Michell Revolv Turntable

Please Note: Turntable does not include tonearm or cartridge.Perfectly situated between our minimalist TecnoDec and the flagship Gyro, the Revolv embodies the precision, clarity, and enduring quality synonymous with the Michell brand. It provides this exceptional audio performance in a streamlined, user-friendly format that is highly rewarding. Built on a precision-machined aluminum chassis, the Revolv integrates advanced technologies honed through our engineering expertise. Its design features a Delrin® platter with peripheral brass mass for stability, a grounded and shielded motor pod for electrical isolation, and Sorbothane™-dampening feet to nullify vibration. The result is a deck that retrieves tone, timing, and texture with remarkable accuracy and depth. Key Features: Solid 19mm aerospace-grade aluminium tooling plate chassis Unsuspended design for direct mechanical grounding Rigid tonearm coupling via precision-machined aluminium arm plate Advanced SorbothaneTM isolation feet with six damping nodes Inverted mono-helix oil-circulating main bearing Shielded motor pod and PSU with electronic speed selection Delrin® platter with 10mm peripheral brass weights for increased inertia Designed, engineered, and assembled by hand in the UK

Rega Planar 2 Turntable

The Planar 2 was developed over two years alongside the latest Planar 3. Featuring the RB220 tonearm, a new 24 V, low noise motor, acrylic high gloss laminated plinth, newly designed central bearing and so much more. Every feature of this innovative new turntable is designed to extract the maximum amount of information and detail from your vinyl collection. Key Features: RB220 precision tonearm Rega Carbon cartridge factory fitted 24 V low noise, low vibration motor 10 mm float glass opti-white platter Supplied with clear dust cover as standard Lifetime warranty against manufacture defects

Michell Amplifier Binding Posts - Pack of 4

Please Note: This listing is for a pack of 4. Gold-plated ultra high quality speaker terminal, for amplifier.

Chord Electronics BerTTi Stereo power amplifier

Completing the Chord Electronics ULTIMA line of power amplifiers, we introduce BerTTi to the desktop Table Top range, a compact yet powerful stereo amplifier equipped with ULTIMA technology in a compact, space-saving chassis delivering dynamic, transparent sound. Output power: 75 W into 8 Ω Frequency range: 5 Hz-100 kHz +/- 0.5 dB THD: 0.008 % SNR: 87 dB (A-weighted) Input impedance: 100 kΩ unbalanced/balanced Gain: 30 dB Input sensitivity: 0.78 V Inputs: 1x stereo pair of balanced XLRs, 1x stereo pair of gold-plated unbalanced RCA Output: 1x pair per channel of gold-plated speaker terminals 10 A IEC power cable Designed, engineered and made in the UK Bead-blasted aircraft-grade aluminium Compact chassis for flexible placement Available in silver or black Length: 235 mm Width: 226 mm Height: 59 mm Net weight: 3.75 kg

Atacama Moseco CC03 Speaker Stand

The Moseco CC03 has a Top Plate size of 550mm (21.65") wide, 250mm (9.8") deep. If a smaller top plate is required, please refer to the CC01 and CC02 versions. There are five height options available ranging from 215mm to 615mm (excluding floor spikes), so allowing you to optimize the position of your centre channel speaker.

Atacama Moseco CC02 Speaker Stand

The Moseco CC02 has a Top Plate size of 475mm (18.7") wide, 210mm (8.3") deep. If a smaller or larger top plate is required, please refer to the CC01 and CC03 versions. There are five height options available ranging from 215mm to 615mm (excluding floor spikes), so allowing you to optimize the position of your centre channel speaker.

Rega Mini Remote Handset for Io, Brio & Elex

The mini remote handset is a small compact system remote providing all of the basic functions for the Io, Brio and Elex. For full system remote please see the Solaris system remote handset.

Atacama Evoque Eco SE2 Replacement Legs

To fit Atacama Evoque Eco 60-40 SE2. Heights quoted are the inner dimension once the legs are fully assembled with all fixtures and fittings in place. Please Note: Prices are for four outer tubes and four inner leg studs. All other components supplied originally with the shelf module will need to be reused.

Atacama Evoque Eco SE Replacement Legs

To fit Atacama Evoque Eco 60-40 SPECIAL EDITION & 60-50 SPECIAL EDITION. Heights quoted are the inner dimension once the legs are fully assembled with all fixtures and fittings in place. Please Note: Prices are for four outer tubes and four inner leg studs. All other components supplied originally with the shelf module will need to be reused.

Atacama Evoque Eco Replacement Legs

To fit Atacama Evoque Eco 60-40, 35-40, 110-40 Hifi/AV racks. Heights quoted are the inner dimension once the legs are fully assembled with all fixtures and fittings in place. Please Note: Prices are for four outer tubes and four inner leg studs. All other components supplied originally with the shelf module will need to be reused.

Atacama Speaker Stand Isolation Gel Pads

Designed to adhere to speaker stand top plates and are made from a high performance polyurethane elastomer which, as well as being non-slip and non scratch, gives excellent sound and vibration resistance.

Atacama HD-L Spike Shoes

Atacama High Density spike shoes are supplied in packs of 4 and are made of a copper/zinc alloy construction. Each shoe features a location hole on the upper surface and is supplied with a non-slip E.P.D.M. elastomer membrane pad. This pad has been designed to act as a buffer between the spike shoe and the floor so giving additional protection to delicate floor coverings. Please Note: Two sizes of shoe are available, HD-L (High Density-Large) and HD-S (High Density-Small).

Atacama HD-S Spike Shoes

Atacama High Density spike shoes are supplied in packs of 4 and are made of a copper/zinc alloy construction. Each shoe features a location hole on the upper surface and is supplied with a non-slip E.P.D.M. elastomer membrane pad. This pad has been designed to act as a buffer between the spike shoe and the floor so giving additional protection to delicate floor coverings. Please Note: Two sizes of shoe are available, HD-S (High Density-Small) and HD-L (High Density-Large).

