Amplifier Binding Posts - Pack of 4
Please Note: This listing is for a pack of 4. Gold-plated ultra high quality speaker terminal, for amplifier.
Please Note: This listing is for a pack of 4. Michell's 4mm banana plugs are milled from brass and then gold plated. They are also colour coded.
Big Mother Binding Posts - Pack of 4
Please Note: This listing is for a pack of 4. Michell's ‘Big Mother’ binding posts are gold-plated ultra high quality speaker terminals that need a 5mm hole for mounting and can cope with panels up to 18mm thick. Consisting of a handy large knurled screw-fit with integral solder lug, they come supplied with the necessary isolation washers and nuts.
The Connect-IT E features a "dual twisted pair" technology with a 100% foil shield for rejection of EM and RF interference – the types that cause hum and buzz in your system. Dual twisted pair construction consists of two identical conductors for positive and negative signals that are tightly wrapped around each other. This enables excellent noise rejection that wouldn't be possible with ordinary cables.
The Rega Couple 3 is designed to complement the performance of any hi-fi audio system. The low capacitance cable used for the Couple 3 is constructed using oxygen free copper (OFC) with an ultra-flexible jacket. This cable was originally developed as a critical component used inside the award-winning reference level Aura phono stage. The 80pF capacitance of this cable is matched to Rega's custom tonearm cables used throughout the Rega range. This feature will optimise performance when used between phono stage and amplifier.
To make fast and secure banana connections with Van Den Hul loudspeaker cables. Just strip your loudspeaker cable for 14mm, fold back and screw-on. Strain relief and secured connections are the result. 4 DIY Banana Plugs are blister packed in one package for your ultimate convenience.
To make fast and secure spade connections with Van Den Hul loudspeaker cables. Just strip your loudspeaker cable for 14mm, fold back and screw-on. Strain relief and secured connections are the result. 4 DIY Spade Plugs are blister packed in one package for your ultimate convenience.
4K/60p (18Gbps) High performance HDMI cable with full support for ARC and HDR10, this cable features an oxygen-free copper cable conductor and 24K gold plated and die cast zinc alloy connections.
AIM Electronics Flagship Ultra High Speed Flat HDMI cable - 48Gbps for 8K resolution and HDR10. Crafted as a passive HDMI cable, the FLV HDMI has achieved the highest standard of 8K 48Gbps absolute performance. It utilises a new flat structure to improve extreme boundaries and features PULSHUT®MU from Asahi Kasei Corporation, which is attached to the back of the connector to provide enhanced electromagnetic interference reduction properties. Compatible Standards: CEC eARC* ARC* HDR, HDR10 HLG Dolby Vision
LS-A Ultra High Speed Laser HDMI cable
The AIM Electronics LS-A HDMI cable is a high-performance solution that supports 8K resolution and eARC, with a bandwidth of 48Gbps for optimal signal transmission. The cable's innovative design incorporates a new circuit that eliminates the need for an external power supply, providing a noise-free video and audio signal. This advanced engineering ensures a clean and reliable connection for a superior viewing and listening experience. Compatible Standards: CEC eARC* ARC* HDR, HDR10 HLG Dolby Vision * Depends on the connection of equipment configuration, it may not be output correctly. eARC supported up to 12m.
The AIM Electronics LS3 Ultra High Speed Laser HDMI cable is designed to support the newest HDMI standard with a transmission speed of 48Gbps, enabling 8K resolution and HDR10+. It uses quartz optical fiber to transmit high-resolution video, ensuring it is free from electromagnetic interference. The cable also features a hybrid circuit that eliminates the need for an external power supply. Compatible Standards: CEC eARC* ARC* HDR, HDR10 HLG Dolby Vision * Depends on the connection of equipment configuration, it may not be output correctly. ※ eARC supported up to 12m.
This hand assembled Rega mains power lead is constructed with high specification IEC and mains plugs. The cable is constructed from the highest quality 1.5mm² copper conductors with fully earthed, braided & tinned, copper RF screen. This provides the best possible coupling between mains supply and product whilst ensuring low resistance at high current levels. Finally, the transparent outer PVC jacket displays tinned copper braid adding a distinctive visual appearance.
