Audio-Technica AT33xMONO/II Dual Moving Coil Monaural Cartridge

The AT33xMONO/II uses a "True Mono" dual moving coil design that is engineered for pristine monaural playback. By only generating signal from the horizontal groove movement, it effectively ignores vertical noise components. The result is exceptionally clear mono sound, characterised by a more substantial low end and significantly reduced surface noise. This design is also perfectly suited for playing mono records on a stereo system. Key Features: Stylus & Type: AT33x Series dual moving coil monaural cartridge with a 0.65 mil conical nude stylus. Acoustic Focus: Preserves the warmth and fullness of acoustic instruments, making it ideal for classic mono jazz recordings from the 1950s and '60s. True Mono Design: “True Mono” dual moving coil design generates the electrical signal only from horizontal movement, resulting in exceptionally clear monaural sound with a substantial low end and reduced surface noise. Coil Material: PCOCC (Pure Copper by Ohno Continuous Casting) coils provide pure, smooth signal transmission. Magnet System: Samarium cobalt magnet and pure iron yoke ensure highly efficient power generation, producing warm, richly textured playback. Resonance Control: The composite cartridge body (die-cast zinc, aluminium, and high-rigidity polymer) reduces resonance for balanced, natural sound reproduction. Vibration Damping: Highly rigid and dense die-cast zinc at the base suppresses unwanted vibrations, improving mid-to-low frequency expressiveness. Cantilever & Suspension: Features a high-hardness duralumin pipe cantilever and a newly developed suspension/damper design (with lower dynamic compliance) compatible with a variety of tonearms. Installation: Threaded mounting holes simplify headshell mounting. Terminal Quality: Thick gold plating on the terminal pins reduces contact resistance and enhances sound quality. Craftsmanship: Crafted and hand-finished by artisans in Japan.

Audio-Technica AT33xMLD Dual Moving Coil Stereo Cartridge

The AT33xMLD delivers warm, highly detailed sound, a superb match for both rock and jazz genres. It features a microlinear nude stylus mounted on a duralumin tapered pipe cantilever. Key to its performance is our newly engineered suspension system, which utilises piano wire to enhance tracking accuracy. This results in a slight decrease in dynamic compliance, providing a more substantial and impactful audio presentation, particularly in the mid-to-low frequency range. Key Features: Sound Profile: Delivers warm, detailed, and natural sound, making it an excellent choice for rock and jazz records (especially '50s-'70s recordings). Stylus & Cantilever: Features a microlinear nude stylus for highly accurate groove tracking, mounted on a high-hardness duralumin tapered pipe cantilever. Engineered for Clarity: Dual Moving Coil Design: Provides outstanding channel separation via independent left and right coils. PCOCC Coils: Uses Pure Copper by Ohno Continuous Casting for pure, smooth signal transmission. Vibration Control: Composite Body: Reduces resonance with a blend of die-cast zinc, aluminum, and high-rigidity polymer. Die-Cast Zinc Base: Suppresses unwanted vibrations, improving mid-to-low frequency expressiveness. Convenience & Quality: Threaded mounting holes for easier headshell installation. Features thick gold plating on terminal pins to reduce contact resistance. Hand-finished by artisans in Japan.  

Audio-Technica AT33xMLB Dual Moving Coil Stereo Cartridge

The AT33x Series is the first major overhaul of the AT33 in years, bringing new warmth and fullness to music. Technological advances, including the first use of die-cast zinc at the cartridge base, minimise resonance and boost mid-to-low frequency expressiveness, ensuring you hear the finest details across the entire audio spectrum. The AT33xMLB is engineered for high-resolution tracking. It features a microlinear nude stylus on a solid boron tapered cantilever, capable of capturing the subtlest groove details. This precision is ideal for detailed orchestral recordings and high-fidelity records made since the late 1970s. A new piano wire suspension enhances tracking accuracy, slightly lowering dynamic compliance for more substantial audio, particularly in the mid-low range. Key Features: Microlinear Stylus: Tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than standard elliptical or conical styli. Solid Boron Cantilever: Tapered design ensures rapid vibration transmission for accurate reproduction of dynamic musical passages. Dual Moving Coil: Independent left and right coils provide outstanding channel separation. PCOCC Coils: Used for pure, smooth signal transmission. Composite Body: Constructed from die-cast zinc, aluminum, and high-rigidity polymer to reduce and disperse resonance for a balanced, natural sound. Zinc Base: Highly rigid, dense die-cast zinc suppresses unwanted vibrations and improves mid-to-low frequency expressiveness. High-Fidelity Components: Neodymium magnet and permendur yoke maximise efficiency for high-resolution playback. Advanced Suspension: Newly developed mechanism and damper design (with lower dynamic compliance) allow compatibility with a variety of tonearms. Double-Step Armature: Increases cantilever rigidity for better resonance suppression. Quality & Convenience: Features threaded mounting holes for easy setup, gold-plated terminal pins for enhanced sound quality, and is hand-finished by artisans in Japan.