Atacama NeXXus Top Plate Pack

If you are looking to own a pair of the Award winning Atacama Moseco Series or the new NeXXus series speaker stands but are finding that the standard 130mm x 170mm top plates are too small for your requirements, Atacama now offers Top Plate packs for when larger bookshelf style speakers need to be accommodated. Please Note: Each pack consists of two top plates. Only one pack is required per pair of speaker stands.

Rega Kyte Stand Adaptor

Custom designed for the Kyte loudspeaker to allow mounting on a wide variety of loudspeaker stands. Contents: 2 x Adaptors 4 x damping feet (factory fitted top mount) for correct axis alignment of loudspeaker 4 x mounting screws 8 x rubber optional base feet (to be customer fitted depending on the size of the stand used.

Rega Advanced EBLT Drive Belt

Custom made high-quality Advanced EBLT drive belt.

Rega Reference EBLT Upgrade Drive Belt

Custom made premium Reference EBLT drive belt. Fitted as standard to all Planar 8 and Planar 10 turntable models from March 8th 2021. The Rega Reference EBLT drive belt is the culmination of many years of R&D and advanced tooling trials. The most accurate drive belt they have ever produced, the Reference EBLT is now fitted as standard to all Planar 8 and Planar 10 turntable models as standard. The Reference belt is suitable for all Rega turntables but highly recommended for the Planar 6 and any Planar 3 using the Rega Neo TT PSU. Each belt is moulded on Rega's highly accurate custom tooling using a unique secret blend. Once moulded, the belts are cryogenically frozen and barrelled to remove any excess flash in order to create perfect cross sectional roundness which is critical for accurate speed and stability. In normal use and conditions, the lifespan of the EBLT drive belt is 50% longer than the previous model. All Reference belts go through a unique curing process which guarantees the highest achievable level of accuracy. Technical Specifications: Rega Drive Belt: Reference EBLT monomer Diameter / cross sectional roundness: Improved stability / Speed accuracy Lifespan: 50% longer lifespan than a polychloroprene belt Advanced curing process: Improved consistency in modulus of material

Rega Kyte Standmount Speakers

Become immersed in the stunningly natural sound of the Kyte loudspeakers, designed to deliver the true Rega sound at an affordable price. Using our own ZRR high frequency unit and a handmade pair of MX-125 bass-mid drivers, this compact bookshelf speaker is designed to complement any hi-fi or audio system. Key Features: Custom designed phenolic resin cabinets Unique ceramic plate & cross brace construction Handmade MX-125 bass-mid unit Rega designed ZRR high frequency unit Bass reflex design, rear ported UK designed and manufactured Lifetime warranty against manufacture defects

Rega Planar 1 Plus Turntable

All the features of the award-winning Planar 1 turntable with the addition of a built-in high quality MM phono stage, making this the ultimate ‘Plug and Play’ turntable. Key Features: Integrated MM phono stage RB110 tonearm with ultra-low friction play bearings Factory fitted Carbon moving magnet cartridge EBLT advanced drive belt Phenolic resin, flywheel effect platter High quality, 24 V low noise synchronous motor Lifetime warranty against manufacture defects

Rega Planar 1 Turntable

This multi-award winning ‘Plug and Play’ design utilises Rega's handmade RB110 tonearm, with pre-set bias and a factory fitted Carbon cartridge. Set-up is possible in under 30 seconds and delivers incredible performance well beyond its price point. Key Features: EBLT Advanced drive belt fitted as standard New matt finish for 2021 RB110 tonearm with ultra-low friction play bearings Factory fitted Carbon moving magnet cartridge Phenolic resin, flywheel effect platter High quality, 24 V low noise synchronous motor Lifetime warranty against manufacture defects

Rega Atlas MK2 Tracking Force Gauge

The Rega Atlas Tracking Force Gauge MK2 is designed to be easy to use, consistent and exceptionally accurate. Our engineers have meticulously selected each component to offer the highest possible performance.   The Atlas was born out of frustration having used so many outsourced gauges in our tonearm production areas over the years for them to consistently fail after minimal use. The re-designed MK2 version now offers a much wider weight range to deal with the more extreme cartridges on the market (up to 10g). Our engineers have also improved stability and sensitivity to ensure total accuracy every time.

Chord Electronics Ultima 780W Mono Power Amplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. The ULTIMA mono power amplifiers have been conceived for the very finest high-end audio systems, those which by their very nature, tend to have the most demanding and most difficult-to-drive large loudspeakers. They deliver unsurpassed power delivery and are capable of effortlessly driving any speaker. ULTIMA is the company’s most accomplished amplifier in its 30-year history and one that draws on Chord Electronics’ three decades of proprietary-technology amplifier manufacturing. It features an all-new circuit topology, the first completely new design since those early days. The new dual-feed forward error-correction amplifier technology is a progression of Dr Malcolm J Hawksford’s (emeritus professor at Essex University) technical paper, refined by Bob Cordell of Bell Labs. Key Features: 780w into 8Ω Class AB Sliding BiasClass AB Sliding Bias HF Switch Mode Power SupplyHF Switch Mode Power Supply Proprietary Chord MOSFETsProprietary Chord MOSFETs Fully Balanced CircuitryFully Balanced Circuitry Convection CooledConvection Cooled Balanced XLR Inverted InputBalanced XLR Inverted Input Balanced XLR Non-inverted InputBalanced XLR Non-inverted Input Unbalanced RCA Inverted InputUnbalanced RCA Inverted Input Unbalanced RCA Non-inverted InputUnbalanced RCA Non-inverted Input 12v Trigger On/Off Input12v Trigger On/Off Input Dimmable feature lightingDimmable feature lighting Included Top Light RingIncluded Top Light Ring Solid Aluminium ChassisSolid Aluminium Chassis