The NA2 is a high quality Network Interconnect from AIM Electronics. Equipped with the cross frame that is used in the flagship model the NA9, demonstrating high transmission characteristics over a wide range of bands. High-performance shielding inside the cable and modular connector provides flawless noise control.
The NA4 Network Cable from AIM Electronics is a high-performance audio network cable designed to deliver superior sound quality. It features newly developed, high-purity oxygen-free copper conductors for excellent signal transmission. To combat electrical interference, the cable employs a robust triple-layer shielding system, combining a high-performance double-layered aluminum shield with a high-density copper braided shield. This construction effectively controls electromagnetic interference (EMI) and external noise. The cable is further enhanced by noise-resistant, die-cast modular connectors, which ensure a secure and clean connection to your audio equipment.
The NA6 Network Interconnect from AIM Electronics achieves high-dimensional noise control with a high-performance 3-layer shield structure combining of Copper, High density copper and Aluminium. The NA6 has a specially developed inner sheath containing conductive functional material that is also used in the flagship model, the NA9. Designed to be less susceptible to external environment with asymmetric structure of drain wires on both ends of connectors, for optimal performance install the cable in the correct direction as indicated by the arrows on the cable.
The Flagship NA9 Network Interconnect is Equipped with a newly developed 4-layer shield structure "Hoplon" that combines PULSHUT®MU, Copper, High Density Copper & Aluminium Shielding. Each twisted pair is made of Pulshat®MU, a noise-absorbing material. Exclusively developed inner sheath containing conductive functional material.
AIM Electronics' flagship NAX network cable is a premium offering designed for the highest level of audio performance. It features a dedicated conductor made of high-purity oxygen-free copper with a pure silver coating, ensuring excellent signal transfer. To protect this signal, the cable employs a comprehensive, multi-layered shielding system called Hoplon, which includes a copper shield for the audio frequency band, a high-density copper braided shield for the low-frequency range, and an aluminum shield for high-frequency noise. Additionally, the cable incorporates Pulshut®︎ MU technology to actively reduce both internal and external noise. The cable's performance is further enhanced by Air 2, a foamed insulator that minimises dielectric constant and dissipation factor, bringing the insulation closer to the ideal performance of air itself. This asymmetrical design is less susceptible to environmental interference, ensuring a clean and precise audio signal.
The AES-EBU 110 Ohm Professional XLR-XLR Interconnect
Superior transmission quality for balanced digital signals at a 110 Ohm characteristic line impedance.
The Air 3T Bi-Amp Berri Bus Terminated Speaker Cable Pair
Van den Hul has introduced a gold coloured four lead cable in approximately the same diameter as the Fusion Technology The Inspiration, equipped with their new 3T conductors, called 3T The AIR. The 3T The AIR cable can be used for bi-amp (4-4) applications. The Termination is done with Van den Hul's special 3T Rhodium plated berri bus connectors.
The Air 3T Bi-Wire Berri Bus Terminated Speaker Cable Pair
Van den Hul has introduced a gold coloured four lead cable in approximately the same diameter as the Fusion Technology The Inspiration, equipped with their new 3T conductors, called 3T The AIR. The 3T The AIR cable can be used for bi-wire (2-4) applications. The termination is done with Van den Hul's special 3T Rhodium plated berri bus connectors.
The Air 3T Stereo Berri Bus Terminated Speaker Cable Pair
Van den Hul has introduced a gold coloured four lead cable in approximately the same diameter as the Fusion Technology The Inspiration, equiped with their new 3T conductors, called 3T The AIR. The 3T The AIR cable can be used for stereo (2-2) applications. The termination is done with Van den Hul's special 3T Rhodium plated berri bus connectors.
The design aim of The ARCTIC was to produce a very affordable twin lead loudspeaker cable with a very good sonic quality despite its (extremely reasonable) price. This product is priced and available to buy by the metre. The ARCTIC is made of 2 conductor groups, each with 147 x 0.16 mm. strands. The total cross-section area per conductor is 3,31 mm²; close to AWG 12. The conductor material is a very high grade large crystal OFC with a dense pure silver coating. The external dimensions are 12.5 x 6,0 mm. The white jacket is made of HULLIFLEX ® 4, a superior insulation material exhibiting a very good mechanical protection and a high chemical stability. The two conductors have different insulator shapes: one is round and the other has two edges with type printing on the flat surface: the most simple polarity finder you can think of.