Audio-Technica AT-VM740xML Dual Moving Magnet Stereo Cartridge

All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for significantly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. The number of coil turns has also been slightly reduced to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. The lightweight microlinear stylus of the AT-VM740xML precisely traces the record groove with incredible accuracy, delivering nuanced audio reproduction that elliptical and conical styli simply can't match. Key Features: AT-VMx dual moving magnet cartridge with microlinear stylus Microlinear stylus tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than elliptical and conical styli Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Die-cast aluminum housing reduces vibrations and resonance Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Aluminum tapered cantilever reduces mass near the stylus tip for quicker signal transmission Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM745xML Dual Moving Magnet Stereo Cartridge

The new, lightweight microlinear stylus of the AT-VM745xML traces the record groove with incredible accuracy, delivering audio reproduction that elliptical and conical styli simply can't match. This nuanced reproduction is further enhanced by the adoption of a solid boron cantilever, which transmits signals about 2.5 times faster than the previous model’s aluminium pipe, leading to more accurate reproduction of dynamic musical passages. All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for significantly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. We've also slightly reduced the number of coil turns to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. Key Features: AT-VMx dual moving magnet cartridge with microlinear stylus Microlinear stylus tracks the record groove with incredible accuracy, providing more nuanced sound reproduction than elliptical and conical styli Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminium housing reduces vibrations and resonance Paratoroidal coils improve generating efficiency for enhanced channel separation,channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application *Excludes mono models

Audio-Technica AT-VM760xSL Dual Moving Magnet Stereo Cartridge

The AT-VM760xSL is equipped with an ultra-lightweight special line contact stylus that traces the record groove with incredible accuracy and minimal abrasion. This nuanced audio reproduction is further enhanced by the adoption of a solid boron cantilever, which transmits signals about 2.5 times faster than the previous model’s aluminum pipe, leading to more accurate reproduction of dynamic musical passages. All VMx cartridges feature a generator with paratoroidal coil construction, utilising two coils per channel—one stacked behind the other—for significantly improved efficiency. A central shield plate separates the left and right channels to reduce crosstalk and maintain a clear stereo image. The copper wire used for the coils has been upgraded to PCUHD® (Pure Copper Ultra High Drawability), resulting in richer, more nuanced audio reproduction. The number of coil turns has also been slightly reduced to improve transient response, allowing the cartridge to react more quickly to signal changes for stunningly clean music with lifelike immediacy. Key Features: AT-VMx dual moving magnet cartridge with special line contact stylus Special line contact stylus traces the record groove with extreme accuracy, delivering premium high-frequency response and detailed spatial expression Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages Die-cast aluminium body reduces vibrations and resonance Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VMN10xCB Replacement Stylus Conical Bonded

VMNX10CB Replacement stylus for VM510xCB & VM610xMONO.  Key Features: Conical Bonded Stylus Bonded Round Shank Construction

Audio-Technica AT-VM520xEB Dual Moving Magnet Stereo Cartridge

Audio-Technica's new AT-VMx series premium dual moving magnet (MM) cartridges deliver a rich, detailed, and expansive sound. Designed to closely mirror the vinyl cutting head, they feature dual magnets for exceptional channel separation and extended frequency response. The VMx series incorporates material and design upgrades for refined sound. A paratoroidal coil generator with two coils per channel and a center shield plate reduces crosstalk, while PCUHD® copper wire enhances audio reproduction. Reduced coil turns improve transient response for remarkably clear and immediate sound. Ease of use is also enhanced with threaded inserts for simpler mounting and a V-cut stylus protector for precise stylus positioning. The 0.3 x 0.7 mil elliptical bonded stylus of the AT-VM520xEB tracks the record groove with accuracy for outstanding audio reproduction. Key Features: AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with accuracy for outstanding audio reproduction Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application *Excludes mono models

Audio-Technica AT-VM530xEN Dual Moving Magnet Stereo Cartridge

Audio-Technica's new AT-VMx series premium dual moving magnet (MM) cartridges deliver a rich, detailed, and expansive sound. Designed to mirror the vinyl cutting head, they use dual magnets for exceptional channel separation and extended frequency response. The VMx series features a paratoroidal coil generator with PCUHD® copper wire and reduced coil turns, resulting in improved efficiency, reduced crosstalk, and stunningly clear, immediate audio. The AT-VM530xEN model stands out with its lightweight 0.3 x 0.7 mil elliptical nude stylus, which reduces vibration system mass for better frequency response and less distortion than a bonded stylus. For user convenience, VMx cartridges include threaded inserts for easier mounting and a V-cut stylus protector for precise stylus positioning. Key Features: AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus 0.3 x 0.7 mil elliptical nude stylus tracks the record groove with accuracy for outstanding audio reproduction Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application