Chord Electronics Ultima Pre Preamplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Designed to be entirely uncompromising, the ULTIMA preamp is a world-class amplifier with advanced proprietary Chord Electronics technology. A product of three decades of research, design and engineering here in the UK, it benefits from true dual-mono construction with separate ultra-high-frequency power supplies for each channel, giving the best possible separation. With the addition of valuable low-noise circuitry, the noise floor performance is exceptional, at beyond -117dB. Key Features: HF Switch Mode Power Supply Blue Velvet ALPS PotentiometerBlue Velvet ALPS Potentiometer -125dB Signal to Noise Ratio-125dB Signal to Noise Ratio Advanced Shielding TechnologyAdvanced Shielding Technology Fully Balanced CircuitryFully Balanced Circuitry Analogue Signal PathAnalogue Signal Path Input/Output BufferingInput/Output Buffering 4x Stereo RCA Inputs4x Stereo RCA Inputs 4x Stereo XLR Inputs4x Stereo XLR Inputs 3x Stereo RCA Outputs3x Stereo RCA Outputs 3x Stereo XLR Outputs3x Stereo XLR Outputs Convection CooledConvection Cooled Included Top Light RingIncluded Top Light Ring 12v Trigger On/Off Input/Output12v Trigger On/Off Input/Output Solid Aluminium ChassisSolid Aluminium Chassis

Chord Electronics Ultima 2 Power Amplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Updated for the modern age, the ULTIMA 2 carries the very latest Chord Electronics amplifier technology. As part of their extended 30th-anniversary celebrations in 2019, Chord have implemented the flagship ULTIMA amplifier topology into a new mono power amplifier, Ultima 2. Key Features: Class AB Sliding BiasClass AB Sliding Bias HF Switch Mode Power SupplyHF Switch Mode Power Supply Proprietary Chord MOSFETsProprietary Chord MOSFETs Fully Balanced CircuitryFully Balanced Circuitry Convection CooledConvection Cooled Balanced XLR Inverted InputBalanced XLR Inverted Input Balanced XLR Non-inverted InputBalanced XLR Non-inverted Input Unbalanced RCA Inverted InputUnbalanced RCA Inverted Input Unbalanced RCA Non-inverted InputUnbalanced RCA Non-inverted Input 12v Trigger On/Off Input12v Trigger On/Off Input Dimmable feature lightingDimmable feature lighting Included Top Light RingIncluded Top Light Ring Solid Aluminium ChassisSolid Aluminium Chassis

Chord Electronics Ultima 3 Mono Power Amplifier (Single)

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Featuring the all-new circuit topology, ULTIMA 3 is a thoroughly modern amplifier for the high-resolution age.Please Note: This price is for one amplifier. The new ULTIMA amplifier topology (which to date has been exclusive to the range-topping ULTIMA power amp), is now more affordable than ever before having trickled down into the new ULTIMA 3 mono power amp, which is every bit a Chord Electronics thoroughbred and shares the same winning formula as its range-topping cousin. Key Features: Class AB Sliding BiasClass AB Sliding Bias HF Switch Mode Power SupplyHF Switch Mode Power Supply Proprietary Chord MOSFETsProprietary Chord MOSFETs Fully Balanced CircuitryFully Balanced Circuitry Convection CooledConvection Cooled Balanced XLR Inverted InputBalanced XLR Inverted Input Balanced XLR Non-inverted InputBalanced XLR Non-inverted Input Unbalanced RCA Inverted InputUnbalanced RCA Inverted Input Unbalanced RCA Non-inverted InputUnbalanced RCA Non-inverted Input 12v Trigger On/Off Input12v Trigger On/Off Input Dimmable feature lightingDimmable feature lighting Included Top Light RingIncluded Top Light Ring Solid Aluminium ChassisSolid Aluminium Chassis

Chord Electronics Ultima 5 Power Amplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. ULTIMA 5 is a progression of Chord's most famous stereo power amplifier, the legendary SPM 1200 MK II (widely considered to be the definitive Chord Electronics amplifier). Now incorporating the latest-generation ULTIMA circuit topology, the new ULTIMA 5 is set to become a future classic. Considered to offer the ideal balance between performance and price, the ULTIMA 5 offers an impressively affordable 300 watts – enough to drive all but the most demanding loudspeakers.

Rega Io Integrated Amplifier

The all new io amplifier is designed with every music lover in mind. Simple to setup and operate, the io is designed to integrate seamlessly into any hi-fi system. The compact size allows it to be used in a variety of systems and delivers a performance well beyond its price point. As you would expect, there is a high quality built in MM (moving magnet) phono stage, two line level inputs, a redesigned mini remote control handset and high quality headphone output that is cleverly integrated to deliver optimum performance without compromising the audio circuit. All of these features combine to deliver a powerful, well balanced musical performance at an incredible price.

Chord Electronics Ultima Pre 2 Preamplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. The fully modernised ULTIMA PRE 2 is built to complement stereo systems of the highest order and represents the finest Chord Electronics engineering inside and out. Just as a preamplifier should, the ULTIMA PRE 2 adds nothing to the original waveform and instead preserves it with zero colouration. This is thanks to our latest advances in switch-mode power supply design, developed from aerospace technologies, and our ultra-low-noise proprietary solid-state circuitry which is both carefully shielded and equipped with premium system components. As a result, the ULTIMA PRE 2 is able to achieve unprecedented noise floor performance of -130dB, meaning your source will always sound like your source and nothing else.

Chord Electronics Symphonic Moving Coil Phono Preamplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Nestling in the Choral range, the Symphonic is Chord's flagship MC phono stage, offering a range of advanced features over the entry-level Dual. The high-performance Symphonic uses the latest high-frequency power supply technology to exploit vinyl’s full potential, along with many new key features, to bring the performance levels in line with the Choral range, home of the DAVE DAC/preamp.

Chord Electronics Huei MM/MC Phono Preamplifier

Huei’s advanced design offers (for the first time in a Chord Electronics phono preamp) ultra-low-noise microprocessor control of its main features, including a convenient memory function. With multiple options for impedance-matching, seven-stage switchable gain and a switchable rumble filter, Huei’s design offers comprehensive compatibility.

Chord Electronics Qutest DAC

Qutest is Chord's ‘pure’ DAC (it does not contain headphone amplification or rechargeable batteries like some of its range stablemates) and is designed to improve sound quality in the home. It is the latest evolution of their most affordable standalone DAC, the multi-award-winning 2Qute, which it directly replaces.