The Bay C5 RCA-RCA Interconnect
Due to the large success of Van Den Hul's Patchbay B5 in its use as a general purpose audio interconnect, they have introduced the Bay C5 Hybrid - The coaxial (unbalanced) hybrid version of their balanced Patchbay B5. Key Features: The coaxial construction is made with a centre conductor consisting of 40 x 0.12 mm. strands exhibiting an effective cross section area of 0.452 mm² (AWG 20.6) and a resistance of 3.8 Ohm/100 meter The centre conductor is coated with a layer of LSC and is insulated with foamed polyethylene The cable capacitance is 110 pF/m The double screen is made of a 16 x 6 x 0.12 mm. stranded braid with a Linear Structured Carbon® saturated layer underneath to further close the cable against HF signals and to dramatically improve the signal quality. The total resistance of the screen is 1.6 Ohm/100 metre The external 5.2 mm. diameter jacket is made of red colored Hulliflex® 4, a material with superior properties to PVC Hulliflex® gives the Bay C5 Hybrid a very long life span without any ageing effects
With the design of The Clearwater, it was Van den Hul's intention to produce the best match between quality and price. The decision was taken to work with 2 groups of strands with a conductor size of AWG 14; because in many situations the distance between the amplifier and the loudspeakers is limited. How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m. We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.
The Cliff 3T RCA-RCA Interconnect
This model was developed with a quad (4 conductors) center construction screen-free. This enabled Van den Hul to reduce the capacitance and produce one of the most flexible interconnects available. Design purpose: Interlink Connections: Unbalanced (RCA) Conductor material: 3T Sand-Coloured Jacket Halogen Free
The CS-122 Hybrid Speaker Cable
Twin-lead version of the CS - 12 HF (2x AWG 12). Flat loudspeaker cable, with a L.S.C.® saturated coating around the two dense silver coated very pure copper conductors. With durable HULLIFLEX® cream jacket with gold printing. How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m. We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.
The CS-122 Stiff Mantle Speaker Cable
Twin-lead version of the CS - 12 HF (2x AWG 12). Flat loudspeaker cable, with a L.S.C.® saturated coating around the two dense silver coated very pure copper conductors. With durable Hulliflex® cream jacket with gold printing. The Stiff Mantle version is more rigid than the normal CS-122. How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m. We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.
Loudspeaker cables are mostly difficult to move through tubes from the power-amp to the rear loudspeakers. With this problem in mind, Van Den Hul came up with a twin-lead FEP insulated loudspeaker cable. How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m. We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.
The D-102 MK III RCA-RCA Interconnect
With our ever continuing technical improvements, it is logical to replace the already since 1982 available D - 102 Series (after 24 upgrades in the meantime) by an actual HYBRID version. Together with our Linear Structured Carbon ® technology, we have therefore applied some number of strands from our highly acclaimed 3T-technology into the new D-102 III Hybrid.
The D-102 MK III XLR-XLR Interconnect
The D–102 MK III is a warm yellow-orange coloured very flexible balanced interconnect with a 3 layer shielding. Design purpose: Interlink Conductor material: Silver with 4 strands of 3T Jacket colour: Yellow The jacket is made of Hulliflex, a PVC and Halogen Free material without plasticisers. Industry standard Neutrik silver plated connectors. Halogen Free XLR to XLR
The D-501 Hybrid TAC180-RCA Interconnect
The D–501 Hybrid is a cable with a very high shielding factor. Sonically this is one of the best cables in the Van den Hul program. The 2 signal lines are made each of 19 x 0.1 mm. very high grade OFC wires with the highest density of very pure silver coating. This cable is fitted with TAC 180° - RCA connections.
