with detailed highs from the newly designed soft-dome treble unit. Despite its increased size, its performance is agile and full of dynamism.

PMC Twenty5 21i Standmount Speakers

Although the twenty5.21i is the most compact model in the new range, there’s nothing small about the sound, which has the impact you’d expect from a much larger cabinet, thanks to PMC’s Advanced Transmission Line technology. The speaker is ideal for use in small-to-medium listening environments where space is at a premium, but where you still want detailed bass, ultra-realistic mids and delicate highs with maximum musicality. Equally happy mounted on a stand or a bookshelf, the twenty5.21i offers maximum flexibility for placement, and also makes an excellent choice for effects speakers in an immersive sound system. 

Martin Logan Motion SLM XL On-Wall Speakers

The slender Motion® SLM XL speakers features an advanced resolution Folded Motion tweeter, two 4-inch high-excursion fiber cone woofers and four passive bass radiators for maximum controlled low-end bass extension - all in an ultra-slim profile designed expressly for super-thin 65-inch or larger TVs. Please note: this item is sold as a pair of speakers

Martin Logan ElectroMotion ESL X Floorstanding Speakers

The ElectroMotion ESL X features a new larger XStat™ electrostatic transducer, with a radiating area over 50in2 larger than the EM-ESL model. Twin 8-inch high-excursion woofers are housed in a non-resonant asymmetrical bass reflex (ported) chamber, in a surprisingly compact enclosure. Woofers have custom engineered high-rigidity paper cones, with extended-throw driver assemblies.

Martin Logan Classic ESL 9 Floorstanding Speakers

MartinLogan unveils the Classic ESL 9, its newest modern Masterpiece. All the familiar elements of MartinLogan’s flagship ESL series are here, with some revolutionary refinements. The heart of this exceptional loudspeaker is its 9.2-inch-wide Curvilinear Line Source (CLS) XStat vacuum-bonded electrostatic transducer. Advanced MicroPerf stator technology reveals more of the diaphragm surface area than any other electrostatic panel in this size class, efficiently increasing the narrow panel’s output. Ultra-rigid AirFrame Blade construction reduces performance-robbing vibrations, its shape creating an expressive alignment with the woofer cabinet. Deep bass is rendered with unflinching accuracy and authority by dual 8-inch low-distortion, high-excursion aluminum cone woofers in a beautifully sculpted enclosure.

Martin Logan Impression ESL 11A Floorstanding Speakers

The Impression ESL 11A is part of the Masterpiece Series. It features a dual 8-inch woofer system, with ARC-honed performance, for a perfectly blended low-frequency response. The groundbreaking integration of this woofer array and MartinLogan’s signature 11-inch wide XStat CLS transducer, coupled with a powerful dual amplifier section, delivers an expressive and dynamic audio experience. It's an experience of pure audio pleasure.   Please Note: A custom finish can be ordered. Contact us for further information.

Martin Logan Expression ESL 13A Floorstanding Speakers

The Expression ESL 13A is part of the Masterpiece Series. It features a dual 10-inch woofer system with ARC-honed performance, for perfectly blended low-frequency response. The groundbreaking integration of this woofer array with MartinLogan’s signature 13-inch wide XStat CLS Transducer, coupled with a powerful dual amplifier section, delivers an expressive and dynamic audio experience, with less coloration. It reveals the pure emotional impact of your audio.   Please Note: A custom finish can be ordered. Contact us for further information.

Martin Logan Renaissance ESL 15A Floorstanding Speakers

For MartinLogan, the essential truth revealed by their skill and artistry is audio realism. Fittingly, the next generation of electrostatic loudspeakers debuts with the new Renaissance ESL 15A. Three decades of audio design and engineering innovation, distilled into a startling fresh loudspeaker ideal.   Please Note: A custom finish can be ordered. Contact us for further information.

Wharfedale Diamond A2 Active Bluetooth Floorstanding Speakers

Diamond Active Series stereo speakers combine Wharfedale’s award-winning acoustic design with ‘true wireless’ freedom for modern digital lifestyles. The Diamond Active Series from Wharfedale, Britain’s best-known loudspeaker brand, delivers wireless connectivity with a difference. Whilst not the first stereo speakers to offer integrated amplification and Bluetooth connectivity with compatible devices including smartphones, tablets and computers, our clever ‘true wireless’ technology ensures greater flexibility than many such designs. This, combined with award-winning sonic know-how, delivers levels of convenience and performance that separate the Diamond Active Series from the rest of the wireless speaker crowd.

Wharfedale Diamond A1 Active Bluetooth Standmount Speakers

Diamond Active Series stereo speakers combine Wharfedale’s award-winning acoustic design with ‘true wireless’ freedom for modern digital lifestyles. The Diamond Active Series from Wharfedale, Britain’s best-known loudspeaker brand, delivers wireless connectivity with a difference. Whilst not the first stereo speakers to offer integrated amplification and Bluetooth connectivity with compatible devices including smartphones, tablets and computers, our clever ‘true wireless’ technology ensures greater flexibility than many such designs. This, combined with award-winning sonic know-how, delivers levels of convenience and performance that separate the Diamond Active Series from the rest of the wireless speaker crowd.

Wharfedale Denton 85 Standmount Speakers

Denton 85th Anniversary is a two-way speaker in the classic bookshelf tradition, beautifully hand veneered in Mahogany by Wharfedale cabinet makers with an inset front baffle and traditional Tungsten cloth grille. Underneath the traditional exterior, however, the Denton 85th Anniversary is bang up to date and utilises a mixture of traditional and advanced technology. The bass unit features Wharfedale’s innovative woven Kevlar cone mounted on a rigid die-cast chassis, this combination delivering a rich, detailed bass/midrange output with superb dynamic performance. High frequencies are handled by a woven textile soft dome treble unit with high flux ferrite magnet, engineered for smooth, detailed HF extension.

Wharfedale Linton Standmount Speakers

The Wharfedale LINTON represents one of the most iconic models in the long history of Wharfedale loudspeakers. A model that embodied the Wharfedale pioneering research through the 60s, 70s and 80s, with a bloodline dating back to 1965, LINTON has always been manufactured according to the Wharfedale principles of quality and value for money. The new Wharfedale LINTON further exemplifies these two edicts, balancing fine craftsmanship, natural sound quality and affordability inside a beautifully proportioned loudspeaker that has been bought in its millions right across the globe through it’s various incarnations.Please Note: Speakers stands are an optional extra.

Wharfedale SW10 Subwoofer

The SW series of subwoofers offer a level of performance previously unheard of in their class. Revolutionary drive units, amplifier modules and filter stages feature on every model. They strike the perfect balance between power and sound quality, offering remarkable sound pressure levels, yet retaining enough control to be considered audiophile in quality. The new range of SW subwoofers comes with a host of new features. They now come with Non-pressed paper cones for increase self-damping, improved transient impact and intern increased the structural rigidity of the cone itself. The centre vents are copper lined to reduce the magnetic distortion and improve the heat dissipation.