Chord Electronics 2yu Digital Interface

2yu is an advanced designed-for-2go digital interface enabling 2go as a fully-fledged standalone streamer, ready to be used with external DACs and devices, including the 768-kHz upscaling Hugo M Scaler. 2yu connects directly to 2go to add TOSLINK optical S/PDIF, coaxial and BNC (both 75 ohms) digital outputs, plus a cleverly integrated USB-A output.

Michell Standard Gyro Arm Plate

Michell can supply a range of arm plates for use on their turntables. Standard patterns include Rega, SME, Linn, Hadcock and Graham.

Michell Big Mother Binding Posts - Pack of 4

Please Note: This listing is for a pack of 4. Michell's ‘Big Mother’ binding posts are gold-plated ultra high quality speaker terminals that need a 5mm hole for mounting and can cope with panels up to 18mm thick. Consisting of a handy large knurled screw-fit with integral solder lug, they come supplied with the necessary isolation washers and nuts.

Michell Banana Plugs - Pack of 4

Please Note: This listing is for a pack of 4. Michell's 4mm banana plugs are milled from brass and then gold plated. They are also colour coded.

Michell Orbe Clamp Kit

To bring all of the added benefit of the Orbe screw-down record clamp to GyroDec and Gyro SE owners, the Orbe Clamp Kit contains a new, threaded record spindle that can be easily retro-fitted to the main bearing body.

Michell VTA Adjuster 3

Please Note: This is compatible with Rega tonearms using the redesigned three point fixing base such as the RB220, RB330. The Michell VTA adjuster 3 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell VTA Adjuster 2

Please Note: This is compatible with Rega tonearms and derivatives using the original three point fixing base such as the RB202, RB303. The Michell VTA adjuster 2 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell TecnoArm 2 Tonearm

The TecnoArm 2 is designed to offer a truly audiophile listening experience at exceptional value for money and easily competes with tonearms at three times the price.

Michell TecnoDec Turntable

Please Note: Turntable does not include tonearm or cartridge. Supplied with a Rega profile armplate. The TecnoDec is Michell's entry-level turntable, and shares many features developed for its bigger sibling, the GyroDec, such as the vibration dampening, impedance-matched platter, inverted oil circulating main bearing and a free-standing motor unit. Key Features: Pure Sorbothane feet inserts. Impedance-matched platter. Free standing motor unit. Inverted oil circulating main bearing.

Rega Ania Pro Moving Coil Cartridge - Rebuild

This product requires your old Rega Ania Pro Moving Coil Cartridge to be sent to us for rebuild and is NOT a new cartridge. Please send your cartridge with your order web reference to:HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ

Rega Ania Pro Moving Coil Cartridge

Please Note: At the request of the manufacturer this item cannot be supplied by mail order - it can only be collected in store. The latest member of the Rega MC cartridge range the Ania Pro uses an advanced Vital profile nude diamond stylus. This profile is designed to extract as much detail from the vinyl surface as possible. The Ania Pro delivers tight bass warm midranges and accurate top end frequencies to offer a well balanced and detailed performance.

Atacama Moseco XL 600 Speaker Stands

Introducing the flagship of the Moseco range, the Moseco XL speaker stands are supplied as matched pairs and feature a substantial 5mm thick, 200mm wide by 275mm deep carbon steel top plate specifically designed to support large bookshelf style speakers.  Please Note: Four domed isolation gel pads are also included with each top plate to protect and dampen the cabinet of the supported speaker. The XL600 has a overall height of 620mm excluding floor spikes and gel pads.

Atacama Moseco XL 500 Speaker Stands

Introducing the flagship of the Moseco range, the Moseco XL speaker stands are supplied as matched pairs and feature a substantial 5mm thick, 200mm wide by 275mm deep carbon steel top plate specifically designed to support large bookshelf style speakers.  Please Note: Four domed isolation gel pads are also included with each top plate to protect and dampen the cabinet of the supported speaker. The XL500 has a overall height of 520mm excluding floor spikes and gel pads.

Atacama Moseco/NeXXus Large Top Plate Pack - 160mm x 220mm

If you are looking to own a pair of the Award winning Atacama Moseco & NeXXus Series speaker stands but are finding that the standard 130mm x 170mm top plates are too small for your requirements, Atacama now offer this 160mm x 220mm Optional Top Plate pack for when larger bookshelf style speakers need to be accommodated. Please Note: Each pack consists of two top plates so only one pack is required per pair of Moseco/Nexxus speaker stands.

Atacama Moseco 10 Speaker Stands

Moseco speaker stands combine all the aesthetic and sonic Benefits of Bamboo with the adaptability, strength and stability of twin carbon steel poles. These poles consist of a 50mm front column and a 28mm rear column which features cable management. Please Note: All Moseco’s come with adjustable M8 floor spikes and mini gel pads that can be fitted to the top plate to protect the base of your loudspeakers.

Atacama Moseco 7 Speaker Stands

Moseco speaker stands combine all the aesthetic and sonic Benefits of Bamboo with the adaptability, strength and stability of twin carbon steel poles. These poles consist of a 50mm front column and a 28mm rear column which features cable management. Please Note: All Moseco’s come with adjustable M8 floor spikes and mini gel pads that can be fitted to the top plate to protect the base of your loudspeakers.

Atacama Moseco 6 Speaker Stands

Moseco speaker stands combine all the aesthetic and sonic Benefits of Bamboo with the adaptability, strength and stability of twin carbon steel poles. These poles consist of a 50mm front column and a 28mm rear column which features cable management. Please Note: All Moseco’s come with adjustable M8 floor spikes and mini gel pads that can be fitted to the top plate to protect the base of your loudspeakers.

Atacama Moseco 5 Speaker Stands

Moseco speaker stands combine all the aesthetic and sonic Benefits of Bamboo with the adaptability, strength and stability of twin carbon steel poles. These poles consist of a 50mm front column and a 28mm rear column which features cable management. Please Note: All Moseco’s come with adjustable M8 floor spikes and mini gel pads that can be fitted to the top plate to protect the base of your loudspeakers.