The D-501 Silver Hybrid TAC180-RCA Interconnect
Same construction as the D -501 Hybrid, however, the two inner multistrand conductors are made of the highest grade Matched Crystal Silver. With durable black HULLIFLEX outer jacket. The D–501 Silver Hybrid is a cable with a very high shielding factor. Sonically this is one of the best cables in the Van den Hul program. The 2 signal lines are made each of 19 x 0.1 mm. very high grade OFC wires with the highest density of very pure silver coating. This cable is fitted with TAC 180° - RCA connections. Technical Specifications As an extra layer around the metal group, we use a Linear Structured Carbon ® (LSC) saturated coating. The signal line insulation with the colours white and yellow is made of cell-PE, so the stripping can even be done with your fingernails to prevent wire damage on the silver coated copper strands commonly caused by mechanical stripping. The resistance per signal lead is: 11.3 Ohm/100 meter. The capacitance between the 2 signal leads is: 75 pF/meter. Very flexible specially treated artificial fibres are used as a filler to prevent any harm caused by external humidity or chemicals. The shielding consists of 96 x 0.10 mm. wires of a high grade Matched Crystal (MC) OFC with a dense and very pure silver coating and a LSC saturated helical tape. The resistance of the shielding is: 2.3 Ohm/100 meter. The very flexible black outer jacket is made of migration-free HULLIFLEX ® to prevent any chemical deterioration over a long period. The type printing repeats every 25 cm. (10″) to make cutting of specified lengths easy.
The D-502 Hybrid TAC180-RCA Interconnect
The D–502 Hybrid's sound quality is extremely detailed without any metallic character. The D–502 Hybrid is equipped with a centre steel wire to provide extra mechanical reinforcement and strain relief. This coated steel wire, can be soldered and used as an extra ground-lead. The total pulling force handling of just this centre wire is already more than 30 kg. TAC180-RCA Version
The D-502 Hybrid TAC90-RCA Interconnect
The D–502 Hybrid's sound quality is extremely detailed without any metallic character. The D–502 Hybrid is equipped with a centre steel wire to provide extra mechanical reinforcement and strain relief. This coated steel wire, can be soldered and used as an extra ground-lead. The total pulling force handling of just this centre wire is already more than 30 kg. TAC90-RCA Version
The D300 MK III RCA-RCA Interconnect
High quality coaxial Hybrid L.S.C. coated audio interlink. In a metallic brown coloured durable HULLIFLEX jacket. With 4 gold-plated RCA connectors.
High quality twin-lead (2x AWG 10) flat loudspeaker cable with a L.S.C.® saturated coating around the two heavy silver coated multistrand copper conductors. With durable HULLIFLEX® jacket, brown metallic coloured with gold printing. Usable Connectors: B-352, BC-8.3 or D.I.Y. How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m. We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.
The D501 Silver Hybrid TAC90-XLR Interconnect
A special edition of the D501 Hybrid, The D501 Silver Hybrid stranded signal lines are made of highest grade Matched Crystal Silver. This mat black Hulliflex® jacketed balanced cable was designed to support the tone-arm and mixing console industry: very flexible and with extremely good electrical qualities with a very high shielding factor. Sonically this is one of the best cables in the Van den Hul program. This cable is fitted with TAC90 - XLR connections.
The Digi-Coupler 75 Ohm BNC-BNC Interconnect
Van den Hul's special request designed very low radiation digital interconnect. An amazing 126 dB radiation damping at 1 GHz and 84 dB damping at 4 GHz. The impedance is 75 Ohm +/- 0,5 Ohm till 4 GHz. The ideal electrical link between any 75 Ohm source and 75 Ohm load. Think about player-converter connections. With durable gold tone HULLIFLEX jacket and 2 gold-plated 9 mm BNC connectors.
The Digi-Coupler 75 Ohm RCA-RCA Interconnect
Van den Hul's special request designed very low radiation digital interconnect. An amazing 126 dB radiation damping at 1 GHz and 84 dB damping at 4 GHz. The impedance is 75 Ohm +/- 0,5 Ohm till 4 GHz. The ideal electrical link between any 75 Ohm source and 75 Ohm load. Think about player-converter connections. With durable gold tone HULLIFLEX jacket and 2 gold-plated RCA connectors.
