Eversolo AMP-F8 Stereo Power Amplifier

The Eversolo AMP-F8 is a high-performance Class AB stereo power amplifier engineered to deliver exceptional control, expansive dynamics, and un-compromised audio purity. Designed to perfectly partner with the Eversolo DMP-A8 Gen 2 and DMP-A8 Master Gen 2 streaming preamplifiers, it forms a complete, ultra-clean high-end Hi-Fi system. Driven by a massive custom 800W linear toroidal power supply and featuring three pairs of precision-matched high-current BJT power transistors per channel, the AMP-F8 outputs a robust 180W RMS per channel into 8 ohms (280W into 4 ohms) and bridges up to a staggering 500W at 8 ohms. With classic dual analog VU meters, a damping factor over 400 for razor-sharp bass control, and an ultra-low noise floor, the AMP-F8 provides rock-solid authority to drive even the most demanding floorstanding speakers. Key Features: Perfect Partnering System: Designed to seamlessly complement the Eversolo Eversolo DMP-A8 Gen 2 and DMP-A8 Master Gen 2 for a sleek, cohesive, and high-performance two-channel system. High-Purity Class AB Design: Delivers 180W RMS per channel into 8Ω (280W into 4Ω) in Stereo Mode and up to 500W RMS into 8Ω in Bridged Mode. Heavy-Duty 800W Linear Power Supply Dual Differential Architecture & DC Blocker High damping factor (>400 @ 8Ω) guarantees fast, precise transient response and tight, deep bass response across complex speaker loads. Real-Time Dual Analog VU Meters: Equipped with professional-grade balanced XLR and single-ended RCA inputs with selectable gain levels (23dB / 29dB) for seamless preamp/DAC integration. Acoustically Shielded Aluminum Chassis: Precision CNC-machined aluminum casing

Eversolo AMP-F10 Stereo Power Amplifier

The Eversolo AMP-F10 is a powerhouse of a power amplifier, expertly engineered to bridge the gap between raw, explosive energy and delicate, high-fidelity precision. Acting as the definitive partner to the flagship Eversolo DMP-A10 Streamer/DAC/Preamp, it completes a world-class sonic and aesthetic stack. Designed to power high-end home audio and theatre setups alike, this amplifier delivers an incredibly immersive soundstage, robust low-frequency control, and an ultra-clean, whisper-quiet performance. The AMP-F10 was a well-deserved recipient of the Pursuit Perfect System "Essential Audition Award." Key Features: Massive Power Output: Delivers up to 320W per channel at 4 Ohms (200W at 8 Ohms) in stereo, and bridges to a monumental 950W at 4 Ohms (650W at 8 Ohms) for demanding setups. Dual-Channel Independent Linear Power Supply:Powered by a massive 1000W system that isolates channels to prevent cross-interference and maintain a balanced, expansive soundstage. Advanced DC Filtering: Eliminates low-frequency mains interference and transformer hum for an incredibly low noise floor. High-Current MOSFET Array: Uses 5 pairs of matched transistors per channel in parallel to ensure even current and ultra-low distortion. Exceptional Speaker Control: Boasts a damping factor over 600 for tight, articulate, and authoritative bass response. Premium Audio Architecture: Symmetrical design with dual differential amplifiers and negative feedback minimises noise. Flexible Connectivity: Equipped with balanced XLR and unbalanced RCA inputs for seamless integration into any system.

Ayre VX-8 Stereo Power Amplifier

The Ayre Acoustics VX-8 stereo power amplifier embodies three decades of research, development, refinement, and passion, all housed in a stunning chassis. It reflects our journey from the past to the future, promising to deliver pure joy to your listening experience with every use. Key Features: 100% Zero-Feedback Fully-balanced discrete circuitry Ayre’s Double Diamond output stage Ayre’s exclusive Equilock gain stage Linear analog power supply High-speed circuit board material AyreLink communication system