Atacama Audition 700 Speaker Stands

The Audition Series Speaker stands have a large 360mm by 225mm laser cut top plate and can be used with either dimension being front facing. This allows both large, wide but shallow speakers to be supported as well as the more numerous deep cabinet types. Please Note: Floor spikes and HLT Isolation Gel pads are included with each pair of stands.

Atacama Audition 600 Speaker Stands

The Audition Series Speaker stands have a large 360mm by 225mm laser cut top plate and can be used with either dimension being front facing. This allows both large, wide but shallow speakers to be supported as well as the more numerous deep cabinet types. Please Note: Floor spikes and HLT Isolation Gel pads are included with each pair of stands.

Atacama Audition 500 Speaker Stands

The Audition Series Speaker stands have a large 360mm by 225mm laser cut top plate and can be used with either dimension being front facing. This allows both large, wide but shallow speakers to be supported as well as the more numerous deep cabinet types. Please Note: Floor spikes and HLT Isolation Gel pads are included with each pair of stands.

Atacama Audition 400 Speaker Stands

The Audition Series Speaker stands have a large 360mm by 225mm laser cut top plate and can be used with either dimension being front facing. This allows both large, wide but shallow speakers to be supported as well as the more numerous deep cabinet types. Please Note: Floor spikes and HLT Isolation Gel pads are included with each pair of stands.

Atacama Audition 300 Speaker Stands

The Audition Series Speaker stands have a large 360mm by 225mm laser cut top plate and can be used with either dimension being front facing. This allows both large, wide but shallow speakers to be supported as well as the more numerous deep cabinet types. Please Note: Floor spikes and HLT Isolation Gel pads are included with each pair of stands.

Atacama SLX 1000 Speaker Stands

The SLX Series is Atacama's professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required. Please Note: Floor spikes and HLT Isolation Gel pads are included with each pair of stands.

Atacama SLX 700 Speaker Stands

The SLX Series is Atacama's professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required. Please Note: Floor spikes and HLT Isolation Gel pads are included with each pair of stands.

Atacama SLX 600 Speaker Stands

The SLX Series is Atacama's professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required. Please Note: Floor spikes and HLT Isolation Gel pads are included with each pair of stands.

Atacama SLX 500 Speaker Stands

The SLX Series is Atacama's professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required. Please Note: Floor spikes and HLT Isolation Gel pads are included with each pair of stands.

Atacama SLX 400 Speaker Stands

The SLX Series is Atacama's professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required. Please Note: Floor spikes and HLT Isolation Gel pads are included with each pair of stands.

Atacama SLX 300 Speaker Stands

The SLX Series is Atacama's professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required. Please Note: Floor spikes and HLT Isolation Gel pads are included with each pair of stands.

Atacama SLX 200 Speaker Stands

The SLX Series is Atacama's professional range of speaker stands available in a wide range of height options and caters for when a larger top plate is required. Please Note: Floor spikes and HLT Isolation Gel pads are included with each pair of stands.

Rega Planar 8/10 Turntable Wall Bracket

A custom ultra lightweight 2mm aluminium wall bracket designed specifically for the latest Planar 8/10 turntables. The wall bracket will deliver the best performance from your turntable by providing complete isolation.

Rega Strobe Kit

This accessory is designed to evaluate the speed of any turntable. The hand-held strobe unit generates a 100 Hz pulsed light source for use with the supplied 180-line stroboscopic disc.

Rega RB880 Tonearm

Designed using the latest 3D CAD & CAM technology,the new RB880 is the culmination of almost 40 years of tonearm design experience. This tonearm features a new aluminium vertical bearing housing, a redesigned sleeve and vertical bearing shaft (both manufactured from stainless steel) to improve mounting stability and overall rigidity.

Rega Apheta 3 Moving Coil Cartridge - Rebuild

This product requires your old Rega Apheta 3 Moving Coil Cartridge to be sent to us for rebuild and is NOT a new cartridge. Please send your cartridge with your order web reference to:HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ

Rega Apheta 3 Moving Coil Cartridge

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you purchase this item, you can choose to collect it from our store or arrange a home installation. Apheta 3 features a super high-powered, neodymium magnet and a coil meticulously hand wound on an iron cross that is fifty percent smaller than the MK1 model. This weight reduction allows us greater freedom to track the vinyl groove.   The Apheta 3 is housed within a completely redesigned, single piece, aluminium anodised body and protected by a CAD designed, smoked rigid cover to protect the internal fine wires, making handling whilst fitting, safe and risk free.   Key Features: Iron cross & coil assembly 50% smaller than the original Apheta. One of the world's smallest MC generators. Cutting edge neodymium magnet. Fine Line profile nude diamond stylus. High specification fine wire.

Rega Aura Reference Moving Coil Phono Preamplifier

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you purchase this item, you can choose to collect it from our store or arrange a home installation.   The reference Aura MC stage is the culmination of decades of electronic design development. We have created the ultimate, fully adjustable, three stage, all symmetrical pre-amplifier designed purely to extract the very best performance from your moving coil cartridge and vinyl playback system.

Rega Aethos Integrated Amplifier

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you purchase this item, you can choose to collect it from our store or arrange a home installation.   The Aethos stereo amplifier is housed in a brand new custom designed case. Employing four 160 W 16 Amp output transistors per channel, this delivers 156 W per channel into 6 Ω. The Aethos is a dual mono design using a custom wound toroidal transformer and regulated supplies for the sensitive amplification and driver stages. The pre-amplifier stage uses class-A discrete circuitry throughout. The Aethos is a no compromise product with one goal, to deliver your music as faithfully as possible. The Aethos has been built to Rega’s high standards of reliability and quality to ensure many years of musical enjoyment.

Rega RB330 Stainless Steel Counterweight

Replacement counterweight for the RB330 tonearm.   Please Note: The RB330 tonearm comes as standard on the following turntables. Planar 3 - Mild Steel Planar 6 - Stainless Steel This counterweight is also compatible with the RB303 tonearm.