The First Metal Screen RCA-RCA Interconnect
The conductor is made of Van den Hul's exclusive Linear Structured Carbon (LSC), metal shielded with dense braided high quality metal. With durable apricot HULLIFLEX jacket and 4 gold-plated RCA connectors. Box packed.
The First Ultimate MK II RCA-RCA Interconnect
The centre conductor is made of Linear Structured Carbon. Outer braiding, functioning as screen and signal return, is made of 6 layers of braided LSC fibres. With durable light yellow HULLIFLEX jacket and with 4 gold-plated RCA connectors. Box packed.
Twin-lead (2x AWG 14) loudspeaker cable like the original CLEARWATER, but with a special gold coloured durable HULLIFLEX® jacket which provides extra protection against ultraviolet (UV) radiation from the sun. Usable Connectors: B-122, BC-6.5 or D.I.Y. How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m. We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.
The HDMI Flat 180 Interconnect
Van den Hul's The VDH HDMI Flat 180, a high quality flat shaped HDMI cable with 180 degree swivel connector, is fully compliant with the HDMI High Speed standard up to 5 meters (1080i up to 15 meters) and offers effortless performance.
The HDMI Flat HEAC Interconnect
Following the latest specifications introduced by the official HDMI organization Van Den Hul are proud to introduce The HDMI Flat HEAC: a new high quality flat shaped HDMI cable that is fully compliant with the HDMI High Speed with Ethernet specification for lengths up to 10.0 meter.
The HDMI Flat SE is a special edition of our HDMI Flat HEAC. Offering exceptional performance and value for money, The VDH HDMI Flat SE delivers clear sharp images, accurate color definition, vivid contrast and an infinity of fine detail up to the highest video resolutions. Sound at any digital format is matchless. Key Features: Fully compliant with the HDMI™ High Speed & Ethernet specification for lengths up to 3.0 meter. Supports display resolutions up to 4096 x 2160; warranted for lengths up to 3.0m. High-quality HDMI ‘Type A’ connectors with heavy gold plated contacts provide solid and reliable connections. High-density-coated Oxygen Free Copper conductors warrant minimum signal attenuation. In addition to the cable’s Hulliflex® jacket, the internal conductors’ special coating adds extra protection against aggressive environmental conditions. 4K HDR (HDMI 2.0b) capable Conductor material: Tin plated OFC
The HDMI Ultimate 4K Interconnect
Flawlessly transferring the HDMI™ High Speed (2.0b) standard’s gigantic amount of digital data of gigabits per second over distances in excess of 15 meters is at the near limits of conventional cable technology. Achieving such without the help of signal repeaters requires deployment of the best materials and maximum manufacturing precision, or else the extremely high frequency signals transferred merely end in a blur.
The Hill 3T RCA-RCA Interconnect
With the design idea to reduce the capacitive load between the two centre conductors, the dimension of the 3T The Hill Hybrid is made bigger compared to the 3T The Rock Hybrid. The 2 centre conductors consist each of a single 500 micron 3T conductor also coated with a L.S.C. layer to improve the sonic quality. The shielding, 2 layers heavy silver coated, is made of multiple copper strands and 1 extra layer of L.S.C in between. The 3T The Hill Hybrid has a remarkable spacious and clean sound character without any noticeable distortion. With 4 rhodium plated RCA connectors.
The Hill 3T XLR-XLR Interconnect
With the design idea to reduce the capacitive load between the two centre conductors, the dimension of the 3T The Hill Hybrid is made bigger compared to the 3T The Rock Hybrid. The 2 centre conductors consist each of a single 500 micron 3T conductor also coated with a L.S.C. layer to improve the sonic quality. The shielding, 2 layers heavy silver coated, is made of multiple copper strands and 1 extra layer of L.S.C in between. The 3T The Hill Hybrid has a remarkable spacious and clean sound character without any noticeable distortion. With 4 black Neutrik silver plated XLR connectors.
The Integration RCA-RCA Interconnect
Based on Van den Hul's Fusion Technology, Triple screened quadruple core / star quad (balanced). With durable gold tone HULLIFLEX jacket and 4 gold plated RCA connectors.