Audio-Technica AT-VM510xCB Dual Moving Magnet Stereo Cartridge

Audio-Technica's AT-VMx series of premium dual moving magnet (MM) cartridges offers enhanced warmth and realism, creating an expansive and detailed soundstage. The AT-VM510xCB model features a 0.6 mil conical bonded stylus for reliable tracking and durability. Mounting is simplified thanks to threaded inserts on each VMx cartridge body, requiring just two screws—ideal for integrated tonearms often found on high-end turntables. Additionally, a new V-cut in the stylus's flip-up protector provides a quick visual guide for precise stylus placement when lowering it onto a record. Key Features: AT-VMx dual moving magnet cartridge with 0.6 mil conical bonded stylus Conical stylus tracks the centre of the record groove for reliable performance and durability Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response PCUHD® (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response Center shield plate between the left and right channels reduces crosstalk for clear stereo sound Threaded inserts make cartridge easier to mount, especially to integrated tonearms V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record Durable low-resonance polymer housing Aluminum cantilever Compatible with any turntable headshell that accepts 1/2" cartridges Compatible with most AT-VMx series

Audio-Technica AT-LPW50BTRW Wireless Manual Belt Drive Turntable

Audio-Technica’s AT-LPW50BT-RW wireless turntable provides optimal high-fidelity audio reproduction with the option of wired or Bluetooth® listening. The manual record player’s stunning rosewood-finished veneer adds to the turntable’s refined style, and also dampens low-frequency acoustic feedback to ensure you experience crystal clear, uninterrupted sound. Key Features: Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM Motor features a speed-sensor system to maintain accurate platter rotation speed Adjustable dynamic anti-skate control Professional anti-resonance, die-cast aluminum platter with rubber mat AT-HS4(silver) universal 1/2"-mount headshell and AT-VM95E (black) Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus The AT-VM95Ecartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with rosewood-finished wood veneer Built-in switchable phono pre-amplifier for phono or line-level output AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Audio-Technica AT-LP3XBT Automatic Belt Drive Turntable

The AT-LP3XBT is a fully automatic turntable designed to deliver outstanding analogue sound with enhanced Bluetooth® wireless technology. Key Features: Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM High-fidelity audio with Bluetooth wireless technology Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable Compatible with the high-quality Qualcomm® aptX™ audio codec Balanced straight tonearm with hydraulically damped lift control and rest AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application Includes the AT-HS3 universal headshell Built-in switchable phono/line pre-amplifier with detachable dual RCA output cable with grounding wire Anti-resonance, die-cast aluminium platter with felt mat Damped base construction for reduced low-frequency feedback coloration Included Accessories: detachable RCA output cable (Dual RCA male to dual RCA male with ground), 45 RPM adapter, removable hinged dust cover, and detachable power cable

Audio-Technica AT-LPW50PB Manual Drive Belt Turntable

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM. Key Features: Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM Motor features a speed-sensor system to maintain accurate platter rotation speed Adjustable dynamic anti-skate control Professional anti-resonance, die-cast aluminum platter with rubber mat AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application Straight, matte-finish, carbon-fiber tonearm with hydraulically damped lift control and lockable rest Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with high-gloss, piano-black finish High-isolation, height-adjustable feet Built-in switchable phono preamplifier for phono or line-level output AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Audio-Technica AT-LPW40WN Manual Belt Drive Turntable

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM. Key Features: Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM Motor features a speed-sensor system to maintain accurate platter rotation speed Fully manual operation Adjustable dynamic anti-skate control Professional anti-resonance, die-cast aluminum platter with rubber mat AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer Built-in switchable phono pre-amplifier for phono or line-level output AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Audio-Technica AT-LP60XBT Wireless Automatic Belt Drive Turntable

A fully automatic wireless belt-drive turntable. Key Features: Wired or wireless, enjoy the best of both worlds with the LP60XBT Connects to the latest Bluetooth® speakers and headphones New Qualcomm® aptX™ codec improves your listening experience Fully automatic operation with two speeds: 33-1/3 and 45 RPM Integral Dual Moving Magnet™ phono cartridge with replaceable stylus Available in available in black or white

Audio-Technica AT-LP5X Manual Direct Drive Turntable

Building on Audio-Technica’s analogue heritage and over 50 years of Japanese audio design, the AT-LP5x features upgraded technology while keeping the contemporary style and acclaimed performance of its predecessor, the AT-LP5. Key Features: Direct-drive, low noise motor Fully manual operation with three speeds: 33-1/3, 45 and 78 RPM AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus Lightweight AT-HS6 headshell J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and ’70s, are engineered to minimize tracking errors Switchable MM/MC built-in pre-amplifier and line enables connection to components with or without a dedicated phono input Anti-resonance, die-cast aluminum platter Heavy rubber damping mat for improved low-frequency reproduction AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Elegant matte black finish Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable Included dust cover and mounting hardware

Audio-Technica AT-LPW30TK Manual Belt Drive Turntable

Key Features: Teak effect wood veneer finish Connect directly to speakers at home with the built-in phono preamplifier Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM Adjustable dynamic anti-skate control Professional anti-resonance, die-cast aluminium platter with rubber mat AT-HS4 headshell and AT-VM95C Dual Moving Magnet phono cartridge