Chord Electronics HUGO M Scaler

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. The Hugo M Scaler is a highly advanced standalone upscaler capable of redefining sound quality from digital audio. It uses unique filter technology, the most advanced in the world, to upscale standard 44.1kHz digital audio up to 705.6kHz (16x CD’s 44.1kHz native resolution), ready to be passed to a suitable DAC; Hugo M Scaler extends its upscaling performance to 768kHz (from 96kHz input data) for dual-BNC-input DACs: DAVE, Qutest and the new Hugo TT 2.

Rega Smoked Turntable Lid

Replacement smoked lid for a Planar 6 turntable, supplied hinged with a Rega badge.   Smoked GPPS material (do not use cleaning fluids, only use a damp clean cloth if necessary).   Dimensions: 445 x 360 x 68mm ish. (W/D/H)

Rega PS2 Replacement Power Supply (100mA)

Replacement power supply for Rega's RP3, Fono Mini A2D and PL1, PL2, Planar 3 turntables.

Rega PS1 Replacement Power Supply (350mA)

Replacement power supply for Rega's Ear, Fono, TT PSU, PL1 plus turntables.

Rega Planar 78 Turntable

The single speed Planar 78 has been designed and engineered to achieve outstanding performance way beyond the expectations of a product at this price point. Using Rega's latest 24v motor technology, the new Planar 78 is also fitted with the latest RB220 precision tonearm.   Excellent build quality, reliability and ease of use combine to make a product which, will offer you a lifetime of musical enjoyment. 

Rega Fono Mini A2D V2 Moving Magnet Phono Preamplifier

The Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use.   The Fono Mini A2D amplifier offers exceptional performance and incredible value for money and promises to be a valuable addition to any hi-fi set up.

Chord Electronics HUGO TT 2 DAC/Preamp/Headphone Amplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Hugo TT 2 has been radically redesigned from the ground up, not only with beautiful new casework by Chief Designer, John Franks, but with 5x the processing power of the original Hugo TT and double that of the multi-award-winning Hugo 2. Hugo TT 2 distils over 20 years of digital development by Rob Watts and takes advantage of the very latest technology.

Rega RB110 Mild Steel Counterweight

Replacement counterweight for the RB110 tonearm.   Please Note: The RB110 tonearm comes as standard on the following turntables. Planar 1 Planar 1 Plus This counterweight is also compatible with the RB101 tonearm.

Chord Electronics Etude Power Amplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. The multi-award winning Chord Electronics Choral family of products has never sounded so good. Welcome Étude to the table, a 150w Class AB stereo power amplifier featuring the first fundamentally new topology since Chord Electronics’ inception in 1989, using highly advanced technologies seen within the aerospace industry.

Atacama HMS 2X 600 Speaker Stands

The Atacama HMS 2.1 (High Mass Stand 2.1) was developed with the co-operation and expertise of ProAc, one of Britain’s most highly respected speaker manufacturers and features a large 200mm x 225mm top plate.

Rega Three Point Tonearm 2mm VTA Spacer

A 2mm stainless spacer, laser cut from 2mm stainless steel or anodised black aluminium. Fits all Rega three point tonearms including the 2016 range of Planar turntables. This spacer replaces the previous plastic spacer and offers better performance and support for the tonearm. Please Note: Rega turntables spacers should not be necessary unless you are you using an exceptionally deep bodied cartridge from another manufacturer.

Rega Extra Heavy Tungsten Counterweight

Extra heavy counterweight.

Rega RB300/700 Tungsten Counterweight

Replacement counterweight for the RB300 and RB700 tonearms.

Rega RB220 Mild Steel Counterweight

Replacement counterweight for the RB220 tonearm.Please Note: The RB220 tonearm comes as standard on the following turntables. Planar 78 Planar 2 This counterweight is also compatible with the RB202 tonearm.

Rega Ania Moving Coil Cartridge - Rebuild

This product requires your old Rega Ania Moving Coil Cartridge to be sent to us for rebuild and is NOT a new cartridge. Please send your cartridge with your order web reference to:HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ

Rega Ania Moving Coil Cartridge

Please Note: At the request of the manufacturer this item cannot be supplied by mail order - it can only be collected in store. The Ania was inspired by the success of Rega's Apheta and Aphelion MC models. Ania uses the same complex hand wound micro coil found in the rest of the range, and is housed in a unique PPS highly rigid body. This body is an exceptionally accurate design that includes Rega’s three point fixing to optimise connection to the tonearm headshell and automatically sets overhang when fitted to a Rega tonearm. The new body is protected by a CAD designed, clear rigid cover to protect the internal fine wires, making handling whilst fitting, safe and risk free. The Ania features a super high-powered, neodymium magnet and a coil meticulously hand wound on to an iron micro cross. This miniature assembly allows greater freedom to track the vinyl groove ensuring even more detail is extracted from the vinyl.   Key Features: Iron micro cross assembly One of the worlds smallest MC generators Cutting edge high power Neodymium magnets Elliptical profile stylus Aluminium cantilver Coil constructed from 0.018 mm fine wire Lifetime warranty against manufacture defects

Chord Electronics Hugo 2 Portable DAC/Headphone Amplifier

Hugo 2 can be used both at home and on-the-go, either with headphones or within a conventional audio system. Its line-level output and full-function remote control adds real flexibility in full-size and desktop systems. The device offers four digital inputs (optical, coaxial and HD USB) plus extended-range Bluetooth, with high-resolution file playback up to 768kHz and up to DSD512 (Octa DSD), via its HD USB input. Analogue outputs include 2x RCA, plus 3.5mm and 6.35mm headphone outputs.

Rega RB880 Stainless Steel Counterweight

Replacement counterweight for the RB880 tonearm. Please Note: The RB880 tonearm comes as standard on the following turntables. Planar 8 This counterweight is also compatible with the RB808, RB330 and RB303 tonearms.

Rega RB3000 Tungsten Counterweight

Replacement counterweight for the RB3000 tonearm.   Please Note: The RB220 tonearm comes as standard on the following turntables. Planar 10 This counterweight is also compatible with the RB2000 and RB1000 tonearms.