The Isis RCA-RCA Tonearm Interconnect
The ISIS is a twin line RCA to RCA coaxial interconnect, especially designed to provide superior signal transfer quality between your high-end turntable and pre-amplifier at a very affordable price. Where high-end turntables often are supplied with meagre interconnects, significant improvements in sound quality, resolution and imaging can be achieved by upgrading to The Isis.
Many amplifiers and A/V Receivers are equipped with a separate pre and power amplifier part because of the extra opportunities such a separation offers, such as connecting a subwoofer or extra amplifiers. Connect those parts with The Link and you will immediately hear sound improvement. The sound reproduction will spectacularly gain air, detail and dynamic.
This 8.0 mm special quality powercable is the lower current (12 Amp.) version of Van den Hul's 20 Ampere The Mainsstream Hybrid (BS). With gold-coloured durable HULLIFLEX jacket and 12 Ampere filtering power cord, 7 strands, shielded. Outer diameter 8 mm.
The Mainsstream BS Power Cable
Thinner version of The MAINSSTREAM HYBRID and with the same filtering technology of wideband spurious signals. Outer diameter 12.5 mm and current handling over 20 Ampere. With gold-coloured durable HULLIFLEX jacket.
The Mini Sub RCA-RCA Subwoofer Interconnect
The MINISUB Hybrid typically has been designed as an active subwoofer cable. It is extremely flexible, and has an attractive cream coloured jacket that blends easily in any interior, making it very suitable for longer length subwoofer cable applications and all other interconnections where there is need for a very flexible, price-efficient cable. Available as a single lead, box packed and terminated with 2 gold-plated high quality RCA connectors.
The Mountain 3T RCA-RCA Interconnect
Van den Hul's top model 3T interconnect with the highest sonic quality. The two centre conductors are each made of 0.9mm diameter 3T conductors and each coated with an extra L.S.C. layer. To reduce the capacitive load by the shielding, Van den Hul have enlarged the distance between the two 3T centre conductors and the shielding. This shielding is made of even 4 layers. Two are made of heavy silver coated high quality copper multistrand constructions and the other two are made of L.S.C. layers. After a run-in time of 3 - 5 hours, you will be very surprised about the huge step- up in the sound quality without changing any other component. The feeling to be "there where the recording is made" will be very strong. With 4 rhodium plated RCA connectors.
The Mountain 3T XLR-XLR Interconnect
Van den Hul's top model 3T interconnect with the highest sonic quality. The two centre conductors are each made of 0.9mm diameter 3T conductors and each coated with an extra L.S.C. layer. To reduce the capacitive load by the shielding, Van den Hul have enlarged the distance between the two 3T centre conductors and the shielding. This shielding is made of even 4 layers. Two are made of heavy silver coated high quality copper multistrand constructions and the other two are made of L.S.C. layers. After a run-in time of 3 - 5 hours, you will be very surprised about the huge step- up in the sound quality without changing any other component. The feeling to be "there where the recording is made" will be very strong. With 4 black Neutrik silver plated XLR connectors.
High Quality 7.3 mm diameter, 75Ω coaxial interconnect cable with a double screen and a solid core. The core and the screen are made from pure silver coated OFC. The insulation is made of HULLIFLEX and has a cream colour. With 4 gold-plated RCA click-on connectors.
The Optocoupler MK II TOS-TOS Interconnect
Optical fiber cable never has any problems normally caused by e.g. external electrical and/or magnetic interference. Optical fiber is free from any deterioration. Convex shaped fiber ends reduce insertion losses to a minimum. Data transmission capacity: > 250 Megabit/second.