SPL Performer s900 Stereo Power Amplifier

The SPL Performer s900 stereo power amplifier sits in the middle of the Performer line, drawing its design and component choices from the larger SPL Performer s1200. It strikes the perfect balance between sonic excellence and performance, making it ideal for high-resolution speakers that aren’t overly power-hungry, regardless of their size. With an output of 2 x 370 W at 4 Ω (2 x 420 W at 2 Ω; 2 x 200 W at 8 Ω), the s900 has more than enough power to drive any loudspeaker with ease. Despite its compact size, the Performer s900 is a powerhouse. It offers impressive headroom thanks to SPL's VOLTAiR technology, delivering a sound that is rich in detail, vivid, honest, and musically engaging. Key Features: Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel. Stereo pair of XLR inputs with input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB. Recommended for driving speakers over 4 ohms impedance. Bridge Mode, means you are able to turn the two power amplifier channels into one power amplifier, allowing 450 W into 8 Ohm in mono operation mode.

Quad 303 Power Amplifier

As some of the most beloved models in the legacy of one of the world’s most significant Hi-Fi brands, the QUAD 33 Pre amplifier and 303 Power Amplifier set standards across various aspects of desirable audio equipment—performance, reliability, industrial design, value, and the joy of music. The QUAD 303 power amplifier was designed for everyday home use with moderately efficient loudspeakers, yet it has also found a place in broadcasting and recording studios around the globe, valued for its exceptional performance and reliability. This core philosophy remains unchanged. Key Features: 1 x RCA, 1 x Balanced XLR (pair) Inputs 1 x 12V Trigger, 1 x Stereo Speaker, 1 x 12V Trigger (Link) Outputs Stereo 50W @ 8 ohms (70W @ 4 ohms) 'Bridged mode' (for use as a mono-block power amplifier) reaches 140W @ 8 ohms or 170W @ 4 ohms (bridged mono)

SPL Performer m1000 Monoblock Amplifier (Single)

With a power amplification of 750 W (4 Ω) [1000 W (2 Ω); 420 W (8 Ω)], this completely analog amplifier easily controls any loudspeaker. Thanks to the VOLTAiR technology the performance of the m1000 is detail-rich, vivid, honest and plain simply beautiful. Key Features: Class-AB amplifier circuit XLR balanced input Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel. Input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB. Recommended for driving speakers over 2 ohms impedance. 3 interchangeable decorative panels included to switch up the look of the m1000.

SPL Performer s800 Stereo Power Amplifier

This small completely analog stereo power amplifier shows everyone that size does not necessarily have anything to do with greatness. With a power amplification of 2 x 285 W (4 Ω) [2 x 185 W (8 Ω)] or 1 x 450 W (8 Ω, Bridge Mode), this amplifier easily controls any loudspeaker. Thanks to VOLTAiR technology, it is fast, precise and highly efficient with outstanding sound. Key Features: Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel. Stereo pair of XLR inputs with input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB. Recommended for driving speakers over 4 ohms impedance. Bridge Mode, means you are able to turn the two power amplifier channels into one power amplifier, allowing 450 W into 8 Ohm in mono operation mode.

SPL Performer s1200 Stereo Power Amplifier

This impressive stereo power amplifier leads even the most demanding speakers to soundscapes beyond your expectations. With a power amplification of 2 x 520 W (4 Ω) [2 x 550 W (2 Ω); 2 x 300 W (8 Ω)], this completely analog amplifier easily controls any loudspeaker. Thanks to the VOLTAiR technology the performance of the s1200 is detail-rich, vivid, honest and plain simply beautiful. Key Features: Class-AB amplifier circuit Stereo pair of XLR and RCA inputs selected via the Input Select switch on the rear panel. Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel. Input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB. Recommended for driving speakers over 2 ohms impedance 3 interchangeable decorative panels included to switch up the look of the s1200.