Rega RB330 Tonearm

Rega's team have worked tirelessly to improve every aspect of this new tonearm. Offering improved ergonomics, usability and sonic performance. Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated arm clip and an improved spring housing with easier to read numbers. Other improvements include a Rega made, low capacitance phono cable terminated with high quality 'Neutrik' plugs, improved lower friction, precision horizontal and vertical bearings and a re-designed 100g mild steel balance weight.

Rega RB220 Tonearm

The RB220 is the latest incarnation of Rega's most popular tonearm.   The latest design takes full advantage of their brand new arm tube and the current three point arm mounting system. Each RB220 is meticulously hand assembled, creating a precision crafted tonearm achieving extremely low friction levels and performance way beyond the expectations of a product at this price point.

Rega Turntable Wall Bracket Adaptors 2012

Aluminium push fit adaptors for the Rega turntable wall bracket allowing both the RP8 and RP10 to be used with the bracket. Please note : These adaptors only fit the older style Rega wallbracket - new adaptors are available for the current 2016 wall bracket.

Rega Turntable Wall Bracket Adaptors 2016

The new wall bracket adaptors are designed for use on the latest version of Rega's wall bracket. These allow the RP6, RP8 and RP10 models to be mounted directly to the new bracket. Optional rubber pads are included to provide extra grip, especially if using the rigid foot mount kit which is available for the RP8 and RP10 models. Please Note - These adaptors are required to mount the RP6, RP8 and RP10 models on the new wall bracket.

Rega Turntable Wall Bracket 2016

The ultimate in vibration isolation for your turntable.Please Note: Adaptors for RP6, RP8 and RP10 are sold separately and are not included with the wall bracket.

Rega RB330 Mild Steel Counterweight

Replacement counterweight for the RB330 tonearm.   Please Note: The RB330 tonearm comes as standard on the following turntables. Planar 3 - Mild Steel Planar 6 - Stainless Steel This counterweight is also compatible with the RB303 tonearm.

Rega Apheta 2 Moving Coil Cartridge - Rebuild

This product requires your old Rega Apheta 2 Moving Coil Cartridge to be sent to us for rebuild and is NOT a new cartridge. Please send your cartridge with your order web reference to:HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ

Rega Exact Moving Magnet Cartridge - Rebuild

This product requires your old Rega Exact Moving Magnet Cartridge to be sent to us for rebuild and is NOT a new cartridge. Please send your cartridge with your order web reference to:HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ

Chord Electronics Prima Preamplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. Chord's Prima preamp forms part of the stylish and compact Choral range and has been designed to complement their Mezzo power amps. Despite its compact dimensions and space-saving footprint, the Prima is every bit a pedigree Chord amplifier.

Chord Electronics Dave DAC/Preamp/Headphone Amplifier

Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above. DAVE is the most advanced DAC Chord have ever made. It features the very best conversion technology available, using proprietary techniques never seen before, making DAVE the most advanced DAC/preamp amplifier in the world. DAVE stands for 'Digital to Analogue Veritas in Extremis', a moniker that best reflects the product's capability; a device so advanced and with so few compromises, that it is absolutely truthful in the extreme - a standard that all other DACs on the market simply cannot hope to match.

Rega 24v Motor Upgrade Kit

This kit includes the low noise, low vibration 24v motor designed and developed for Rega's range of multi award winning 24v turntables.   Designed with a simple fixing solution to fit all previous Rega turntables that do not already use 24v technology.

Rega RB808 Tonearm External Rewire

Tonearm rewire - Prices only applicable to original Rega wiring damaged accidentally - other charges may apply.   Price includes supply, fitting cable and full test.   Requires your tonearm to be sent in.

Rega RB303/330/700 Tonearm Internal & External Rewire

Internal and external tonearm rewire - Prices only applicable to original Rega wiring damaged accidentally - other charges may apply.   Price includes supply, fitting cable and full test.   Requires your tonearm to be sent in.

Rega RB101/110/220 Tonearm Internal & External Rewire

Internal and external tonearm rewire - Prices only applicable to original Rega wiring damaged accidentally - other charges may apply. Price includes supply, fitting cable and full test. Requires your tonearm to be sent in.

Rega Carbon Stylus

Replacement stylus for the Rega Carbon MM cartridge.   PLEASE NOTE: This is for the STYLUS ONLY not the complete cartridge.

Rega Carbon Moving Magnet Cartridge

The Rega Carbon is a high quality, moving magnet pick-up cartridge designed to be simple to set up, easy to install and above all, accurately reproduce music. Supplied as standard on the multi-award-winning Planar 1 and Planar 2 turntables, the Carbon performs far beyond its entry level price tag.   Key Features: Carbon cantilever Conical profile Detachable stylus Tracking pressure 2-3 g Output 2.5 mV at 1 kHz Lifetime warranty against manufacture defects The Rega Carbon delivers a punchy performance with tight bass and balanced tonal control. Its wide tracking pressure range makes it a highly tolerant cartridge that is is easy to set-up and simple to use. It features a convenient removable stylus for simple and easy replacement.   Technical Specifications: Output: 2.5 mV @ 1 kHz Stylus: User replaceable Fixing: Standard, two screws Cantilever: Carbon Colour: Black / White Tracking Pressure: 2-3 g

Rega RB78 78RPM Moving Magnet Cartridge - Rebuild

This product requires your old Rega RB78 78RPM Moving Magnet Cartridge to be sent to us for rebuild and is NOT a new cartridge. Please send your cartridge with your order web reference to:HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ

Michell Iso Base

Compatible with the Orbe SE, Gyro SE and TecnoDec the Iso Base is the ideal platform to place your Michell Engineering turntable.   Its inert material characteristic combined with the tenderfeet give it the extra isolation that is necessary for the very best performance from your deck.

Rega Solaris R-Range System Remote Control

The Solaris is the dedicated Rega remote for full size electronics. It is backwards compatible with all older IR Rega products. Light weight and ergonomically designed to fit comfortably in the hand whilst presenting the most commonly used button at your fingertips. NB. Supplied as standard with the new Elicit-R and Saturn-R CD DAC Player.