The Orchid RCA-RCA Interconnect
The Orchid is a slim but very robust, 2.9 mm diameter, three conductor (balanced) interconnect equipped with a solid core centre conductor designed for maximum sonic performance. (The cable’s construction ensures that the core is virtually unbreakable). In The Orchid only the highest quality materials are used: The purest and most carefully processed dense Silver coated Matched Crystal Oxygen Free Copper conductors. Lossless and extremely stable insulation materials. A rugged HULLIFLEX ® jacket. Slim 2.9 mm diameter RCA type connector terminated version for single-ended (unbalanced) audio connections
The Orchid XLR-XLR Interconnect
The Orchid is a slim but very robust, 2.9 mm diameter, three conductor (balanced) interconnect equipped with a solid core centre conductor designed for maximum sonic performance. (The cable’s construction ensures that the core is virtually unbreakable). In The Orchid only the highest quality materials are used: The purest and most carefully processed dense Silver coated Matched Crystal Oxygen Free Copper conductors. Lossless and extremely stable insulation materials. A rugged HULLIFLEX ® jacket. Slim 2.9 mm diameter XLR terminated version for balanced connections
The Revelation Hybrid Speaker Cable
A heavy duty, very high quality single lead loudspeaker cable, with a multistrand conductor, an extra internal layer of L.S.C.® and a ring of 16 separately insulated strands. The diameter is 12.5 mm. In red durable HULLIFLEX® jacket with gold printing. Usable Connectors: B-352 or BC-13.2 mm. How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 40m. We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.
The River 3T RCA-RCA Interconnect
Van den Hul's coaxial entry level interconnect model with both centre core and shielding made of 3T conductors. The centre conductor is made of 19 strands of 150 micron diameter each. In combination with the extra L.S.C. layer around the centre core, they have applied two very innovative technologies together to open doors to the highest quality in musical experiences. The shielding is made of 40 3T strands combined with 2 layers of multiple heavy silver coated high quality copper strands. Van den Hul's exclusive 3T technology gives a much higher resolution and richer detail, compared to any other metal technology used so far. With 4 rhodium plated RCA connectors.
The Rock 3T RCA-RCA Interconnect
The 3T The Rock Hybrid is at the moment Van den Hul's most popular balanced interconnect. The 2 centre conductors are each made of 12 x 3T conductors: 1 x 400 micron surrounded by 11 x 150 micron and in total covered with an extra L.S.C. coating. The 3 layer shielding is a combination of 2 layers made of heavy silver coated copper strands and 1 layer of L.S.C. in between used for strong damping of spurious signals. The 3T The Rock Hybrid is a very successful design with already many happy users around the world. With 4 rhodium plated RCA connectors.
The Rock 3T XLR-XLR Interconnect
The 3T The Rock Hybrid is at the moment Van den Hul's most popular balanced interconnect. The 2 centre conductors are each made of 12 x 3T conductors: 1 x 400 micron surrounded by 11 x 150 micron and in total covered with an extra L.S.C. coating. The 3 layer shielding is a combination of 2 layers made of heavy silver coated copper strands and 1 layer of L.S.C. in between used for strong damping of spurious signals. The 3T The Rock Hybrid is a very successful design with already many happy users around the world. With 4 black Neutrik silver plated XLR connectors.
The Sea 3T RCA-RCA Interconnect
The Sea Hybrid is a coaxial interconnect with technical upgrades compared to the 3T The River Hybrid. Thicker 3T single strand center conductor with a 400 micron diameter. It’s coated with a L. S. C. layer to improve signal transmission quality The shielding is made of forty 3T conductors combined with two layers of multiple, heavy silver coated, high quality copper strands. The sound character combines very high resolution with surprising dynamics improvements Van den Hul exclusive 3T technology gives you a much higher resolution and richer detail compared to any other metal technology used so far. Terminated with RCA connections.
The Second RCA-RCA Interconnect
Van Den Hul The Second Audio Cable Available Lengths: 0.8m, 1.0m, 1.2m, 1.5m C - 7.3 RCA type connectors for single-ended applications Cable Type: Quadruple screened twin core (Balanced) Conductor Material: Linear Structured Carbon Insulation/Dielectric Strength: Cores: PE foam; Jacket: Hulliflex / 300 Vrms min.
The Second XLR-XLR Interconnect
Linear Structured Carbon (LSC) quadruple screened twin core conductors. With durable light brown HULLIFLEX jacket. Produces an amazing good sound quality. With 4 Neutrik silver plated XLR connectors.
