Compare

Overview SPL Elector Analog Preamplifier SPL Elector Analog Preamplifier IsoAcoustics Aperta 300 Speaker Stands IsoAcoustics Aperta 300 Speaker Stands Pro-Ject Pick-IT PRO Cartridge Pro-Ject Pick-IT PRO Cartridge
Summary

The Elector is the perfect preamplifier for the lover of pure analog technology. With motorised, remote volume control, tape monitor path, retro-look-VU-meter and the all superior VOLTAiR technology the Elector brings analog sources to new life.

Key Features:

  • Three pairs of balanced inputs with XLR jacks and three standard inputs with gold-plated RCA jacks.
  • The Elector provides two stereo output pairs (1 x XLR, 1 x RCA) for connecting power amplifiers or active loudspeakers.
  • Tape monitor with db switch to reduce high input levels.
  • Two mechanical UV meters with the ability to switch the display for different signal levels.

The Aperta 300, the next member of the acclaimed Aperta series, takes isolation and sound clarity to a new level. Featuring its signature stylized open design and low profile (3.0 inches), the Aperta 300 offers speakers a low stance while enhancing their clarity and performance. The stand’s unique tilt adjustment feature enables the user to dial in the optimum tilt angle, with fine gradation markings provided to match precise angle adjustments on each side.

Please note: This is for a single unit, not a pair.

In recognition of Pro-Ject’s 30th anniversary, Pro-Ject wanted to go back to their roots bringing a new design to their turntables. Not only was a new turntable made, but also a completely new cartridge. Pro-Ject teamed up with Ortofon to develop a unique range of cartridges. With thanks to Ortofon’s excellent manufacturing skills, they were able to produce a very special cartridge: The Pick it PRO.

Key Features:

  • Moving Magnet principle
  • High fidelity
  • Very detailed with low distortion
  • Exceptionally lively & robust
  • Convinces with high a dynamic range
  • Simple and fast mounting
  • 1/2 inch mounting standard
  • Threaded holes for simple mouting without nuts
  • New transparent design
  • Made in Europe
Reference193IS-AP300PJ-PICK-IT-PRO
Specifications
Amplifier Specifications:
Frequency response0 dBu: 10 Hz – 100 kHz
Dynamic range132.5 dB
THD0 dBu, 1 kHz: 0.00179 %
Input impedanceRCA: 47 kΩ
XLR: 20 kΩ
Gain32.5 dBu
Noise-99 dBu
Operation voltageInternal Linear Power Supply with Shielded Toroidal Transformer
Operating voltage for analog audio: +/- 60 V
Operating voltage for relays and LEDs: + 12 V
Output Impedence75 Ω
Analogue Inputs3 x XLR (balanced)
3 x RCA
Analogue Outputs1 x XLR (balanced)
1 x RCA
Crosstalk0 dBu, 1 kHz: -112 dBu
Mains SupplySelectable 230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V: T 0.5 A
Weight4.25kg
DimensionsW x H x D: 278 x 100 x 300 mm
Price
£2,750.00
£159.00
£169.00
Actions
SPL Elector Analog Preamplifier SPL Elector Analog Preamplifier Summary

The Elector is the perfect preamplifier for the lover of pure analog technology. With motorised, remote volume control, tape monitor path, retro-look-VU-meter and the all superior VOLTAiR technology the Elector brings analog sources to new life.

Key Features:

  • Three pairs of balanced inputs with XLR jacks and three standard inputs with gold-plated RCA jacks.
  • The Elector provides two stereo output pairs (1 x XLR, 1 x RCA) for connecting power amplifiers or active loudspeakers.
  • Tape monitor with db switch to reduce high input levels.
  • Two mechanical UV meters with the ability to switch the display for different signal levels.
 193 Specifications
Amplifier Specifications:
Frequency response0 dBu: 10 Hz – 100 kHz
Dynamic range132.5 dB
THD0 dBu, 1 kHz: 0.00179 %
Input impedanceRCA: 47 kΩ
XLR: 20 kΩ
Gain32.5 dBu
Noise-99 dBu
Operation voltageInternal Linear Power Supply with Shielded Toroidal Transformer
Operating voltage for analog audio: +/- 60 V
Operating voltage for relays and LEDs: + 12 V
Output Impedence75 Ω
Analogue Inputs3 x XLR (balanced)
3 x RCA
Analogue Outputs1 x XLR (balanced)
1 x RCA
Crosstalk0 dBu, 1 kHz: -112 dBu
Mains SupplySelectable 230 V AC / 50; 115 V AC / 60 Hz
Fuse for 230 V: T 0.5 A
Weight4.25kg
DimensionsW x H x D: 278 x 100 x 300 mm
£2,750.00
IsoAcoustics Aperta 300 Speaker Stands IsoAcoustics Aperta 300 Speaker Stands Summary

The Aperta 300, the next member of the acclaimed Aperta series, takes isolation and sound clarity to a new level. Featuring its signature stylized open design and low profile (3.0 inches), the Aperta 300 offers speakers a low stance while enhancing their clarity and performance. The stand’s unique tilt adjustment feature enables the user to dial in the optimum tilt angle, with fine gradation markings provided to match precise angle adjustments on each side.

Please note: This is for a single unit, not a pair.

 IS-AP300
£159.00
Pro-Ject Pick-IT PRO Cartridge Pro-Ject Pick-IT PRO Cartridge Summary

In recognition of Pro-Ject’s 30th anniversary, Pro-Ject wanted to go back to their roots bringing a new design to their turntables. Not only was a new turntable made, but also a completely new cartridge. Pro-Ject teamed up with Ortofon to develop a unique range of cartridges. With thanks to Ortofon’s excellent manufacturing skills, they were able to produce a very special cartridge: The Pick it PRO.

Key Features:

  • Moving Magnet principle
  • High fidelity
  • Very detailed with low distortion
  • Exceptionally lively & robust
  • Convinces with high a dynamic range
  • Simple and fast mounting
  • 1/2 inch mounting standard
  • Threaded holes for simple mouting without nuts
  • New transparent design
  • Made in Europe
 PJ-PICK-IT-PRO
£169.00