Michell Locknut and VTA Adjuster Pack

Twin pack consisting of: Finger Locking nut (to suit Rega arms) A Vertical Tracking Angle adjustment sleeve for the Rega RB-250, RB-300 and RB-600 arms, to be used with the new-style Rega arm board Michell have been making since the beginning of 1999.  If used with other turntable brands, slight enlargement of the original Rega mounting hole will be necessary to accommodate the increased diameter of the VTA sleeve.

Michell Cartridge Tags

Michell think that these are the ultimate cartridge tags and they come as standard on their TecnoArm 2.

Michell Silicone Well Fluid

For refilling the well on the Hydraulic Reference and Transcripitors turntables and for fluid damped tonearms such as SME V etc.

Michell Synthetic Turntable Bearing Oil

Michell use a proprietary synthetic oil to lubricate the main bearing in all their turntables. The oil has to be a precise viscosity to enable the inverted bearings to circulate the oil correctly.

Michell Finger Locking Nut

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base such as the RB250, RB300.

Michell UniCover Dust Cover

The UniCover is a great solution for people who have an open style turntable with no hinged lid and want to keep the essential parts of their turntable dust free. Please Note: This is also compatible with the TecnoDec and SE model turntables.

Rega Three Point Tonearm Plastic VTA Spacer

All in one 2mm, 4mm, 6mm and 8mm height adjustment spacer for Rega three point tonearms. When Rega arms are fitted to turntables from other manufacturers it may be necessary to add our "Rega arm spacers" to achieve the correct arm height.

Rega 45RPM Adaptor

The record adaptor has been designed to be used with your 45rpm records that no longer have the centres, enabling you to play your old favourites.   The adaptor is simply fitted over the spindle of your turntable and the record will fit the outside of the adaptor. Then simply sit back, switch on and enjoy the music.

Rega Elys 2 Moving Magnet Cartridge - Rebuild

This product requires your old Rega Elys 2 Moving Magnet Cartridge to be sent to us for rebuild and is NOT a new cartridge. Please send your cartridge with your order web reference to:HiFiSoundCastlegate MillQuaysideStockton on TeesTS18 1BZ

Rega Clear Turntable Lid

Dustcover for all Rega turntables, supplied hinged with a Rega badge.   Clear GPPS material (do not use cleaning fluids, only use a damp clean cloth if necessary).   Dimensions: 445 x 360 x 68mm ish. (W/D/H)   DO YOU REALLY NEED THIS LID? If you are waiting for a NEW REGA turntable to arrive please check whether it comes with a lid already (they usually do). 

Rega Turntable Mat for P9

Rega Turntable Mat for P9 turntable

Rega RB78 78RPM Moving Magnet Cartridge

Hand built mono moving magnet cartridge in Rega's custom body designed specifically for 78rpm record playback.

Michell VTA Adjuster 1

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base, such as the RB250, RB300. The Michell VTA adjuster 1 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell Tenderfeet Large - Pack of 3

Please Note: This listing is for a pack of 3. Made from anodised aluminium, tender feet can be used under any item of audio equipment, to help isolate that item from structural vibrations. Improving the overall audio performance.

Rega Mains Power Lead

This hand assembled Rega mains power lead is constructed with high specification IEC and mains plugs. The cable is constructed from the highest quality 1.5mm² copper conductors with fully earthed, braided & tinned, copper RF screen. This provides the best possible coupling between mains supply and product whilst ensuring low resistance at high current levels. Finally, the transparent outer PVC jacket displays tinned copper braid adding a distinctive visual appearance.

Rega Planar 1&2/RP1/RP78 Turntable Mat

Rega's felt turntable mat.

Michell Hydraulic Reference Drive Belt

Please Note: This will only fit the Hydraulic Reference turntable. All Michell turntable drive belts are made of a proprietary rubber compound, designed to keep your vinyl revolving at precisely the correct speed, while also minimising any vibration transfer from the motor to the turntable.

Michell TecnoWeight

The TecnoWeight is a great upgrade for anyone with a compatible Rega tonearm. This easy to fit counter weight system is made from heavy stainless steel and aluminium.    Please Note: This is compatible with all Rega tonearms and derivatives, except RB100 series tonearms.

Michell SEcure Cover Dust Cover

Available to fit the Orbe SE and Gyro SE, the SEcure Cover has been designed to totally cover the whole deck (platter, motor and arm assembly) and is the best solution to keep your naked Michell Engineering turntable free of dust.

Michell Drive Belt

Please Note: This is for all Michell turntable models except the Reference Hydraulic. All Michell turntable drive belts are made of a proprietary rubber compound, designed to keep your vinyl revolving at precisely the correct speed, while also minimising any vibration transfer from the motor to the turntable.

Michell Orbe Platter Kit

The Orbe Platter Kit offers owners of GyroDecs and Gyro SE’s the opportunity to take their turntables to the next performance level.

Michell GyroDec/Orbe Arm Plate Decoupling Kit

Available to original GyroDec / Orbe owners whose turntable has the arm plate attached using long screws and straight through spacers.   The new assembly isolates the arm plate from the chassis of the turntable using a redesigned arm plate spacer.

Michell Gyro Bearing

Please Note: This is not compatible with an original aluminium GyroDec platter, please upgrade to the impedance matched platter. Contrary to traditional designs, Michell's current main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows them to fully lubricate the inside of the entire bearing while the platter is turning.

Rega Single Point Tonearm 2mm VTA Spacer

Arm Height Adjustment spacer for RB250 and RB300 - size 2mm.   When Rega arms are fitted to turntables from other manufacturers it may be necessary to add Rega arm spacers to achieve the correct arm height.   Circular spacers are available for the RB250 and RB300 in thickness' of 2mm. An arm 'Sleeve nut' is also available for circumstances where the arm base does not protrude below the arm mounting board.   Please Note: Turntable spacers are not necessary on all Rega turntables.

Rega RP3/6/8 Turntable Mat

Replacement felt mat for Rega RP3, 6 and 8 turntables.