The Skyline Hybrid Speaker Cable
Flat twin-lead very pure copper and Linear Structured Carbon® coated Hybrid conductor flexible speaker cable (2x AWG 14). With sky-blue durable HULLIFLEX® jacket. Usable Connectors: B-122, BC-4.5 or D.I.Y. How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m. We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.
Flat twin-lead very flexible (2x AWG 14) speaker cable with white durable HULLIFLEX® jacket. The white jacket is made of HULLIFLEX ® 3, a superior insulation material exhibiting a very good mechanical protection and a high chemical stability. Usable Connectors: B-122, BC-4.5 or D.I.Y. How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m. We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.
The SUB Hybrid is a high quality RCA to RCA coaxial audio cable specifically designed to feed active subwoofers in home theatre and professional applications. As a member of Van den Hul's famed FUSION SERIES of interconnects, The SUB combines advanced developments in their amorphous Fusion conductor material and with their well proven Linear Structured Carbon technology to reach superior musical dynamics, timing and resolution in any subwoofer application. With durable yellow HULLIFLEX jacket and available as a single lead, box packed and terminated with 2 gold-plated high quality RCA connectors.
The Triaxial Professional 75 Ohm RCA-RCA Interconnect
Very high quality 75 Ohm impedance cable for demanding applications. Wide frequency range: up to 1 GHz. Triaxial construction. For floor connections, very low signal emission. With durable blue HULLIFLEX jacket and with 2 gold-plated RCA connectors.
The ultimate solution for the USB A-B connection of High End digital audio products. Due to the many requests Van den Hul got for an extremely high quality USB cable, they carried out extensive research to understand the digital signal and how it is affected by a conductor. Their vast knowledge on designing and producing cables, together with using the most modern technologies available has resulted in this USB Ultimate cable that will satisfy even the most demanding needs.
The Valley 3T RCA-RCA Interconnect
With 4 rhodium plated C-7.3 (RCA) connectors or 4 black Neutrik silver plated (XLR) connectors.
The Valley 3T XLR-XLR Interconnect
With 4 rhodium plated C-7.3 (RCA) connectors or 4 black Neutrik silver plated (XLR) connectors.
Coaxial interconnect with a solid core of OFC with dense silver coating. This cable is double screened with woven silver coated OFC strands separated with an additional thin metal foil. With durable green HULLIFLEX jacket. The characteristic impedance is 75 Ohm. With 4 gold-plated RCA connectors.
The UA1 USBA-B interconnect contains a SP separate flat structure that optimally manages the distance between signal and power lines. It adopts a hybrid conductor of oxygen-free copper + pure silver coating/ It features Noise control with Asahi Kasei Corporation Palshat® MU and aluminum and copper braided shields.
The UA3 USB Interconnect is a pure silver conductor (single wire) which is used for the signal line, and a high-dimensional transmission characteristic is thoroughly pursued by optimising the conductor size. Overwhelming noise control performance brought about by the adoption of Asahi Kasei Corporation Palshat®MU and a design that maximises the material performance. A Pulshat sheath, aluminum and copper braided shield are placed on each line, and noise suppression between each line is achieved by a double sheath & quad shield structure. SP separate flat structure that allows optimal management of the distance and twist status of signal lines and power lines at all times A shell shield made of copper + gold coating and a copper foil shield are used inside the connector to pursue a shielding effect all the way to the end of the cable.
The UAC USB Interconnect from AIM is designed with transmission characteristics that are less likely to change due to a unique structure. With a high-purity oxygen-free copper and pure silver coating. The connectors exhibit high noise control performance due to the inner shell shield of 100% Covered Shield and Copper Foil.
Newly developed under the N-ZERO Concept, the AIM Electronics UC1 is a cable with an optimal connector for both Type-C and Type-B devices. It uses an oxygen-free copper hybrid conductor coated with pure silver. The cable's SP separate flat structure is designed to precisely control the distance between the signal and power lines. Additionally, it incorporates a film stabiliser that provides strong shielding and manages changes in the cable's characteristics.
Oxygen-free copper + pure silver coding conductor USB A to USB C Digital interconnect for use between smartphone and DAC. This cable features separate flat structure for signal and power lines to suppress noise interference and is equipped with film stabiliser that suppresses high shielding effect and characteristic change.