AIM Electronics UA3 USB Interconnect

The UA3 USB Interconnect is a pure silver conductor (single wire) which is used for the signal line, and a high-dimensional transmission characteristic is thoroughly pursued by optimising the conductor size. Overwhelming noise control performance brought about by the adoption of Asahi Kasei Corporation Palshat®MU and a design that maximises the material performance. A Pulshat sheath, aluminum and copper braided shield are placed on each line, and noise suppression between each line is achieved by a double sheath & quad shield structure. SP separate flat structure that allows optimal management of the distance and twist status of signal lines and power lines at all times A shell shield made of copper + gold coating and a copper foil shield are used inside the connector to pursue a shielding effect all the way to the end of the cable.

AIM Electronics NA9 Network Interconnect

The Flagship NA9 Network Interconnect is Equipped with a newly developed 4-layer shield structure "Hoplon" that combines PULSHUT®MU, Copper, High Density Copper & Aluminium Shielding. Each twisted pair is made of Pulshat®MU, a noise-absorbing material. Exclusively developed inner sheath containing conductive functional material.

Van den Hul The HDMI Flat SE Interconnect

The HDMI Flat SE is a special edition of our HDMI Flat HEAC. Offering exceptional performance and value for money, The VDH HDMI Flat SE delivers clear sharp images, accurate color definition, vivid contrast and an infinity of fine detail up to the highest video resolutions. Sound at any digital format is matchless. Key Features: Fully compliant with the HDMI™ High Speed & Ethernet specification for lengths up to 3.0 meter. Supports display resolutions up to 4096 x 2160; warranted for lengths up to 3.0m. High-quality HDMI ‘Type A’ connectors with heavy gold plated contacts provide solid and reliable connections. High-density-coated Oxygen Free Copper conductors warrant minimum signal attenuation. In addition to the cable’s Hulliflex® jacket, the internal conductors’ special coating adds extra protection against aggressive environmental conditions. 4K HDR (HDMI 2.0b) capable Conductor material: Tin plated OFC

Van den Hul The Mainsserver Power Cable

This 8.0 mm special quality powercable is the lower current (12 Amp.) version of Van den Hul's 20 Ampere The Mainsstream Hybrid (BS). With gold-coloured durable HULLIFLEX jacket and 12 Ampere filtering power cord, 7 strands, shielded. Outer diameter 8 mm.

Van den Hul The Air 3T Bi-Amp Berri Bus Terminated Speaker Cable Pair

Van den Hul has introduced a gold coloured four lead cable in approximately the same diameter as the Fusion Technology The Inspiration, equipped with their new 3T conductors, called 3T The AIR. The 3T The AIR cable can be used for bi-amp (4-4) applications. The Termination is done with Van den Hul's special 3T Rhodium plated berri bus connectors.

Van den Hul The CT 2x18 FEP Speaker Cable

Loudspeaker cables are mostly difficult to move through tubes from the power-amp to the rear loudspeakers. With this problem in mind, Van Den Hul came up with a twin-lead FEP insulated loudspeaker cable. How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m.  We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.

Rega Mains Power Lead

This hand assembled Rega mains power lead is constructed with high specification IEC and mains plugs. The cable is constructed from the highest quality 1.5mm² copper conductors with fully earthed, braided & tinned, copper RF screen. This provides the best possible coupling between mains supply and product whilst ensuring low resistance at high current levels. Finally, the transparent outer PVC jacket displays tinned copper braid adding a distinctive visual appearance.