Synthesis Roma 98DC Valve Mono Power Amplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Synthesis, the long-established Italian manufacturer of top-quality hi-fi electronics, is enriching it's ROMA series line-up with a new 80W tube mono power amplifier; the ROMA 98DC. This mono amplifier brings the superb sonic performance and high power thanks to a pair of KT88 tubes in an ultra-linear configuration. Key Features: Premium valves selected with utmost care Power stage uses iconic KT88 tubes Perfectly paired with the ROMA 117DC stereo preamp Capable of running very demanding speakers Ultra wide frequency response Stylish back-lit power monitor on the front panel Mono design for true channel separation Asahi Kasei D/A Converter Class AB power amplifier High-Quality finishes and components

McIntosh MC152 Power Amplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. The McIntosh MC152 stereo amplifier delivers 150 Watts of power into two channels at 2, 4 or 8 Ohms. Both balanced and unbalanced inputs are included for connecting your preamplifier. McIntosh's smallest current model solid state stereo amplifier in terms of power output, the MC152 is perfect for modest sized systems where higher power output levels are not needed or in home theaters to power surround channels. Key Features: 150 Watts x 2 Channels Space saving 6" tall chassis

McIntosh MC275 MK VI Valve Power Amplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Upon its initial release in 1961, the MC275 Vacuum Tube Amplifier became an instant favorite due to its ability to drive the power-hungry speakers of that time period with great power at low distortion levels. However, as transistors emerged and vacuum tubes became 'old technology,' the MC275 was discontinued in 1971. Thankfully, that is not where the story of the MC275 ends. Key Features: 75 Watts x 2 channels or 150 Watts x 1 channel Unity Coupled Circuit Output Transformers (4) KT88, (4) 12AT7 and (3) 12AX7A vacuum tubes One of the most iconic amplifiers ever made by any brand

McIntosh MC312 Power Amplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Prepare yourself for years and years of musical enjoyment with the MC312 Power Amplifier. A 300 Watt per channel stereo amplifier, the MC312 is a great choice to power virtually any home audio system. The full 300 Watts can be delivered to almost any speakers regardless if they have 2, 4 or 8 Ohm impedance thanks to the unique Autoformer™ technology. Key Features: 300 Watts x 2 Channels 27% increase in Dynamic Headroom compared to previous model McIntosh Autoformers™

McIntosh MC611 Power Amplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. The monoblock MC611 Quad Balanced Power Amplifier produces 600 Watts of power – enough to satisfy nearly any loudspeaker. A pair of MC611s can easily drive an impressive home stereo system, or add more of them to power a home theater. Thanks to the unique output Autoformer™ technology, your speakers will receive the full 600 Watts regardless if they have 2, 4 or 8 Ohm impedance, allowing you the ability to use the MC611 to its full potential. Key Features: 600 Watt Quad Balanced Monoblock 55% increase in Dynamic Headroom compared to previous model

McIntosh MC1.25KW Power Amplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. The MC1.25KW Quad Balanced Power Amplifier is one of their most advanced amplifiers. Redesigned from top to bottom, it replaces the venerable MC1.2KW as McIntosh's most powerful single chassis monoblock amplifier. A simple glance at this 158 pound (71.7 kg) amp is enough to convey its power and performance capabilities, but when you hear it – then you’ll truly understand what it can do. Key Features: 1,200 Watt Quad Balanced Monoblock Redesigned from top to bottom

ATOLL AM100 Signature Power Amplifier

The power amplifier AM100 Signature can be added to any stereo or multichannel solutions. Coupled with a preamplifier, they make for transparent and detailed listening. The various sound planes are rigorously respected. Built to be evolutionary, they can be used by themselves or in bi-amplification. Further, all models are mono-block bridgeable by a single switch on the main board. It is equipped on serial of a 12V Trigger (auto switch on/off with a preamp).

Pro-Ject Box Design Amp Box DS2 Power Amplifier

The Amp Box DS2 is built around a highly efficient, low-energy Class D amplifier module that delivers high output power, giving it the ability to drive even very demanding speakers. This simple yet effective stereo power amplifier is capable of delivering a very clean, pure sound performance with minimal electrical interferences. Key Features: Audiophile class D power amplifier Impressive signal spectrum and lower distortion High efficiency from mains to audio power Low heat emission Stereo level input (RCA) Loop output (RCA) Isolated speaker outputs Trigger input & loop out Elegant aluminium - metal sandwich casing Available in various finish options